"ct-4"

The CM-CT 100/5 is a plug-in current transformer from the CM-CT range. The current transformer has a rated primary current of 100 A and a secondary rated current of 5 A. The burden of the current transformer is 2.5 VA and its precision is according to class 1. The CM-CT 100/5 will be delivered with foot angle, insulating protective cap and bar fastening screws. A snap-on mounting for DIN rail is avaiable as accessory.

4 pole front mounted instantaneous auxiliary contact block with 4 NO contacts

Category: Starter & Contactor Auxiliary Contacts

Submersible Inline Connector, 2/0 - 14 AWG, Aluminum With EPDM Rubber Insulation, Black, Rate for CU/AL Conductors

Category: In-Line Splicers/Reducers - Submersible

Aluminum H-Tap Connector, Wide Range, Industry Standard Size Code 1, Conductor Range Main ASCR #2, #4, #6, Stranded #1, #2, #3, #4, #6, Solid #2, #4, #6 TAP ASCR #2, #4, #6, Stranded #1, #2, #3, #4, #6, Solid #2, #4, #6 Die O

Category: H-Tap Press-On Lugs

4 Inch Square Box, Welded, 2-1/8 Inch Depth, Side Knockouts: (8) 1/2 Inch, (4) 3/4 Inch, Bottom Knockouts: (3) 1/2 Inch, (2) 3/4 Inch, 30.300 Cubic Inches, Steel, Includes 10 Inch #12 AWG Solid Ground Pigtail

Category: 4" Square Metallic Boxes

LENOX 2-3/4 Carbide Hole Cutter

KEL SEC75B452 4 HOLE NM 3/4" NON METALLIC CORD GRIP

Refill Cartridge, Indoor/Outdoor Vinyl, Dimensions: 0.75" X 21', Color: Black on Yellow, Compatible With: Brady BMP 21, ID PAL, LABPAL Printers

Category: Permanent Tapes

PDT CT-2940/STBT PDT-LUG CT-2

4-11/16 Inch Gang Box Device Cover, 4-Gang, 15/16 Inch Raised, Steel

Category: Metallic Gang Box Covers

1-1/4IN STEEL CHASE NIPPLE USA

Category: Steel Chase Nipples

25ft Compact Wide Blade Magnetic Tape Measure, Magnet holds to EMT & Steel Studs, 2-Sided Printing, Lanyard-Ready for Quick and Easy Tethering

Category: Tape Measures & Rulers

EMT Compression Connector, Size: 1-1/4 Inch, Zinc Die Cast, For Use With EMT Conduit

Category: Zinc Die Cast Concrete Tight EMT Compression Connectors

Switch/Outlet Box, 1-Gang, Old Work, Thermoset Fiberglass, Depth: 2-7/8". Cubic Inches: 16.0". Includes: Ears, Snap Brackets, Clamps

Category: Non-Metallic Old Work Switch / Outlet Boxes

Dual Rated Ground Clamp, Clamp Material: Aluminum, Screw Material: Steel, Wire Range: 14 AWG (Solid) - 1/0 AWG (Stranded), Pipe Size: 1/2" - 1".

Category: Bare Wire Ground Clamps

4" LED Downlight, Retrofit, 10 Watt, 120V, 750 Lumens, Color Temperature: 3000K, White Trim

Category: 4" Recessed LED Downlights

Metering Enclosure, 2-Door, NEMA Type 1, Material: Steel, Dimensions: 36" x 36" x 12"

Category: Current Transformer Hinged Cover Enclosures

Handy Box, 1-Gang, 3/4 Inch Knockouts, 4 x 2-1/8 x 2-1/8 Inch Deep, 14.500 Cubic Inches, Steel With Pre-Galvanized Finish

Category: Metallic Handy Boxes

ProLED Select Retrofit Downlight 4 Inch Round Replaceable Baffle Trim, Black

Category: 4" Baffle Recessed Lighting Trims

Cable/Conduit to Stud Attachment, 1" EMT, 2 1/8" Box Depth. Standard Package Quantity: 100.

Category: Conduit to Stud Supports

4 Inch Trim Step Baffle, White Trim with Black Baffle, For Use With H99 Recessed Housing

Category: 4" Baffle Recessed Lighting Trims

Resin Splice Kit, In-Line, Non-Shielded, Conductor Range: 3/0 AWG - 400 MCM, Maximum Conductor O.D.: 1.563", Maximum Connector O.D.: 1.000". For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Single Gang Hole Cutter, Allows to Quickly Cut Out Single Gang Device Holes. The Q-Bit Is Built To Work With Any Standard Oscillating Tool. Mfg Note The Q-Bit is designed to cut drywall only. It is NOT designed for wood, plaster, masonry or other similar material.

Category: Device Box Hole Saws

(1) Circuit Directory, Adhesive Backed. For use with BR and CH Series Loadcenters

Category: Load Center Circuit Labels