"gs-8"

STL 52171-1234RD 2-1/8 INDEEP

Category: 4" Square Metallic Fire Alarm Boxes

EZS CL1508-1 CABLELOC 8

Category: Solar Mounting Hardware

4" Square, Nail-On, Switch/Outlet Box with "N" Bracket, Phenolic, Depth: 2-3/8". Cubic Inches: 30", Includes: Clamps, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Non-Metallic New Work Switch / Outlet Boxes

7/8" Length, 6-32 Thread, White, 50-Pack, Oval Head, Milled Slot Type, Replacement Wall Plate Screws.

Category: Wallplate Screws

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Black, Shrink Ratio: 2:1, Size: 3/8 Inch, Expanded Insulation Diameter: .375 Inch, Recovered Insulation Diameter: .187 Inch, Tube Length: 6 Inch Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Liquidtight Connector, Straight, 3/8 Inch, Non-Insulated, Aluminum, For Use With Liquidtight Flexible Metal Conduit

Category: Straight Aluminum Liquidtight Flex Connectors

Non-Metallic Sheathed Cable Connector, Two Screw Clamp Type, Diameter 3/8 Inch, Cable Range 0.180 - 0.640 Inch, Zinc Die Cast

Category: Zinc Die Cast NM Cable Connectors

SDS Plus Rotary Hammer Kit, Solid Bit Capacity: 5/8", Length: 10-9/10", Amps: 5.5, Vaoltage: 120, Cord Length: 10', Weight: 4.6lbs.

Category: Corded SDS Rotary Hammers

MC/AC/Flex Connector, 2 Screw Clamp Type, 90 Degree, 3/8 Inch, Steel With Zinc Finish

Category: 90 Degree Two Screw Squeeze Flex Connectors

Milwaukee; Hole Saw; Ice Hardened; Hole Diameter: 3-3/8 In; Rpm Mild Steel: 100rpm; Rpm Stainless Steel: 50 Rpm; Rpm Cast Iron: 65 Rpm; Rpm Aluminum: 150 Rpm

Category: Bi-Metal Hole Saws

4 Inch Square Box, Welded, Metallic, B Bracket, Armored Cable Clamps, Metal Clad Cable Clamps, Flex Clamps, Depth: 2-1/8 Inch, Side Knockouts: (2) 1/2 Inch (1) TKO, Bottom Knockouts: (1) 1/2 Inch, Cubic Inches : 30.3

Category: 4" Square Metallic Boxes With Brackets

4 in. Square Box, Welded with (2) STAB-IT® Connectors on Top, 2-1/8 in. Deep, 600V, 8 in. #12 Solid Copper Pigtail, UBS, M Bracket

Category: 4" Square Metallic Boxes With Brackets

MC/AC Cable Connector, Snap-In, 3/8 Inch, Diameter 0.395 - 0.638 Inch, Insulated, Zinc Die Cast

Category: Single Barrel MC / AC Connectors

Strain-Relief Grip, Single/Double Weave, Straight, Male, Aluminum Body, Stainless Steel Grip, NPT Diameter: 3/8 Inch, Cable Diameter Range: .250 Inch - .312 Inch.

Category: Single / Double Weave Strain-Relief Grips

4" Square Box, Welded, Metallic, 2-1/8 Inch Deep, Cubic Inches: 30.3, Side Knockouts: (2) 1/2 Inch and (1) 1/2 and 3/4 Inch Eccentric, Bottom Knockouts: (1) 1/2 Inch, End: (2) Cable Knockouts, Steel, For Use With Armored/Metal Clad Cable

Category: 4" Square Metallic Boxes

Hammer-Drill Bit, 2-Cutter, Length: 16", Diameter: 5/8", Shank: Spline.

Category: Spline Masonry Bits

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Extra Heavy Duty Hospital Grade, Duplex Receptacle, Tamper-Resistant, Straight Blade, Self Grounding, Back & Side Wired, 8 Hole Feed-Thru - Gray

Category: Tamper Resistant Hospital Grade Receptacles

nVent ERICO copper bonded rods combine the strength of steel for ease of installation with molecularly bonded copper for long lasting corrosion resistance. Cu Bonded Ground Rod, Pointed, 5/8" ?

Category: Copper Ground Rods

Replacement Cutting Die Set 1/4", 3/8", 1/2"

Category: Knockout Punch Kits

Mss24 1/8-1/4 Strap Hgr clamp

Category: Conduit Hangers From Wire/Rod & Beam

Hex Nut, 3/8 Inch, Stainless Steel

Category: Stainless Steel Hex Nuts

Hammer On Beam Clamp, 1/8" - 1/4"

Category: Datacomm Loop Clamps

Heat Shrink, Multi-Wall Adhesive-Lined, Tubing MW 1/8 Inch Black 6 Inch Piece, 10 Each Per Pack, 10 Packs/Case

Category: Adhesive Lined Heat Shrink

Ring Terminal, Non-Insulated, 14 - 10 AWG, #8 Stud Size, 500 Pack

Category: Non-Insulated Ring Tongues