Search results

Snap-In Connector, QuickPort, eXtreme Category 6, 8P8C, Channel/Component Rated, Gray.

Category: Snap-In Cat 6 Jack Inserts

Wireway, Type 1, Hinged Cover, Lay-In, Straight Section, Size/Dims: 6" x 6" x 12", Material/Finish: Steel/Gray. No Knockouts.

Category: Hinged Cover Wireway

Bus Bar, 2 x 12 x 1/4 Inch, Copper, Includes Copper Bonding Bar with Brackets and Insulators, Compression Lugs & SS Hardware, For Telecommunications Grounding Applications

Category: Bus Bars

Auxiliary Contact. Snap-on Mounting. 1 N.O. Contact. For use with OS30 - OS600, OS800-1200, OT16-100, OT200-600 and OT800-1200 Type Fusible and Non-Fusible Disconnect Switches.

Category: Disconnect Switch Auxiliary Contacts

Threaded Conduit Nipple, 1/2 Inch x 3-1/2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Conduit Body, Type LR, 3/4 Inch, Form 35, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

1 Inch Blue EMT Conduit, Steel, 10 Foot Length

Category: Straight Colored Steel EMT Conduit

C Size, 1.5V, Alkaline Batteries, Shrink Warp 6 Pack, Holds Power for Up To 10 Years in Storage, Priced per Individual Battery, Order in Multiples of 6

Category: Non-Rechargeable C Batteries

Channel Nut W/ long spring, Thread Diameter: 3/8", Material: Steel, Finish: Zinc Dichromate Gold. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts

2 AWG, USE-2/RHH/RHW-2, Compact Stranded Aluminum, Black. AA-8030 AL Series XLPE 600V.

Category: Aluminum USE Direct Burial Wire

Eaton CH Plug-On Neutral Flush Cover For 150A Or Greater MLO Loadcenter, X6

Category: Copper Bus Load Center Covers

Non-Metallic Cord Grip, Diameter: 1", Number of Holes: 9, Hole Diameters: 5mm. For use with 10 & 12 AWG USE-2.

Category: Solar Cord Grips

Narrow Slot Wire Duct, H x W x L: 3" x 1.25" x 6', Gray, 5mm Slots, Item Does Not Include Cover ***SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT***

Category: High Density Wire Duct

Steel, Bushing, 700 Series. Galvanized.

Category: Metallic Raceway End Fittings

4/3 Copper Conductors with Ground (8 AWG), 600V, Interlocked Aluminum Armor, Stranded, 100 ft. Coil. Wire Colors (120 Volt): Red, Black, White, Green. O.D.: .1.035"

Category: Aluminum Armor - Stranded Copper Conductors

Screw-In Connector, 1/2 Inch, 1/2 inch, KO, Zinc Die Cast, For Use With Flexible Metal Conduit, Refer to Diagram: A = 1.340", B = 0.710", C = 1.140"

Category: Screw-In Flex Connectors

Caseta Wireless 3-way/single-pole Rf Dimmer For Led, Cfl, Or Halogen Lights, Light Almond

Category: Wireless Dimmers & Switches

Fluorescent Lampholder, Miniature Base, T5 Bi-Pin,120W-600V, Snap-In/Slide-On, Lamp-Lock, Tall Profile, Quickwire 18AWG Solid/Str Tinned, Panel Locator Post, White

Category: Screw Mount / Snap-In Fluorescent Lampholders

2-gang 1-duplex 1-decora/gfci Device Combination Wallplate, Midway Size, Thermoplastic Nylon, Device Mount. White

Category: Midway & Oversized Combination Wallplates

Hex Washer Head Screw, 1/4 x 2-1/4 Inch, 5/16 Inch Hex, Carbon Steel, Blue, Ultracon®+

Category: Concrete Screw Anchors

30 Amp, 2-Pole, Heavy Duty Safety Switch, Non-fusible, 600 Volt AC, 600 Volt DC, NEMA 3R

Category: 2-Pole 600 Volt Non-Fused Heavy Duty Safety Switches

F20 welding material is primarily used for grounding and bonding applications. It is poured into the mold and ignited with a flint ignitor. Contains approx 115 grams of weld metal and small quantity of starting material.

Category: Traditional Welding Material

45 Amp, NEMA Size 2, Non-reversing Starter, Freedom, 600V Rated, 3-Phase Magnetic, Electronic Overload Relay, Full Load Amp Range: 9 - 45A, 120 VAC/ 60 Hz - 110 VAC/ 50 Hz Coil.

Category: NEMA Size 2 Open Motor Starters

4' MVOLT Vapor Tight LED Strip Light, 35.3 Watts, 120-277 Volt, 4298 Lumens, Color Temperature: 4000K, CRI: 80

Category: LED - Vaportight