"ab-10106rbg the austin co."

Replacement Blades And Bit For The Adjustable Hole Saw With Auto-Set Arms (Cat. No. 53710), The Adjustable Hole Saw With Auto-Set Arms Provides Smooth Cuts From 2 To 7-Inches (5.1 To 17.8 Cm) In Drywall And Ceiling Tile, Features Integrated Gears For Easy Blade Adjustment And Centered Pilot Bit, Replacement Kit Comes With 2 Blades, 1 Pilot Bit, 2 Hex Keys, 4 Washers, 2 End Screws And 1 Set Screw, Using The Large Hex Key, Remove And Replace End Screw, Washers, And Blade, Using The Small Hex Key, Remove And Replace Pilot Bit Set Screw And Pilot Bit, After Replacing, Ensure All Screws Are Fully Seated And Snug-Tight Before Using The Adjustable Hole Saw With Auto-Set Arms To Cut Drywall Or Ceiling Tile

Category: Hole Saw Adapters

Beam Clamp, Malleable, 2", 2-1/16" High, 3/8-16 Threads, Hot Dipped Galvanized

Category: Beam Clamps - Adjustable

Kwik Change Arbor, Sizes: 5/8" - 2-1/4"

Category: Hole Saw Arbors

15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Duplex Receptacle/Outlet, Straight Blade, Grounding, Quickwire Push-In & Side, Standards and Certifications: UL/CSA, Warranty: 2 Year Limited, NEC compliant – Brown

Category: Tamper Resistant Residential Grade Receptacles

Wallplate, Telephone Jack, 1-Gang, 6P4C, Screw Terminals, Color: White.

Category: Phone Wallplates

Measuring Tape, Pull Line, Printed Measurements Every Foot & Anti-Skid Pads, Length: 3,000 ft, Diameter: 3/16 Inch, Tensile Strength: 170 lbs

Category: Measuring Pulling Tape

15 Amp, 120 Volt, Toggle Framed Single-Pole AC Quiet Switch, Residential Grade, Grounding, Quickwire Push-In & Side Wired - Light Almond.

Category: 15 Amp Residential Grade Toggle Switches

15 Amp, 120 Volt, Toggle Framed 3-Way AC Quiet Switch, Residential Grade, Grounding, Quickwire Push-In & Side Wired - Ivory.

Category: 15 Amp Residential Grade Toggle Switches

M210 Portable Label Printer Kit, Auto-Format Labels With 11 Pre-Loaded Application Design Guides For Rapid And Accurate Label Creation, Military-Grade Shock And Vibration Resistance Per MIL-STD-810G Method 5.16.6 SA4.6.5 – Drop Tested To Withstand The Roughest Job Sites, Easy-To-Access Hot Keys And Menus For Fast Label Creation, On-Board Symbols And The Ability To Store 12 Label Files Up To 2MB, Ability To Create UPC, DataMatrix, And QR Codes, Onboard Label Material Gauge Tracks The Amount Of Material Left In The Cartridge, Includes: (1) AC Adapter/Battery Charger (M210-AC), (1) M210 Label Printer (M210), (1) M21 Series Nylon Cloth Patch Panel and Wire and Cable Labels (M21-750-499), (1) Li-ion Rechargeable Battery (M210-BATTERY), (1) Quick Start Guide, (1) Replacement Power Cord - North America & (1) Hard Case (M210-HC)

Category: Portable Label Printers

Quad-16 Deep Well Heavy-Duty Impact Flip Sockets Contain 16 Hex Sizes Combined Into 4 Color-Coded Sockets, Spring-Loaded Action Allows For Hands-Free Access To Either Hex Size By Simply Applying Pressure To The Smaller Socket To Compress It Out Of The Way, Heavy-Duty Impact Sockets Are Made Of Heat Treated Cold Forged Steel For Long-Lasting, High Torque Applications, Industry-Standard Color-Coded Painted Rings To Quickly Identify Hex Sizes, Deep Well Sockets Are Ideal For Managing Extended Threads, Recessed Bolts, And Confined Spaces, Offering Exceptional Reach And A Reliable Grip, Store The Small (1/4 To 7/16-Inch) And Medium (1/2 To 11/16-Inch) Quad-Sockets On The Long 1/4-Inch Shaft To Efficiently Swap Between Any Combination Of 8 Hex Sizes For Speed On The Job, Modbox™ Accessory Case, A Modular And Organized Storage Solution Designed For Easy Access On Any Job, Featuring A Small Parts Storage Tray For Fasteners And Bits

Category: Sockets & Socket Sets

The 120 V 50/60 Hz. 1800 Watt "T" Stem Mounting The K4100 & K4400 Series Photo Controls feature stem mounting, thermal-type, controls with single and multi-voltage models. Thermal-type photo controls provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights, and lighting. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bimetal and composite resistor for reliable long life operation over ambient temperature extremes. These models are California Title 24 compliant.

