"ab-6648st the austin co."

Wallplate, QuickPort, 1-Gang, 1-Port, Box Mount, Color: White.

Category: Snap-In Wallplates

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

Twine, Tracer, Poly Line, Rot/Mildew Resistance & Resists Tangling While Being Dispensed, Length: 6,500 ft, Tensile Strength: 210 lbs

Category: Spiral Wrap Poly Pull Line

The Winterized Insert will help decrease cold air leakage from the attic into the home when the QuietCool fan is not in use. The Winterized Insert is made up of a Vacuum Insulated Panel which contains an R value of 40. Combined with the QuietCool Pro Series fans, there will be an R45 barrier between the attic and living space in the off-season.

Category: Fan Winter Inserts

The MILWAUKEE® M18 FUEL™ 16 Gauge Straight Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging the nitrogen air spring mechanism, the 16 Gauge Straight Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with the POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access to tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18™ REDLITHIUM™ CP2.0 battery pack, this battery-powered nailer fires up to 700 nails per charge and is fully compatible with all M18™ REDLITHIUM™ batteries. The MILWAUKEE® M18 FUEL™ 16 Gauge Straight Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cordless.

Category: Cordless Nail Guns

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Narrow Body Single Receptacle, Straight Blade, Tamper Resistant, Commercial Grade, Grounding, Back & Side Wired, Steel Strap - White

Category: Tamper Resistant Commercial Grade Receptacles

Impact Duty Driver Bits Are Engineered To Be The Most Durable, Best Fitting Driver Bits On The Market. The Optimized Shockzone Geometry is Unique For Each Tip Type To Provide Up To 30x Longer Life And Absorbs 3x More Torque Vs. Other Impact Bits. The Precise Fit Custom Machined Tip Prevents Stripping And Reduces Wobble While The Custom Alloy76 Steel And Proprietary Heat Treat Process Maximizes Resistance To Wear And Shock. Shockwave Driver Bits Are Built To Deliver Extreme Durability For The Most Demanding Applications. Bullets:designed For Use With Milwaukee Shockwave Magnetic Bit Tip Holders; Precise Fit Custom Machined Tip Prevents Stripping And Reduces Wobble; Custom Alloy76 Steel Maximizes Resistance to Wear and Shock

Category: Square Head Insert / Power Bits

15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Duplex Receptacle/Outlet, Straight Blade, Grounding, Quickwire Push-In & Side, Standards and Certifications: UL/CSA, Warranty: 2 Year Limited, NEC compliant – Ivory

Category: Tamper Resistant Residential Grade Receptacles

M210 Portable Label Printer, Auto-Format Labels With 11 Pre-Loaded Application Design Guides For Rapid And Accurate Label Creation, Military-Grade Shock And Vibration Resistance Per MIL-STD-810G Method 5.16.6 SA4.6.5 – Drop Tested To Withstand The Roughest Job Sites, Easy-To-Access Hot Keys And Menus For Fast Label Creation, On-Board Symbols And The Ability To Store 12 Label Files Up To 2MB, Ability To Create UPC, DataMatrix, And QR Codes, Onboard Label Material Gauge Tracks The Amount Of Material Left In The Cartridge, Includes: (1) M210 Label Printer (M210), (1) M21 Series Nylon Cloth Patch Panel and Wire and Cable Labels (M21-750-499) & (1) Quick Start Guide, Powered By (6) AA Alkaline Or Optional Rechargeable Lithium-Ion Batteries (Sold Separately)

Category: Portable Label Printers

Snap-In Connector, QuickPort, GigaMax 5e, CAT 5e, 8P8C, Channel-Rated, Color: White.

Category: Snap-In Cat 5e Jack Inserts

1.0 HP @ 120V AC Switch Rating, 20 Amp 120V Feed-Through, Self Testing, Slim SmartLock PRO GFCI, Monochromatic, Blank Face, Back & Side, Self Grounding Clip Included, Buttons Match Face Color - White

Category: In-Wall - Blank GFCI

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 percent and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Category: DIN Mount Uninterruptable Power Supplies

15 Amp, 125 Volt Receptacle, 20 Amp, 125 Volt Feed-Through, Self Testing, Tamper Resistant, SmartLock Pro Slim GFCI, Monochromatic, Back & Side Wired, Nylon Wallplate & Self Grounding Clip Included - Ivory

Category: Tamper Resistant GFCI Receptacles

2-Gang, No Device Blank Wallplate, Standard Size, 430 Stainless Steel, Box Mount - Stainless Steel

Category: 2-Gang Blank Wallplates

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, With Ears Duplex Receptacle, Straight Blade, Residential Grade, Grounding, All Screws Backed Out Contractor Pack, Quickwire Push-In & Side Wired, Steel Strap - White

Category: 15 Amp Residential Grade Duplex Receptacles

2-Gang, 1-Toggle 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Toggle Switch / Decorator-GFCI Combination Wallplates

The 120 V 50/60 Hz. 1800 Watt "T" Stem Mounting The K4100 & K4400 Series Photo Controls feature stem mounting, thermal-type, controls with single and multi-voltage models. Thermal-type photo controls provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights, and lighting. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bimetal and composite resistor for reliable long life operation over ambient temperature extremes. These models are California Title 24 compliant.

