"f4p ilc750-4"

1-1/4 Inch Rigid 304 Stainless Steel 90 Degree Elbow

Category: Rigid 90° Conduit Elbows

10 Amp, D15 Series, Freedom, 600 Volt, Relay, 4-Pole, 3 Normally Open, 1 Normally Closed, Contacts, 120 Volt AC Coil

Category: 4-Pole Definite Purpose Contactors

Patch Cord, 4 Pair / 23 AWG, CM, CAT 6, RJ45, Strain-Relief/Snag-Proof Boot, Unshielded, Twisted-Pair, Yellow, Length: 10 ft.

Category: Category 6 Patch Cords

Driving Stud for Sectional Ground Rods, 3/4", Steel, 2" Long

Category: Ground Rod Drive Studs

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight 45 DEG Connector With Lug, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-7/8 IN Width, Dimension A: 1-3/4 IN, 1-3/16 IN Turning Radius Gland Nut, 9/16 IN Thread Length, Third Party Certification: UL File Number E-24264, CSA 9795, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

4" LB Hub, Aluminum Mogul Conduit Body, With Cover & Gasket, Aluminum, Copper Free (less than 4/10 of 1%), Powder Epoxy Paint, Gray

Category: Type LB Aluminum Conduit Bodies

Bushing, 3/4 Inch, Press-on, Insulating, Threadless, Non-Metallic. For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

Conduit Body, Type LB, 3/4 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LB Iron Conduit Bodies

Conduit Body, Type: LL, FM8, Size: 3/4 inch, Material: PVC Coated Iron. Includes: Cover & Gasket, Dimension A (Inches): 5.60 Dimension B (Inches): 1.73 Dimension C (Inches): 2.35 Dimension D (Inches): 1.19 Dimension E (Inches): 3.94 Nominal Weight (Pounds): 2.1

Category: PVC Coated Type LL Conduit Bodies

EMT Combination Coupling, Rigid to EMT, 4 Inch Diameter, Steel With Zinc Finish

Category: Steel Rigid To EMT Combination Couplings

Wide Slot Wiring Duct, 4 Inch Wide x 3 Inch High x 6 Foot Long, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

EV Charging Base Foundation, Tier 15 Rated, 24-3/8 x 18 x 18 Inch, 4 Inch Conduit Ports, Polypropylene Body With Cast Aluminum Lid

Category: EV Charger Mounting Mechanisms

5 Circuit Terminal Block For Renovation Loadcenter

Category: Load Center Filler Plates

Thin wall heat shrink, .12" (3.2mm) diameter, red cross-linked polyolefin, 25 pc. package quantity.

Category: Thin Wall Heat Shrink

Eaton toggle switch, #14-10 AWG, 15A, Residential, Wall, 120V, Side and push, Grounding, Light almond, Four-way, Polycarbonate

Category: 15 Amp Industrial Grade Toggle Switches

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

Field Configurable Small LED Flood Light: 20/25/30/35 Wattage Selectable (Up to 100-175W HID Equiv.), 2,500 - 4,800 Lumens (Depending on Wattage/CCT selected), Selectable Color Temperature: 3000K/4000K/5000K, Selectable Photocontrol included, 120-277V, Knuckle and Trunnion Mount Included, Bronze.

Category: Outdoor LED Flood Lighting

Eaton Arrow Hart extra heavy-duty angled plug, Replacement use, #12-4 AWG, 30A, 125/250 V, Back wire, Gray, Brass, Nylon, Thermoplastic, 10-30P, Three-pole, Three-wire, Screw, Nylon, Thermoplastic, .

Category: 30 Amp Straight Blade Plugs

Eaton Toggle wallplate, White, Toggle Cutout, Polycarbonate, Four- gang, Mid-size

Category: 4-Gang Toggle Switch Wallplates

3/4" Resi-gard Q.c. Threaded Adapte

Category: PVC Box Adapters

Compression Tap, Aluminum, Main Range 4/0-3/0, Tap Range 4/0-3/0, Tin Plated, UL

Category: H-Tap Press-On Lugs

4-1/4" Round Cover, Metallic, Cover Type: Brass or Aluminum cover plate (1/2" Opening). Device Type: Communications or Power Cover Plate. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Service Post Connector, Male Type SSS, 3/0 - 4/0 AWG, Cable Range 0.410 - 0.528 Inch, Bronze, For Use Connecting 1 or 2 Conductors to External Stud or Tapped Hole.

Category: 2-Wire Service Post Connectors

1 Ft. x 4 Ft. LED Recessed Flat Panel, Backlit, 120-277 Volt, Selectable Lumens & CCT, 3000/3500/4000 & 3500K/4000K/5000K, Dimmable

Category: LED - Flat Panels