Search results

3m(tm) Rejacketing Sleeve Rjs-5-10ft, 10 Ft Coil, 1 Per Case

Category: Cable Rejacketing Sleeves

MMM RJS-4-10FT REJACKETING

Category: Cable Rejacketing Sleeves

Direct Bury Splice Kit, 18 - 10 AWG, 3.660 Inch Length, UV resistant Tube Prefilled With Moisture Resistant Grease, 600 Volt Rated, Orange/Blue, For Use in Direct Burial Applications

Category: Low Voltage Direct Burial Splice Kits

Inline Splice Kit, Cold Shrink, 25/28 kV, Shielded Cable, Conductor Range: 1 AWG - 250 MCM. Cable Insulation Range Size: 0.84" - 1.36", Connector Requirements: Minimum O.D.: 0.46", Maximum O.D.: 1.36", Maximum Length: AL/CU 4.00", Copper: 4.50".

Category: Medium Voltage Cold Shrink Splice Kits

7100248793 DEADBREAK AL COMPRESSION LUG 30AL 350KCMIL 1/BOX

Category: Loadbreak / Deadbreak Accessories

Splice Kit, Cold Shrink, 35 kV, Works with Various Types of Shielded Cables, Conductor Range: 1/0 AWG - 350 MCM. Cable Insulation Range Size: 1.07" - 1.70". Connector Requirements: Minimum O.D.: 0.51", Maximum O.D.: 1.70", Maximum Length: AL/CU 6", Copper 6.50".

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG, Provides Abrasion Resistance and Moisture Ingress For 14/3 Without Ground Thru 8/3 With Ground In Direct Burial Applications

Category: Low Voltage Heat Shrink Splice Kits

Flexible Power Cable Tap Splice Kit, Single: 0.25 - 0.80 Inch, 1kV, 1/0 AWG, Multiple: 0.25 - 0.80 Inch, 600 Volt, For Use With Non-Shielded Cables.

Category: Non-Shielded Resin Splices

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

3M 5514A-350-CU QSIII SPLICE

Category: Medium Voltage Cold Shrink Splice Kits

3M 625CAK POWER CABLE CONN

Category: Loadbreak / Deadbreak Cable Adapters

3M 215LB404B LOADBREAK KIT

Category: Loadbreak Elbows

3M 228IC LOADBREAK ELBOW INS

Category: Loadbreak Elbows

Tape Splice Kits- Shielded Cable (3 Splices/kit)

Category: Medium Voltage Heat Shrink Splice Kits

7100262665 DEADBREAK EQUIPMENT CONNECTION KIT 600 A 15/25KV 1 KIT/BOX

Category: T-Body Deadbreak Connectors

3M 5411-CI-1/0 15KV SPLICE KT 15 KV SPLICE KIT

Category: Medium Voltage Cold Shrink Splice Kits

3MÖ ScotchcastÖ Multi-Mold Resin Splice Kits 85 Series are a group of versatile splice kits for insulating and waterproofing odd-sized and odd-shaped splices in underground applications, up to 1000 volts. Splices may be inline, wye, X, butt and dead-end spliceconfigurations (for non-shielded cable) using split bolts, H tap or C tap compression connectors.

Category: Non-Shielded Resin Splices

7100248804 DEADBREAK EQUIPMENT CONNECTION KIT 635EUSB4 600A 35 KV 1 KIT/BOX

Category: T-Body Deadbreak Connectors

7100248803 DEADBREAK JUNCTION BAR 35 KV 600A 4-WAY 1/BOX

Category: Loadbreak / Deadbreak Accessories

7100248442 DEADBREAK ADAPTER 35KV 1.935IN - 2.005IN (49.2 - 52.2) 1/BOX

Category: Loadbreak / Deadbreak Cable Adapters

Splice Kit, Cold Shrink, 5/8 kV, Non-shielded cable, Conductor Range: 2 AWG - 300 MCM. Maximum connector length: 4.25".

Category: Medium Voltage Cold Shrink Splice Kits

215LB507B Loadbreak Kit with Compression Lug, 200A, 15 kV

Category: T-Body Deadbreak Connectors

Molded Rubber Cable Splice Kit for 5411R/5412R Series, QS-II, 1 Conductor, 15 kV, For Use In Repairing JCN or CN Cables Up To 6 Inches

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Splice, QS-III,Cable Insulation Diameter 1.240 - 2.070 Inch, 750 MCM, Silicone Rubber

Category: Medium Voltage Cold Shrink Splice Kits