"rx-200"

200 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 120/240V, Surface Mount, Top Feed, NEMA 3R. Main Disconnect: (1) 200 Amp, 2-Pole, 10 kAIC Breaker. Includes: Test Block Bypass (Commonly used for Commercial Applications)., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

4.33" X 200' Black Ribbon

Category: Label Printer Ribbons

Releasable Cable Tie, 29.6 Inch Long, 200 Pound Tensile Strength, PA66, Yellow, 5/pkg

Category: Releasable Cable Ties

Fuse Block, 1-Pole, 30 Amp, 600 Volt AC/DC, 10 x 38 mm, Pressure Plate, Quick Connect, 200 kAIC

Category: Midget Fuse Blocks

200 Amp, General Purpose Contactor, 600 Volt Rated, 100 - 250 Volt AC/DC Coil. AF-Line Series, AF140 Frame, 3-Pole, IEC Contactor with (1) N.O. & (1) N.C. Auxiliary Contact Block.

Category: IEC Contactors - 66-Over Amp

Fuse Block, 3-Pole, 30 Amp, 600 Volt AC/DC, Class CC, Pressure Plate, Quick Connect, 200 kAIC

Category: Class CC Fuse Blocks

Fuse Holder, Dead Front, POWR-SAFE, 30 Amp, 600 Volt AC/DC, Class CC 200 kAIC, 3-Pole, Non-Indicating

Category: Class CC Finger Safe / Dead Front Fuse Holders

200" Fish Tape, Zoom, Diameter: 3/16", Case Diameter: 16", End Type: Eyelet, Radial Steel Core Twisted Wires, Material: Nylon Jacketed Stainless Steel

Category: Steel Fish Tape

Remote CT Kit, 250 VAC, 200 Amp, 20 AWG ***Must Be a Certified SPAN Installer to Install and Commission SPAN Panels***

Category: Solar Monitoring Accessories

Eaton Bussmann series LP-CC fuse, Current-limiting time-delay fuse, Rejection style, 1.5 A, Dual, CC, Non-indicating, Ferrule end x ferrule end, 12 sec at 200%, 20 kAIC at 300 Vdc,200 kAIC at 600 V, Melamine tube, 10, 600 V, 300 Vdc

Category: Class CC Fuses

Eaton Bussmann series LP-CC fuse, Current-limiting time-delay fuse, Rejection style, 2.5 A, Dual, CC, Non-indicating, Ferrule end x ferrule end, 12 sec at 200%, 200 kAIC at 600 V,20 kAIC at 300 Vdc, Melamine tube, 10, 600 V, 300 Vdc

Category: Class CC Fuses

Deep Strut - Elongated Holes on Back, Height: 1-5/8", Width: 1-5/8", Material: Steel, Finish: Pre-Galvanized, Gauge: 12, Length: 20 feet. Color: Silver.

Category: Steel Strut with Elongated Holes

200 Amp Solar Ready Meter Center, Ring Style, 4 Jaws, 1-Phase, 120/240 Volt AC, 22 kAIC, 30/42 Distribution, 200 Amp Main Breaker Included CSR2200N, 225 Amp Buss Rating, BR Type Branch Breakers, UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - Solar Ready

Printer Ribbon, B30 Series, Wax/Resin, Type: R4300 Series, Special Features: Smear-Resistant, Chemical-Resistant, Color: Black, Length: 200 Feet

Category: Label Printer Ribbons

Fuse, 200 Amp, Class J, Dual-Element, Time-Delay, 600 Volt, LOW-PEAK, 10 Seconds (Minimum) Time-Delay at 500% Rated Current; 300,000A Interrupting Rating

Category: Class J Power Fuses

200 Amp, 1-Phase, 120/208/240V AC, 3-Wire, Series 1000, Two Element Meter, Line-to-Line, 200:0.1A Ratio, NEMA 1, Surface Mount Enclosure, Includes: (2) 200A Split-Core Current Transformers

Category: Submeters with Current Transformers

Manual Bypass Kit, Used With 200 AMP Sockets in 1MP, 1MM, and 3MM Modular Metering Stacks (Ring Style Sockets Only); MB Style Meter Breakers. For use with 200 Amp Sockets only.

Category: Group Metering Bypass Kits

200 AMP, 120/240V AC, 1-Phase, Plug On Neutral, Main Breaker Loadcenter, 25 kAIC, 42-Space, 84-Pole, Copper Bus, NEMA 1 - Indoor. Dims: H: 37", W: 14.31", D: 3.88"

Category: 1-Phase Main Breaker Copper Bus Load Centers

Fuse Holder, Dead Front, POWR-SAFE, 30 Amp, 600 Volt AC/DC, Class CC 200 kAIC, 1-Pole, Non-Indicating

Category: Class CC Finger Safe / Dead Front Fuse Holders

200 Amp Fuse, Semiconductor, Brand or Series: L50S, Type: Bolt Mount, Voltage Rating: 500 VAC, 450 VDC, Interrupting Rating: VAC 200000 RMS Amp VDC 20000 Amp, Dimensions: 1 1/2 Diameter x 4 11/32 Length Inch, Material: Fiberglass Body, Features: Very Fast Acting

Category: Semiconductor Fuses

Fuse Block, 2-Pole, 30 Amp, 600 Volt AC/DC, Class CC, Box Lug, 200 kAIC

Category: Class CC Fuse Blocks

Eaton Bussmann series FRN-R fuse, 250 Vac, 125 Vdc, 15A, 200 kAIC at 250 Vac, 20 kAIC at 125 Vdc, Non Indicating, Current-limiting, time delay, Ferrule end X ferrule end, Class RK5 - FRN-R-15

Category: Class RK5 Fuses

Eaton Bussmann series Class T modular fuse block, CR, 300 Vac/Vdc or Less Control Systems, 300 Vac/Vdc or Less Individual Control Circuits, 31-60 A, Three-pole, Class T, 200 kA, Box lug, 200 kAIC, Glass polyester, 300 Vac/dc, #2 AWG Cu/Al

Category: Class T Fuse Blocks

200 Amp Fuse, Time Delay, Brand or Series: Class J, Indicator, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, Terminal Type: Bolt Mount, Dimensions: 1 1/2 Diameter x 5 3/4 Length Inch, Voltage Rating: 600 VAC, Material: Stone Sand and Granular Quartz Filler, Features: Time Delay Dual Element, Visual Indicator

Category: Class J Power Fuses