Category: Stem Mounted Photo Controls

Strain-Relief Boot, Snag-Proof, RJ45, Color: Blue, Includes: (100) Boots. The boots protect against damage to the connector latch and help maintain the proper bend radius of the cable to ensure performance

Category: Modular Plug Boots

1-Gang, (1) 1.600 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color/Finish: White.

Category: 1-Gang Single Receptacle Wallplates

Interconnectable Ion Smoke & CO Alarm, Hardwired w/10-Year Battery Backup, 120 Volt AC

Category: Combination Smoke & Carbon Monoxide Detectors

Wallplate, QuickPort, 1-Gang, 4-Port, Box Mount, Color: White.

Category: Snap-In Wallplates

Modbox™ Components Easily Interconnect For A Customized Mobile Workstation, Easily Attach And Move The Magnetic Strip Onto Any System Side Rail With One-Handed Release For Added Convenience, Keep Commonly Used Tools Accessible And Within Close Reach, Powerful, Rare-Earth Magnets Keep Tools Secure, Even When The System Is In Motion, Large 7-Inch Magnetic Surface Area For Ample, Secure Tool And Fastener Storage, Made With Tpv Overmold For Durability And A Soft Feel, Withstands Tough Work Environments, Secure The Magnetic Strip Inside The Rolling Toolbox And Medium Toolbox (Cat. Nos. 54802Mb, 54803Mb) With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately

Category: Components Kits

Carbide Tipped Cutter Kit, Diameters: 7/8" (22 mm), 1-1/8", 1-3/8", 1-3/4", 2", Includes: Cutter Heads, Arbor, Hex Key, Case

Category: Carbide Tipped Hole Saws

Carbide Tipped Hole Saw, Diameter: 1-3/8", Chuck Size: 3/8", Conduit Size: 1"

Category: Carbide Tipped Hole Saws

1-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoset, Device Mount - Color: Ivory.

Category: 1-Gang Toggle Switch Wallplates

BEHIND-THE-HEAD EARMUFFS

Category: Safety Earmuffs

MODbox™ Components Easily Interconnect for a Customized Mobile Workstation, Easily Attach and Move the Tool Carrier Onto Any System Side Rail With One-Handed Release, Keep Fasteners And Connectors Easily Accessible At The Jobsite, Clear Lid, Perfect For Small Items Such As Wire Connectors, Fasteners, Anchors, And More To Keep Your Workspace Organized, Secure The Parts Bin Inside The Rolling Toolbox And Medium Toolbox With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately

Category: Components Kits

Socket Set Contains Most Common Standard Deep-Well Impact Socket Sizes Up To 1-Inch, Deep-Well Slim Profile Impact Sockets Provide Increased Access And Reach For Longer Bolts And Hard To Reach Areas, Klein Knect™ (M) Specialized Adapter Allows Any 1/2-Inch Drive Sockets To Be Used On The Knect™ (M) Pass Through Socket Wrench, Clearly Stamped Size Markings With White In-Fill And A Color-Coded Ring Ensure Easy Socket Size Identification, Includes A 3-Inch (7.6 Cm) Long 1/2-Inch Drive Impact Adapter Which Allows The Socket To Be Used With A 1/4-Inch Impact Driver, Cold Forged, Heat Treated Cr-Mo Steel Impact-Rated Sockets Are Engineered To Withstand The Torque Of The Toughest Jobs, Compact, Modular Storage System Is Designed To Nest Neatly Within The Klein Modbox™ System

Category: Sockets & Socket Sets

1-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color: Ivory.

Category: 1-Gang Toggle Switch Wallplates

Through-The-Wall Fan, CFM: 200, Sones: 7.5, Duct Size: 8", Color: White, Includes: Built-In Damper

Category: Through-The-Wall Fans