"cf32dt/e/in/835"

MC Neutral Per Phase, 10/3 Solid (Black/Red/Blue) 10/3 Slid (White-Black/White0Red) Copper, Aluminum Flex, 1000 Feet, 120/208 volts. Addresses harmonics distortions in power distribution systems and meets the requirements of NEC® 210.4(B) Disconnecting Means. Eliminates shared neutrals, and allows electrical systems to continue to operate.

Category: Aluminum Armor - Neutral per Phase

1/2" Punch CutterPunch Cutter, Diameter: 1/2".

Category: Knockout Punches

1/2" to 2" IMC Single Shoe Group, For Use With Maxis MXB2000 Xtreme™ Bender (Sold Separately)

Category: Conduit Bender Shoe Kits

1/2" TO 2" Rigid Single Shoe Group, For Use With Maxis MXB2000 Xtreme™ Bender (Sold Separately)

Category: Conduit Bender Shoe Kits

SIMPush Conduit Body, Type: LR, Size: 3/4", Material: Copper Free Aluminum

Category: Type LR Aluminum Conduit Bodies

3" Clamp Tie, 360° Rotating Handle, Brown, 25/PK

Category: Releasable Cable Ties

2" Clamp Tie, 360° Rotating Handle, Brown, 25/PK

Category: Releasable Cable Ties

4 Inch Square Cover, Offset Device Ring, Raised 1 Inch, Drawn, Metallic

Category: 4" Square Metallic Box Mud Rings

SIMpull 12/3 THHN/THWN-2 Stranded Copper, 600 Volts, Thermoplastic Insulation/Nylon Sheath, Heat, Moisture, Gasoline and Oil Resistant II, Rated Both THHN/THWN-2 and THWN-2, Also Rated MTW And AWM, SIMpull® Technology For Easier Pulling, Black/White/Green, 350 Ft. CoilPak, Order in Multiples of 350

Category: 12 AWG Stranded Copper THHN

4"SQ.OPEN COVER FOR OCT BOX

Category: Octagon Metallic Box Covers

1/2" thru 2" Rigid/IMC Bending Shoe, For Use With Maxis MXB2000 Xtreme™ Bender (Sold Separately)

Category: Conduit Bender Shoe Kits

3/4 Inch Liquidtight Steel Flex, UL Listed, Type UA, Steel Core, PVC Jacket, Gray, 1000 Foot Reel, Integral Bonding Strip

Category: Liquidtight Flexible Metallic Conduit

Hand Cable Bender, 14 Inch Height, 500 MCM

Category: Mechanical Conduit Bending Tables

Data / Voice Cable - Type CMR - Riser, Category 5e, 24 AWG - 4 Pair, Copper, Solid, Orange, 1000' Pull Out Box, PVC Jacket, ETL Listed Type CMR, C(ETL) Listed CMR FT4, ETL Verified to TIA/EIA 568-C.2

Category: Category 5e Non-Plenum Cable

1IN RIGID RAINTIGHT COUPLING- MAL IRON-5/50PK

Category: Rigid Compression Couplings - Iron

SOUTHWIRE 14/4 EZ-IN MINI SPLIT STRANED PVC INSULATION & NYLON JACKET

Southwire Armorlite Type MC Cable is constructed with soft-drawn copper Type THHN/THWN-2 conductors rated 90°C dry and a bare copper grounding conductor for sizes 1/0 AWG and larger. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. Also available in steel. Conductors are black with phase identification. Colors available upon request with economic order quantity.

3" 90? Squeeze Type BX-Flex Connector

Southwire Armorlite Type MC Cable is constructed with soft-drawn copper Type THHN/THWN-2 conductors rated 90°C dry and a bare copper grounding conductor for sizes 1/0 AWG and larger. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. Also available in steel. Conductors are black with phase identification. Colors available upon request with economic order quantity.

5" 3 Piece Rigid Malleable Iron Couplings

Titan2 Type UL LFMC is manufactured with a spiral wound strip of heavy gauge corrosion-resistant hot-dipped galvanized steel. For 3/8" through 1-1/4" trade sizes the core is constructed with a square locked steel strip with an integral copperbonding strip enclosed within the steel convolutions. For 1-1/2" through 4" trade sizes the core is constructed with a fully interlocked steel strip. A rugged flame retardant flexible PVC jacket is extruded over the steel core. The grey jacket resists oils mild acids and exposure to sunlight. Also available in other colors subject to minimum runs.

Southwire Armorlite Type MC Cable is constructed with soft-drawn copper Type THHN/THWN-2 conductors rated 90°C dry and a bare copper grounding conductor for sizes 1/0 AWG and larger. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. Also available in steel. Conductors are black with phase identification. Colors available upon request with economic order quantity.

SIMPush Metallic Liquidtight 90 Connector, Size: 1"

Category: 90 Degree PVC Coated Type LT Connectors