"b610-06-070-06 jmc steel group"

One-piece consoles TP, material: Enclosure: Sheet steel 1.5 mm, Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in PU seal, Mounting plate: Sheet steel 3.0 mm, surface: Enclosure, cover and door: Dipcoat-primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure, solid back and sides, Door or double door at front, with locking rod, Mounting plate, Cover hinged at rear, 2 stays with automatic locking. Automatic unlocking on the left, manual unlocking on the right, Open base for individual cable entry, description: One-piece TP consoles, ready-to-assemble unit with high protection category IP 55 in four different widths., produkt group: Console systems for ergonomic functionality at the human/machine interface.

3-Gang, 2-Toggle 1-Duplex Device Combination Wallplate, Standard Size, 302 Stainless Steel, Device Mount - Stainless Steel.

Category: Toggle Switch / Duplex Receptacle Combination Wallplates

Threaded Conduit Nipple, 1-1/4 Inch x Close, Stainless Steel

Category: Stainless Steel Conduit Nipples

Square Box Cover, 4 Inch Square x 1 Inch Raised, Pre-Galvanized Steel, Center Blanked with Tapped Ears on 2-23/32 Inches Centers

Category: 4" Square Metallic Box Fixture Covers

2-gang No Device Blank Wallplate, Standard Size, 302 Stainless Steel, Strap Mount, - Stainless Steel

Category: 2-Gang Blank Wallplates

Conduit Locknut, 4 Inch, Threaded, Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Rack-Mount Steel Shelf, 19.00x18.00, Black, Steel

Category: Rack Shelves

3 Inch Type 304 Stainless Steel Rigid Conduit, 10 Foot Length, Includes Standard Threaded Coupling

Category: Straight Stainless Steel Rigid Conduit

Threaded Conduit Nipple, 1/2 Inch x 4 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

1-Gang Toggle Device Switch Wallplate, Standard Size, Material: 302/304 Stainless Steel, Device Mount - Color: Stainless Steel.

Category: 1-Gang Toggle Switch Wallplates

Deep Strut - 9/16" x 1-1/8" Elongated Holes - 2" Centers, Steel, Pre-Galvanized, Size: 1-5/8" Wide, 1-5/8" High, 10' Long, 14 Gauge

Category: Steel Strut with Elongated Holes

nVent CADDY Cablecat J-Hook with Hammer-On Flange Clip, Swivel, Steel, Spring Steel, 3/4" dia, 5/16"–1/2" Flange

Category: J-Hook From Wire/Rod & Beam

Mounting Plate Rail, Steel, 1 6/7" Rail Length

Category: Rack Mounting Kits & Hardware

Chase Nipple, 1/2 Inch, Insulated, Steel, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Steel Chase Nipples

Pan Head Machine Screw, Stainless Steel, Phillips, #10-24 x 1/2 Inch

Category: Phillips Pan Head Machine Screws

Eaton Crouse-Hinds series S Series snap switch cover, Sheet steel, Two-gang, For flush general use snap switches with square handles

Category: Steel FS & FD Device Box Covers

Deep Strut with Slots, Type 316 Stainless Steel, 1-5/8" x 7/8" x 10'

Category: Stainless Steel Strut with Slots

Wide Range Cord Grip, Dust Tight Strain Relief, Straight Male, Insulated, Galvanized Steel Grip, Thread Size: 3/4 Inch NPT, Cable Diameter: 0.520 Inch - 0.730 Inch.

Category: Single / Double Weave Strain-Relief Grips

Liquidtight Strain Relief Connector, 1/2 Inch, Straight, Cord Range 0.125 to 0.375 Inch, Throat Diameter 9/16 Inch, Steel Body, Glandnut, and Grip, Rubber Bushing

Category: Straight Steel Cord Grips

Fender Washer, Stainless Steel, 1/2 x 2 Inch

Category: Stainless Steel Fender Washers

OTV 163 W STEEL MSGNR GENERAL CABLE 00.41JO.27534 16/3 W/STEEL MESSENGER

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Steel Pilot Device Enclosures

Fender Washer, Size: 5/16 x 1-1/2 Inch, Stainless Steel

Category: Stainless Steel Fender Washers

Reducing Bushing, Threaded, 1-1/4 x 1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings