"steel staples nm"

Non-Metallic liquidtight Bullet, 3/8 inch, Straight. For use with liquidtight non-metallic Type B conduit or liquidtight non-metallic tubing, XTRAFLEX

Category: Straight Non-Metallic Liquidtight Flex Connectors

LTS10 1/2IN NM STRAIGHT FITTING LIQUIDTIGHT GREY KWIKFLEX

Category: Straight Non-Metallic Liquidtight Flex Connectors

Baying systems TS 8, material: Enclosure frame: Sheet steel, 1.5 mm, Roof: Sheet steel, 1.5 mm, Door: Sheet steel, 2.0 mm, Rear panel: Sheet steel, 1.5 mm, surface: Enclosure frame: Dipcoat-primed, Door, roof and rear panel: Dipcoat-primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure frame, Door(s), Roof plate, Rear panel, detachable, 4 eyebolts, Lock: 3 mm double-bit, description: Baying systems TS 8 with mounting plate. Protection category IP 55.

Category: NEMA 12 Floor Mount Enclosures

Cable Hook With Latch, 2 Inch Diameter, Accommodates (80) 4-Pair UTP CAT 5e or 2-Strand Fiber Optic Cable or (50) CAT6, Steel with Pre-Galvanized Finish

Category: J-Hook - Screw-On

Window Kit, Hinged, NEMA 4X, Size/Dims: 24" x 30", Stainless Steel Frame, Polycarbonate Window.

Category: Enclosure Window Kits

Machine Screw, Slotted/Phillips Round Head, Size: #8-32 x 1". Zinc Plated Steel. Package Quantity: 500. *Dottie Part # 55848.*

Category: Slotted / Phillips Combo Round Head Machine Screws

Enclosure With Lift-Off Clamp Cover, NEMA 12, 12 x 10 x 5 Inch, Steel With Gray Finish

Category: NEMA 12 Lift-Off Cover Junction Boxes

Lay-In NEMA Type 12 Hinged-Cover Wireway, Straight Section, Gasketed, Size: 2-1/2 Inch Width, 2-1/2 Inch Depth, 6 Inch Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Finish, No Knockouts.

Category: Hinged Cover Wireway

Panel For Enclosure, 14 Inch x 10 Inch, Steel, Conductive Finish, For Use With Concept Enclosures

Category: Enclosure Back Panels

1 Hole Conduit Strap, Size: 1 1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated 1-Hole Conduit Straps

Universal Cone Nut, Use with A100, B100, AB100 Series 1-5/8, 1-1/2 Inch Channel, 3/8-16 Thread, Steel

Category: Strut Channel Nuts

Sealing Locknut, 1 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

Steel, Prewired Plugmold, Tamper-Resistant, 5 Foot Length, Black. Outlets (6") O/C: Total Outlets: (12) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Wall Mount Enclosure, NEMA 3R, 4, 12 & 13, Continuous Hinge Cover With Clamps, 24 x 20 x 10 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 12 / 13 Wall Mount Enclosures

5 Inch Rigid Steel 90 Degree Sweep Elbow, 60 Inch Radius

Category: Rigid 90° Conduit Elbows

Steel, Flat Elbow, 90° for Right Angle Turns on Same Surface, Single-Channel

Category: Metallic Overfloor Raceway Elbows

Two Door, Floor-Mounted, Type 12, Enclosure, Size/Dims: 72.06" x 60.06" x 16.06", Material/Finish: Steel/Gray

Category: NEMA 12 Floor Mount Enclosures

Louver Plate Kit (3 Louvers), Size/Dims: 3.25" x 3.25", Material: Stainless Steel.

Category: Cooling Fan Exhaust Grills

Plate Straps, 1-1/2 x 18 Inch, 16 Gauge Steel, 12 Hole

Category: Safety Plate Straps

Wireway Type 1 Screw Cover, Size/Dims: 10" x 10" x 120", Material/Finish: Steel/Gray, No KOs

Category: Screw Cover Wireway

Wireway, Type 1, Hinged Cover, Lay-In, Straight Section, Size/Dims: 4.00x4.00x48.00, Material/Finish: Steel/Gray. Includes Knockouts.

Category: Hinged Cover Wireway

Enclosure With Window, NEMA 4/12, Concept Series, Hinge Cover With Quarter Turn Latch, 12 x 12 x 6 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 4 Wall Mount Enclosures

Disconnect Switch, 30 Amp, 600 Volt AC, 250 Volt DC, 3-Pole, Non-Fusible, NEMA 4/4X, Stainless Steel, Heavy Duty

Category: 3-Pole 600 Volt Non-Fused Heavy Duty Safety Switches

Conduit Hanger With Bolt, EMT: 4 Inch, Rigid: 4 Inch, Material: Steel, For Use With EMT/Rigid/IMC Conduit

Category: Conduit Clamps