Category: Stem Mounted Photo Controls

LED Retrofit w/FlexColor for Shoebox/Wallpack: 80 Watt, 10600/10700/10800 Lumens, Color Selectable Temperature: 3000K/4000K/5000K, EX39 Base. Light panel can rotate once the base is tightened to direct light out of the fixture. Enclosed fixture safe and approved for damp locations. Lamps dim to 50% by selecting “LO” on the switch located on the top of the lamp. *DLC Code: PE1R64EU.

Category: Post Top / Site / Wall Pack LED Lamps

Modbox™ Electrician's Backpack Connects To Other Modbox™ Components And Easily Unlocks With One Hand, 32 Pockets For Maximum Tool And Gear Storage And Includes A Spacious Interior For Large Hand Tools, Modbox™ Components Lock Together And Easily Unlock With One Hand, Features A Headlamp Bracket That Holds A Klein Tools Headlamp To Illuminate Either The Interior Of The Tool Bag Or The External Surroundings (Headlamp Sold Separately, Cat. Nos. 56062, 56049), Constructed With Durable Water Resistant 1680D Ballistic Weave Material, Hard, Molded Front Pocket Helps Protect Items Like Phones And Safety Glasses, Connect Cell Phone Or Other Devices Inside Backpack With Cord Pass Through, Fully Molded Bottom Protects From The Elements, Extra Padding On The Back Extends Over The Hard Bottom For Carrying Comfort, Main Zipper Designed With Lockable Zipper Pulls (Lock Not Included), Tape Loop Fits All Standard Electrical Tape Rolls

Category: Backpacks

Hex Driver Sizes Include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Impact-Rated Sockets For The Toughest Driving Applications, Flip Sockets Enable Quick Access And Convenience To Common Sizes, Color Coded Hex Sizes For Easy Identification, Store Sockets In Any Order And Orientation On The Shaft, Bit Holding Design Allows The 1/4-Inch Socket Size To Drive Hex Fasteners And Hold Screwdriver Bits, Flip Socket Set Can Quickly Attach To An Impact Driver Or Our 1/4-Inch Quick-Connect Driver Handles For Any Situation, Handle Not Included

Category: Sockets & Socket Sets

MODbox™ Components Easily Interconnect for a Customized Mobile Workstation, Easily Attach and Move the Tool Carrier Onto Any System Side Rail With One-Handed Release, Keep Fasteners And Connectors Easily Accessible At The Jobsite, Clear Lid, Perfect For Small Items Such As Wire Connectors, Fasteners, Anchors, And More To Keep Your Workspace Organized, Secure The Parts Bin Inside The Rolling Toolbox And Medium Toolbox With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately

Category: Components Kits

Quad-8 Deep Well Heavy-Duty Impact Flip Sockets Contain 8 Hex Sizes Combined Into 2 Color-Coded Sockets, Spring-Loaded Action Allows For Hands-Free Access To Either Hex Size By Simply Applying Pressure To The Smaller Socket To Compress It Out Of The Way, Heavy-Duty Impact Sockets Are Made Of Heat Treated Cold Forged Steel For Long-Lasting, High Torque Applications, Industry-Standard Color-Coded Painted Rings To Quickly Identify Hex Sizes, Deep Well Sockets Are Ideal For Managing Extended Threads, Recessed Bolts, And Confined Spaces, Offering Exceptional Reach And A Reliable Grip, Store The Small (1/4 To 7/16-Inch) And Medium (1/2 To 11/16-Inch) Quad-Sockets On The Long 1/4-Inch Shaft To Efficiently Swap Between Any Combination Of 8 Hex Sizes For Speed On The Job

Category: Sockets & Socket Sets

Through-The-Wall Fan, CFM: 200, Sones: 7.5, Duct Size: 8", Color: White, Includes: Built-In Damper

Category: Through-The-Wall Fans

1-Gang, (1) 1.600 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: 302 Stainless Steel, Device Mount, Locking - Color/Finish: Stainless Steel.

Category: 1-Gang Single Receptacle Wallplates