"nm2048-2 co"

Device plate that will accept up to six (6) Extron Electronics MAAP style plates. For use in the center compartment only. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Polycarbonate duplex cover plate with flip lids for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Bronze

Category: Round Recessed Box Covers

Flangless cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Aluminum

Category: Square / Rectangle Recessed Box Covers

A radiused insert for the ALA3817 and ALA4817, ALA3817N, ALA4817N, ALA3818, and ALA4818 fittings to provide a bend radius of 2" (51mm) for Fiber Optic/Category 5e installations. The insert is ideal for new and retrofit applications whether the cable installation is lay-in or pull-through

Category: Metallic Raceway Clips & Couplings

Accepts standard 15A and 20A duplex receptacles. NOTE: Standard size for device plates for Plate Location 3 is 5 7/32" (132mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates

WMD FPB-2RT DBL GANG PLATE W/

Category: Poke-Through Mounting Plates

Tele-Power Pole, Two-Compartment, Nominal Thickness: 0.50 Inch, Length: 10 Feet 5 Inches, Factory Wired with (1) 20 Amp, 125 Volt Dedicated/Isolated Ground Duplex Receptacle and (1) Standard 20 Amp, 125 Volt Duplex Receptacle, Opening for Communication and 1/2 Inch Hole for Power is Provided at Top, 8 Inch Cover at Top Front of Pole is Removable For Making Power Wiring Connections.

Category: Aluminum Power Poles

4-1/4" Round Cover, Metallic, Cover Type: single door. Device Type: Duplex Receptacle. Color: Brushed Aluminum. For use in Carpet Applications.

Category: Round Recessed Box Covers

ModPower Primary Unit, In Surface, Connect Up To Six Of Our Power Units Together To Create A System Of Power For Training Spaces, Workstations Or Flexible Spaces, (3) Straight Blade Tamper-Resistant Receptacles & (2) USB Ports (1 USB-A, 1 USB-C), 10 Ft. Cord Length, White

Category: Commercial Grade Power Strips

Six rear outlets, 15A, 6' (1.8m) cord. Receptacle center-to-center 1 1/2" (38mm).

Category: General Duty Power Strips

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Six rear outlets, 15A, 15' [4.6m] cord. Receptacle center-to-center 1 1/2"[38mm].

Category: General Duty Power Strips

This box has a 5" (127mm) depth design with an extra 2" (51mm) of width for additional wiring capacity and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Plug-In Outlet Center Unit, Length: 13 Inch, Width: 2 Inch, 6' Cord, 4 Individually Switched Outlets, Lighted On/Off Switch.

Category: Commercial Grade Power Strips

20A configuration. Four outlets, white finish. 6' (1.8m) cord. Length 10 3/4" (237mm). Receptacle center-to-center 1 1/2" (38mm). cTUVus Listed as Medical Electrical Equipment. Suitable for use where Article 517 of the NEC requires Hospital Grade Outlets.

Category: Medical Grade Power Strips

Two duplex KOs. For AC8840 and AC8104 Boxes. NOTE: AC8840 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

Six front outlets, 15A, receptacles rotated 90 degrees and spaced to accommodate transformers. 15' (4.6m) cord. Receptacle center-to-center 1 1/2" (38mm).

Category: General Duty Power Strips

Floor Box Assembly, 1-Gang, Nickel. Includes Divider, 15A Receptacle with One Opening and (2) Screw Plugs

Category: Assembled Recessed Gang Boxes

Plug-In Outlet Center Unit, Length: 13 Inch, Width: 3-1/2 Inch, 15' Cord, 10 Outlets, Lighted Switch.

Category: General Duty Power Strips

W-mold Nm24gba612 4w20a Plug- mold Non-metal

Category: Single Circuit Non-Metallic Plugmold

Unit includes one (1) 15A black tamper-resistant duplex receptacle with two (2) USB ports that provide 3.1A. Unit comes with a 6' [1.83m] cord. Comes with a brushed stainless steel finish.

Category: Assembled Recessed Countertop Boxes

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (9) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

6' Plugmold Plus Multioutlet Strip comprised of eight 9 inch parts, GBA

Category: Single Circuit Non-Metallic Plugmold

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Beige

Category: Non-Metallic Overfloor Raceway