"kg80r-qs1 kohler power systems"

NLight Power/Relay Pack, 120/277VAC, Latching Relay, 0-10VDC Dimming Output (Via Chase Nipple), Auto On (Switch Ch. 1), External Fault Protection, White

Category: Occupancy Sensor Power Packs

DIN Rail Power Supply For 1-Phase System, DC Output: 24 - 28VDC, 10 - 8.6 Amp, 240 Watt, Input: AC 100 - 240V (-15%/+10%)/DC 110V - 150V (± 20%), W: 39mm x H: 124mm x D: 117mm

Category: 1-Phase DC Power Supplies

Smart Management Module, Lockout Switch Prevents Load From Operating When System Is Operating Under Generator Power, 100 Amp/240V, Compatible With 50Hz/60Hz Power

Category: Generator Conversion Kits

WMD EAL164 HANGER CLAMP ASSBL ATTACH POLE TO ANCHOR POINT ABOVE CEILING

Category: Tele-Power Pole Mounting Kits

PP Series Power Pack, 120/277V, 16A, Dimensions: 2.33"x3.69"x1.36" (HxWxD), Fits Inside Junction Box Or Standard Fluorescent Fixture Ballast Cavity.

Category: Occupancy Sensor Power Packs

Power/Relay Pack: On/Off and dimming control of a luminaire or group of luminaires, Controls up to 80 mA of 0-10V controlled fixtures together: 0-10VDC Dimming output (via side leads), 24V Output Terminals, Support luminaires with electronic off capabilities (zero light output based on 0-10V diming level), 24VDC output to power up to 2 CMS SSA ceiling mount sensor, Supports app-less pairing. Sensor Switch # PP5 SSA D 24V, Acuity Ci Code: *2900NG

Category: Occupancy Sensor Power Packs

Standard Power Pack, 120/208/220/230/240/277V, 20A, Input: Auto ON Housing: 1/2" Threaded Nipple w/ Locknut, Latching Relay, For Use With: Occupancy Sensors, Gray

Category: Occupancy Sensor Power Packs

nLight Power/Relay Pack, 0-10VDC Dimming Output (Via Chase Nipple), UL924 Emergency Operation, External Fault Protection, Auto On (Switch Ch. 1), 120/277VAC, 3.38”H x 2.53”W x 1.83”D (86mm x 64mm x 47mm)-Does Not Include ½” Chase Nipple, Red

Category: Occupancy Sensor Power Packs

Lighting and Plug Load Flex Control Power Pack, Input: 120-277 VAC, 50/60Hz, 20A, Auto/Manual, Output: 24 VDC.

Category: Occupancy Sensor Power Packs

nLight Plug Load Control Power Pack, 120V, 2 RJ-45 Ports, Self-Powers Only, 3.38”H x 2.53”W x 1.83”D (86mm x 64mm x 47mm) - Does Not Include ½” Chase Nipple, Blue

Category: Occupancy Sensor Power Packs

NLight Relay/Power Pack, External Fault Protection, Color: White

Category: Occupancy Sensor Power Packs

Standard Power Pack, 120/208/220/230/240/277V, 20A, Input: Auto-ON, Manual-ON, and Local Switch, Housing: 1/2" Threaded Nipple w/ Locknut, Latching Relay, For Use With: Occupancy Sensors, Gray

Category: Occupancy Sensor Power Packs

Utility power return sensor with audible alert. Emits a 100dB alert when utility power has been restored.Battery powered, Mounts in standard 1/2” KO For use with any New OR Existing: Generator-ready Load Center, Manual Transfer Panel, Standby System Expansion Panel, Main Breaker Panel with Generator Linkage

Category: Generator Remote Monitors

Power Pack, 120-277 VAC Power Input, 30 VDC Control Input

Category: Occupancy Sensor Power Packs

nLight Power Supply, 120/277V, Up to 80mA at 15 VDC, Provides System Power Over CAT-5e, Extended Chase Nipple, Plenum Rated, Green LED Indicator, 3.38”H x 2.53”W x 1.83”D (86mm x 64mm x 47mm) - Does Not Include ½” Chase Nipple

Category: LED Driver Power Supplies

Phase Adaptive Dimming Power Pack: External Fault Protection; Provides phase dimming control for 2-wire dimming fluorescent, electronic low voltage, incandescent, and magnetic low voltage loads. See .pdf Catalog Page for Specifications. Model #: nPP PCD EFP

Category: Dimmer Power Packs

Solar Label, WARNING DUAL POWER SOURCE…SYSTEM, 4.125" x .75", V, Red, 50/roll

Category: Solar Installation Labels

nLight AIR Power/Relay Pack, 0-10VDC Dimming Output (Via Chase Nipple), 24V Output Terminals, UL924 Emergency Operation, via Power Sense Leads, External Fault Protection, Generation 2 Compatibility

Category: Occupancy Sensor Power Packs

Power Rated Coupler Fitting for Power to 600V, Use With LD10, LDPH10 & LD2P10 Raceway, Non-Metallic, Off-White

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Surge Breaker, Type BR, 2-Pole, 1-Phase, 120/240 VAC, Lead Length: 8 inches (203.2 mm), Includes LED Indicator for Operational Status. This one device will protect your entire downstream electrical system.

Category: Surge Breakers

LED Dimming Driver: 120-277VAC, 0-10V Dimming (*Not compatible with line (triac) dimming systems), 100W Max, The LDM-T8195-100MW enables compatible LED Hybrid and Type B lamps to dimming via 0-10 volt dimming systems with a maximum of 100 watts per module. Compatible SKUS: 87000 / 87001 / 87002 / 87100 / 87101 / 87102. Halco p/n: LDM-T8195-100MW 84979.

Category: LED Driver Power Supplies

Lighting and Plug Load Flex Control Power Pack, Input: 120-277 VAC, 50/60Hz, 20A, Auto/Manual, Output: 24 VDC.

Category: Occupancy Sensor Power Packs

20A Power Pack for Occupancy Sensors Features Include Auto ON, Manual ON, Local Switch, Photocell, Latching Relay; Line Voltage Input: 120/208/220/230/240/277V, 50/60Hz; Low Voltage:(24VDC)Input-2mA, Output-225mA. Housing: 1/2" Threaded Nipple w/Locknut (fits on or in a 4" Square Box), RoHS Compliant, Title 24 Compliant, ASHRAE 90.1 Compliant, Gray

Category: Occupancy Sensor Power Packs

DIN Rail Power Supply For 1-Phase System, DC Output: 24 - 28VDC, 5 - 4.3 Amp, 120 Watt, Input: AC 100 - 120 / 200 - 240V (± 10%), W: 39mm x H: 124mm x D: 124mm

Category: 1-Phase DC Power Supplies