"in wall romex splice"

IPL4-3C NSI Polaris Vision Tap (Clear) 4-14 Awg Polaris Insulated Multi-Tap Conn 3 Port (Single Sided Entry)

Category: Single Sided Entry Wire Connector Blocks

Rebar Ground Clamp, Direct Burial, Clamp Material: Bronze, Screw Material: Bronze, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Rebar Size: 3/8" - 1".

Category: Rebar Ground Clamps

Rebar Ground Clamp, Direct Burial, Clamp Material: Bronze, Screw Material: Stainless Steel, Wire Range: 8 AWG (Solid) - 4/0 AWG (Stranded) Copper Wire, Pipe Size: 1/2" - 1". Rebar: 3/8" - 1", Suitable for: Rebar, Water, Pipe, Copper Tubing and Ground Rod

Category: Rebar Ground Clamps

Winged Wire Connector, Red, Easy Twist, 18-8 AWG, Bag Of 500

Category: Color Coded Twist On Wire Connectors

1/0 - 14 Awg Polaris Vision Tap™ Insulated Multi-Tap Conn 4 Port (Single Sided Entry)

Category: Wire Splice Insulators & Covers

Easy-Splice Heavy Wall Heat Shrink 6-4/0 AWG, 48 Inch - 3 Count Made of specially formulated polyolefin irradiated and thermally stabilized to give the material "elastic memory". When a proper amount of heat is directly applied to the shrink sleeve, it will permanently shrink to its original unexpanded diameter tightly cover and "mold" itself into irregular shapes. The interior sleeve is coated with an adhesive that assures a watertight seal after shrinking. For use on standard poly- or elastomeric-insulated/ jacketed cables or lead-jacketed cables, which may include aluminum or steel armoring. RUS accepted for use as a secondary tap or splice cover. May be used for jacket repair on cables up to 35 kV. Qualified to ANSI C119.1-1986 for underground splicing. Insulate and seal buried electrical connections rated up to 1,000 volts. UL 486D Listed, CSA C22.2. Temperature Rating: 121-135 degrees C, 1,000V. CONNECTORS UP TO 6 INCHES: Recommended cut length = Connector length + 4 inches. CONNECTORS OVER 6 INCHES: Recommended cut length = Connector length + 5 inches.

Category: Heavy Wall Heat Shrink

Heavy Wall Heat Shrink, Type: Easy-Splice™, Wire Range: 8 - 2 AWG, 48 Inch Length, Expanded/Recovered: 0.170/0.550 Inch, Color: Black, Material: Polyolefin, Rated For Direct Burial & Submersible.

Category: Heavy Wall Heat Shrink

Interval Timer, 60 Minute, Ivory Twist Knob, 20 Amp, 250 Volt AC, No Hold, In-Wall Time Switch

Category: In-Wall Spring Wound Time Switches

Interval Timer, 30 Minute, Ivory Twist Knob, 20 Amp, 250 Volt AC, No Hold

Category: In-Wall Spring Wound Time Switches

Easy-Splice Wrap-Around 4/0 10"

Category: Spiral Wrap - Black

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for #6 to 1/0 AWG Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for 1/0 AWG to 250 MCM Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits

Wi-Fi Indoor In-Wall Smart Switch

Category: 15 Amp Residential Grade Decorator Switches

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for #8 to #2 AWG Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Heat Cable Splice Kits

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink

Easy-Splice Copper Direct Burial Butt Splice Kit for #14 to #8 AWG Utilizing a mechanical copper butt splice and a heavy wall heat shrink tubing to create a fully insulated splice for copper conductors only. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Vinyl Insulated Butt Connectors

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Same Side, Number of Ports: 2, Wire Range: 14 AWG - 1/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors. 6 Each per Carton

Category: Dual Sided Entry Wire Connector Blocks

Spring Wound Twist Timer, 6 Hour, 125-277 Volt, No Hold, Metal Wallplate

Category: In-Wall Spring Wound Time Switches

Timer, Spring Wound, In-Wall, 15 Minute, 7/10/20 Amp, 120-277VAC, Ivory, No Hold

Category: In-Wall Spring Wound Time Switches

Thin Wall Heat Shrink Kit Assortment: 25Pc - 125 x 6", 25Pc - 187 x 6", 20Pc - 250 x 6", 12Pc - 375 x 6", 7Pc - 500 x 6", 5Pc - 750 x 6", 600V

Category: Heat Shrink Kits

MC Cable Connector, 3/8 Inch, Cable Range: 0.50 to .61 Inch, 12/2 to 10/3, Rain Tight and Concrete Tight, Zinc Die Cast, For Use With PVC and TECK Jacketed Metal Clad Cable

Category: Single Barrel MC / AC Connectors

Interval Wall Timer, 1 Minute-18 Hour Maximum, 12-150 Watt, 24-277 Volt, SPST, White, Flash Warning Before End of Cycle

Category: In-Wall Programmable Time Switches

Interval Timer, 60 Minute, White Twist Knob, 20 Amp, 250 Volt AC, with Hold, In-Wall Time Switch

Category: In-Wall Spring Wound Time Switches

Interval Timer, 60 Minute, Ivory Twist Knob, 20 Amp, 250 Volt AC, with Hold, In-Wall Time Switch

Category: In-Wall Spring Wound Time Switches