"esslk-2/0 industries, llc"

Toggle Switch, Bat Handle Type, DPST, Maintained Contact, Circuit Functions: On Off, 20 Amp @ 125V AC, 10 Amp @ 250V AC. Metallic Toggle, 1/4" Quick Connect Terminal. Mounting: Bushing, 15/32".

Category: 2-Pole Toggle Switches

Toggle Switch, Bat Handle Type, DPST, Maintained Contact, Circuit Functions: On Off, 16 Amp @ 125V AC, 8 Amp @ 250V AC. Metallic Toggle, Screw Terminal. Mounting: Bushing, 15/32".

Category: 2-Pole Toggle Switches

NSI KC12-2/0 U-TYPE DIE #2/0

Category: Wire Crimping Dies, Adapters, & Blades

Polaris Vision Tap™ Insulated Tap Connector, 2 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Plastisol, Clear

Category: Dual Sided Entry Wire Connector Blocks

Toggle Switch, Bat Handle Type, DPDT, Maintained Contact, Circuit Functions: On Off On, 20 Amp @ 125V AC, 10 Amp @ 250V AC. Metallic Toggle, Screw Terminal. Mounting: Bushing, 15/32".

Category: 2-Pole Toggle Switches

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 4, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Photocontrol, Stem Mount, 208-277 Volt, 2000 Watt

Category: Stem & Swivel Mounted Photo Controls

Offset Pin Terminal 2/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

Copper Compression Lug, Conductor Size: 4/0 AWG, 1-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 1-Hole Long Barrel Copper Compression Lugs

Polaris Vision Tap Insulated Tap Connector (Dual Sided Entry), 600 MCM - 6 AWG, 2 Conductors, 600V, Clear, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Submersible Multi-Tap Connector, Pedestal Type, 1 Side Entry, 2/0 - 14 AWG, 3 Port, Aluminum/EPDM Rubber, For USe With CU/AL Conductors

Category: Connector Blocks - Submersible - One Sided Wire Entry

Power Distribution Block, Large, Black, 600V, (1) 500 MCM-4 AWG (Line) - (6) 2/0-14 AWG (Load), Aluminum Body - Glass-Filled Polyester Base

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Easy-Splice H Tap Gel Splice Cover for #2 - 2/0 AWG, 1000 Volt, Black

Category: Low Voltage Gel Filled Splice Kits

Aluminum Isolated Ground Bar with 7 Circuits 2/0-14 AWG Isolated Ground Bars are made from either high-strength aluminum alloy 6061-T6 or high-conductivity copper as indicated below. The base is made from high-strength glass-filled polyester. Aluminum connectors are dual-rated for use with aluminum or copper cables.

Category: Load Center Neutral & Ground Bars

Aluminum Isolated Ground Bar with 10 Circuits 2/0-14 AWG Isolated Ground Bars are made from either high-strength aluminum alloy 6061-T6 or high-conductivity copper as indicated below. The base is made from high-strength glass-filled polyester. Aluminum connectors are dual-rated for use with aluminum or copper cables.

Category: Load Center Neutral & Ground Bars

Photocontrol, 1/2 Inch, Stem Mount, Die Cast Aluminum, 120/208-277 VAC, 2000 Watt

Category: Stem Mounted Photo Controls

NSI TGE-2/0 8 SOL - 2/0 STR T

Category: Transformer Ground Clamps

NSI NPDB-26-2/0-1 PDB 1 POLE,

Heavy Duty 1 Cable Parallel Ground Connector for 1/2-3/4in 250 MCM-2/0 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

Category: U-Bolt Ground Clamps

1 Port Aluminum Lug 2/0-14 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts, 90 degrees C. UL 486A/B Listed.

Category: 1-Conductor Aluminum Mechanical Lugs

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

Aluminum Multiple Connector 2/0-14 AWG 8 Holes Multiple connectors are made from eithercopper or aluminum bar and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper or aluminum conductors.

Category: Load Center Neutral & Ground Bars

Ratchet Drive Crimping Tool APPLICATIONS: Ratchet Drive Crimping Tool is for terminals from 6 to 1/0 AWG and insulated terminals from 22 to 8 AWG. Rugged, compact, and lightweight. Requires minimum effort due to ratchet action, ensuring an excellent crimp every time. FEATURES: TYPE: Insulated and ated ACTION: Ratchet INSULATED USE: Terminals 22 to 8 AWG USE: Terminals 6 to 1/0 AWG MANUFACTURER: NSi Industries PART NUMBER: RDC 1/0 UPC: 662381055309

Category: Hydraulic Crimping Tools & Cutting Heads

1 Hole Long Barrel Copper Compression Lug 2/0 AWG - 3/8" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Copper Compression Lugs