"wb22-8-120"

Relays. Plugin Relays. Relay 8 Pin Dpdt 12vdc.

Category: 8-Pin Ice Cube Relays

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); Optional 300 to 1000°C (572 to 1832°F), Includes: Infrared Camera, (1) 76° Lens, & (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin for Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Eaton CH thermal magnetic circuit breaker,Type CHNT non-CTL plug-on replacement circuit breaker clamshell pack,Clamshell pack,20 A,10 kAIC,Single-pole,120/240V,CHNT,#14-8 AWG Cu/Al,Q30,CHNT

Category: Residential Duplex Circuit Breakers

Milwaukee 6390-21 TILT-LOK 7-1/4" Circular Saw with Case. Voltage: 120 AC/DC. Amps: 15.0. No Load RPM: 5,800. Blade Size: 7-1/4". Arbor Size: 5/8". Max. Bevel Capacity: 50°. Capacity at 90°: 2-7/16". Capacity at 45°: 1-13/16". Blade Side: Right. Depth of Cut at 90°: 2-7/16". Depth of Cut at 45°: 1-13/16". Depth of Cut at 50°: 1-11/16". Tool Length: 13-3/4". Tool Weight: 10.4 lbs.

Category: Corded Circular Saws

2-Piece Cable Tie/Screw Mount, 8" Long, M8 Hole, 2.0" Max Bundle Dia, 50lb, PPS, Silver, 3000/ctn

Category: Screw Mount Cable Ties

LED Screw-in Downlight: LED Designer Deco series; 120V, 26W (125W equiv.), 2050LM, 80 CRI, 5000K Color, 120° Beam Angle. E26 Medium Screw Base. MOL: 3.03", DIA: 7.9". CC# 561547, 12NC 929002441203, p/n: 26UFO/PER/850/FR/P/E26/ND 4/1PF. NOTE: This item is Obsolete & No Longer Available.

Category: Reflective LED Utility Lamps

8 Ft. LED Strip, Retrofit, 64 Watt, 120-277V, Color Temperature: 4000K, 0-10 Volt Dimming

Category: LED - Retrofit Kits/Accessories

8" LED Undercabinet Light, 120V, Color: White.

Category: Undercabinet LED Lighting

Lighting Fixtures, Decorative, Ceiling, Type: Medium Base, Number Of Lamps: 1, Shade Material: Glass, Shade Finish: White, Fixture Finish: Brushed Nickel, Dimensions: 5 Height X 8 Diameter Inch, Lamp Watts: 60, Voltage: 120 Vac

Category: Ceiling Paddle Fan Downrods

Eaton E50 Heavy Duty Factory Sealed 6P+ Limit Switch,8 Ft. ( 2.5m ) Cable,10A at 240Vac,1A at 125Vdc,SOOW-A,2NO-2NC,96Foot,Die Cast Zinc,NEMA 1,3,3S,4,4X,6,6P,13,IP67,IP69K,Neon ( 120 Vac ),10A,1A,-29¦ to 221¦F (-34¦ to 105¦C)

Category: Limit Switch Bodies

Core and coil transformers for machine tool applications are used to provide voltage to control devices in applications where regulation and minimum space are important. Fully encapsulated coil is impervious to moisture-Pressure plate terminals ensure secure connections-Terminal board is anchored in the epoxy for greater reliability-Wide variety of fusing options-Rugged, high-impact plastic terminal board-Full head 8 brass screws assure quick, easy terminations with maximum connection integrity-Copper windings -Flexible design allows inp ut or ou tput volta ge to ma tch a ny app lication-CUL, CE, UL approvals-Available fuse-clips offer simple, low-cost fusing with terminal block models and minimum space are important. 58K2931

Category: 500 - 800 VA Industrial Control Transformers

Eaton BR main lug loadcenter,Ground bar, current design,Main lug,70 A,5,Aluminum,Cover not included,NEMA 1,Metallic,10 kAIC,BR,Flush,48 Circuits,Four-pole,24 Spaces,Three-wire,Single-phase,Type BR 1-inch breakers,120/240 V,#8-2 AWG Cu/Al

Category: 1-Phase Main Lug Aluminum Bus Load Centers

#8 5KV L824 BLUE

HOLOPHANE HTZL1N L96 14000LM FST MVOLT 40K 80CRI WH 8' 14000 LUMEN 120-277V FLAT FROSTED LENS 4000K COLOR

Resonating Horn, 120 Volt AC, 60Hz, 0.75 Amp, 105 Decibels at 10 Feet, Weatherproof, Indoor/Outdoor Rated, Aluminum Housing With Brass Projector and Tapped With 1/2 Inch Conduit Holes, Designed for High Ambient Noise Areas.

Category: Outdoor Horns

Emergency Battery Backup for LED Products with Internal Drivers: Input Voltage: 120-277VAC, 50/60Hz, Output Power: 8 Watts / 170VDC. Dual Flex Conduit. Dimensions: L 12.76” x W 2.13” x H 1.57”. AKA: EM-H08170-LBF

Category: LED Driver Emergency Power Supplies

SPC 100KA 120/240 SPLIT PHASE SPC 100KA 120/240 SPLIT PHASE FLTR & ALARM NEMA 4X

Deep Strut - 9/16" x 1-1/8" Elongated Holes - 2" Centers, Steel, Pre-Galvanized, Size: 1-5/8" Wide, 1-5/8" High, 10' Long, 14 Gauge

Category: Steel Strut with Elongated Holes

Abb; Terminal Block; D95/26, Feed-through; Wire Size: Rated: 95 Sq-mm, Rigid: 35- 120 Sq-mm, Flexible: 35 - 95 Sq-mm; Spacing: 26 Mm; Amperage Rating: 232 Amp;voltage Rating: 1000 V; Color: Grey; Connection: Screw Clamp; Impulse Withstandvoltage: 8 Kv; Tightening Torque: 9 - 9.5 N-m; Gauge Type: B12; Wire Strip Length: 26 Mm; Screw Driver Size: 6 Mm

Category: 25mm Feed Through & Ground Terminal Blocks

Milwaukee® 6124-31 Double Insulated Small Angle Grinder, 5 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 VAC, Black/Red, Bare Tool

Category: Corded Grinders

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 14° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 14° Lens & (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

DBT DIB1070 3/8 X 18 INSTAL