"EINWEG-LICHTSCHRANKE 24VDC REICHW.30M"

LED Standard Grade COB seamless tape light: 24VDC, 2700K, 100 Feet Length (Cuttable every 1.97” with 16.4ft max run), 180 Lumens/Foot, 2.19 Watts/Foot, IP54 Rating, 90+ CRI.

Category: Tape LED Lighting

Cmc Type F Fvnr 8-12a B-mmp B-cont 1no 24vdc

Category: Combination Manual Motor Controllers

Digital Output Module, 16 DO: 24VDC, 0.5A

Category: PLC I/O Modules

DC-UPS Control Unit 24VDC, 10A For Battery Sizes From 3.9Ah to 40Ah

Category: Uninterruptable Power Supply Interface Devices

DC-UPS CONTROLLER 24VDC 20A FOR 3.9-150AH BATTERY

Category: DIN Mount Uninterruptable Power Supplies

Interface Module, CS31 Slave, 8 DI: 24VDC, 16 configurable DI/DO: 24VDC 0.5A, Extendable by up to 7 I/O modules

Category: Power Interface Relays

Mini-Beam: Emitter, Range: 30m, Input: 10-30VDC, Output: Not Applicable - No Outputs, 2m (6.5 ft) Cable

Category: High Performance Photoelectric Sensor Power Bases

Conduit Body Cover, Type Screw-On/Flat Cover, Form 35, Diameter 1 Inch, Stamped Steel, Furnished With Stainless Steel Fastening Screws

Category: Steel Conduit Body Covers

WAG 750-1417 8 DI 24VDC LSS

8 Pin, Timing Relay, 240V Rated, 10 Amp, DPDT, 120V Coil, Range: 12 sec to 20 mins. On Delay, 0.2 to 20 mins. Off Delay, Repeat Cycle, Independent On & Off, Digital CMOS Design, Transient Protected.

Category: 8-Pin Timing Relays

Conduit Body Cover, Type: Screw-On, Series 5, Size: 1 Inch, Material: Steel

Category: Steel Conduit Body Covers

1 SHEET STEEL CONDUIT BODY COVER WITH GASKET

Category: Aluminum Conduit Body Covers With Gaskets

OTV TTSIM-1A-24VDC

LED Driver: Input Voltage; 100-277VAC, Output Voltage; 24VDC, Wattage: 6W Min - 60W Max, Class 2 Dimmable; Low-Profile Constant Voltage Driver. Dimmable with Standard TRIAC, MLV, and ELV Dimmers, Forward Phase and Reverse Phase Compatible, Suitable for LED Lighting, Rating: Class 2; Class P; Type HL; FCC Compliant; cULus Listed; Damp location

Category: LED Driver Power Supplies

All-In-One Dimmer + Driver: 24V/100 Watt LED Dimmer Switch + LED Power Supply in One; 120VAC Input- 24VDC Output; Fits in Standard Single Gang Boxm Includes 3 Faceplates: Gloss White, Gloss Almond, Gloss Brown (Trim Plate Not Included). SWITCHEX is Compatible With Most 24VDC Tape Lights and Fixtures ***Not Compatible With STL Series Tape Lighting***

Category: LED Dimmer/Driver Combo

Remote Reset Module, 24VDC

Category: Overload Relays - Electronic Type

LED Driver: Input Voltage 100-277VAC, Output Voltage 24VDC, Wattage: 3W Min - 30W Max, Class 2 Dimmable Low-Profile Constant Voltage Driver. Dimmable with standard TRIAC, MLV, and ELV dimmers. Forward phase and reverse phase compatible. Suitable for LED lighting. Class 2; Class P; Type HL; FCC Compliant; cULus Listed; Damp location.

Category: LED Driver Power Supplies

Interface Module, Modbus TCP Server, 4 AI: U, I, RTD. 2 AO: U, I. 8 DI: 24VDC, 8 DO: 24VDC 0.5A

Category: Power Interface Relays

LED Driver: Input Voltage; 100-277VAC, Output Voltage; 24VDC, Wattage: 9.6W Min - 96W Max, Class 2 Dimmable; Low-Profile Constant Voltage Driver. Dimmable with standard TRIAC, MLV, and ELV dimmers. Forward phase and reverse phase compatible. Suitable for LED lighting. Rating: Class 2; Class P; Type HL; FCC Compliant; cULus Listed; Damp location.

Category: LED Driver Power Supplies

Dimmable 24VDC Power Supply: 120VAC, 47-63Hz. Input, 12VDC, 2.5A output, 12W Minimum load, 60W Maximum load. Dimmable with standard TRIAC, MLV, and ELV dimmers, Forward phase and reverse phase compatible.

Category: LED Driver Power Supplies

Ethernet Switch, 5 Port, Unmanaged, 24VDC, 10/100BaseTX, DIN Rail Mount

Category: Routers & Switches - Industrial

AX521:S500,Analog I/O.Mod.4AI/4AO,U/I/RT 12bit+sign,24VDC,2/3-wire

Category: Programmable Logic Controllers

General Purpose Relay, 24V DC Coil, DPDT, Contact Rating: 15 Amp. Terminal Style: 8 Blade, Plug-In. Maximum Switching Voltage: 300V. Full Featured: Locking Pushbutton, LED, Removable ID Tag, Flag Indicator, Finger-Grip Cover

Category: 8-Blade Ice Cube Relays

Dual Technology Ceiling Occupancy Sensor: 24VDC/VAC, 43mA, 360°. The DT-300 works with low voltage momentary switches to provide ON/OFF manual control & contains an isolated relay with N/O and N/C outputs; rated for 1 Amp @ 30 VDC/VAC. Built-in light level sensor – works from 10 to 300 foot-candles.

Category: Passive Infrared Wall Switches