"twhs-750-48 industries, llc"

.750.375 Thin Wall Heat Shrink, 6 Inch Length, 600 Volt, Round, Polyolefin, Pack Of 6

Category: Thin Wall Heat Shrink

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 3, Wire Range: 750 - 250 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Offset Pin Terminal, Aluminum, Tin Plated, Yellow Color Coded, 750 MCM,1 Conductor, Plastisol Cover, 600V

Category: Aluminum Pigtail Adapters

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 12, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

1 HoleStandard BarrelAluminum Compression Lug750MCM -1/2 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Aluminum Compression Lugs

Multi-Tap Connector, 2 Sided Entry, 1/0 AWG - 750 MCM, Aluminum With UV Rated Plastisol Insulation, Black, Rated For USe With CU/AL Conductors

Category: Dual Sided Entry Wire Connector Blocks

12-Ton Hydraulic Crimping Tool 750 MCM - 8 AWG APPLICATIONS: Accepts KC12, KA12 and KD12 crimping dies as well as industry "U" style dies. New head design results in lower weight and improved durability- tested to 50,000 crimp cycles. Two-speed pump to reduce cycle time. Ram automatically retracts when crimp cycle is complete. Crimping heads rotate 350 degrees. Smaller and lighter than most competitive tools. Includes carrying case. 8 AWG to 750 kcmil copper and aluminum color-coded lugs and splices. UL and cUL Listed.

Category: Datacom Compression Tools

NSI KA12-750 U-TYPE DIE 750 M

Category: Wire Crimping Dies, Adapters, & Blades

4 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Heat Shrink End Cap, 750 MCM - 1500 MCM, Round, Polyolefin

Category: Heat Shrink End Caps

Stranded Bi-Metallic Pin Terminal 750 MCM Stranded Bi-Metallic Pin Terminals is designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.

Category: Aluminum Pigtail Adapters

NSI IT-750C 750-250 MCM POLAR

Category: Dual Sided Entry Wire Connector Blocks

NSI NPDB-14-750-1 PDB 1 POLE,

750 - 250 MCM Polaris Vision Tap™ Insulated Multi-Tap Conn 3 Port (Dual Sided Entry)

Category: Dual Sided Entry Wire Connector Blocks

2HoleStandard BarrelAluminum Compression Lug 750 MCM -1/2 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 2-Hole Aluminum Compression Lugs

NSI HWHS20-750-9 2/0 AWG - 75

Category: Heavy Wall Heat Shrink

NSI SL750N 750 MCM CU STACKED

Category: 2-Hole Copper Compression Lugs

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 4, Wire Range: 750 MCM - 1/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Copper Compression Lug, Conductor Size: 750 MCM, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

Nsi Asc750t #750 Alum Compres sion Splice

Category: Standard Barrel Aluminum Compression Sleeves

Polaris™ Insulated Multi-Tap Connector, 6 Port (Dual Sided Entry), 750 - 250 MCM, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

NSI HWHS20-750-6 2/0 AWG - 75

Category: Heavy Wall Heat Shrink

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 5, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

NSI HWHS20-750-12 2/0 AWG - 7

Category: Heavy Wall Heat Shrink