"ab-24246gsb the austin co."

Conical Anchor Kit, Plastic, Light Duty, #10 x 1 Inch, QTY 100

Category: Sheet Metal Screw Anchor Kits

10 Amp, Power Supply. SDN-C Series. 1-Phase. Rated Input Volts: 85 - 264V AC & 90 - 375V DC. Rated Output Volts: 23.5 - 28.5V DC. Rated Output Current: 10 Amps. H x W x D: 4.88" x 1.97" x 4.55".

Category: 1-Phase DC Power Supplies

Power Line Conditioner with Voltage Regulation, 1-Phase, MCR Hardwired Series, 60 Hz. VA: 1000. Voltage Inputs: 120, 208, 240, 480. Voltage Output: 120, 208, 240. HxWxD: 17"x9"x7".

Category: Power Conditioning

Includes 72” inner telescoping tube to extend the RBJ20K open to a 90” opening between upright carriages (Max spool width 88”) Set of (2) Axle Collars 10’ Solid axle 3” OD with an eye bolt for pulling the axle through the large spool 357 lb. – 20,000 lb. rated

Category: Fish Rods

LED HID Fixture Retrofit Kit. Wattage: 320w, Voltage: 277-480V (can be used on 347V), Lumens: 44610, Color Temperature: 5000K, CRI: >70, EX39 Base. Replaces up to 1000W HID. LED panel is adhered on lens within fixture (Lens must be flat and made of glass), Enclosed fixture required. “D” Models dim to 50% by selecting “LO” on the switch located on the top of the lamp.

Category: Post Top / Site / Wall Pack LED Lamps

Punch Kit, Slug Buster Knockout, Diameter: 089", 170", 136", 115" & 112, Conduit Size: 1/2", 3/4", 1" & 1-1/4"

Category: Knockout Kits - Manual

Socket Extension Adapter, 1-3/16", Medium-Medium Base, 660W-250V, One-Piece, Incandescent Phenolic Lampholder, Black **FOR PHENOLIC SOCKETS ONLY**

Category: Lampholder Adapters & Extensions

15 Amp, 125 Volt, NEMA 5-15P, 2P, 3W, Plug, Straight Blade, Residential Grade, Grounding - Black.

Category: 15 Amp Straight Blade Plugs

SDU AC-B Series DIN Rail UPS, 500VA, 300W, 120 VAC, 50/60 Hz

Category: AC Power Supplies

LED HID Fixture Retrofit Kit. Wattage: 320w, Voltage: 120-277V (can be used on 208V & 240V), Lumens: 44610, Color Temperature: 5000K, CRI: >70, EX39 Base. Replaces up to 1000W HID. LED panel is adhered on lens within fixture (Lens must be flat and made of glass), Enclosed fixture required. “D” Models dim to 50% by selecting “LO” on the switch located on the top of the lamp.

Category: Post Top / Site / Wall Pack LED Lamps

Hole Saw Kit, Diameters: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 3", 3-5/8", 4-1/8", 4-1/2", Conduit Sizes: 1/2" - 4"

Category: Hole Saw Kits

D'Versibit, Quick Change, Starter Kit

Category: Flexible Steel Drill Bits

Toggle Switch, Bat Handle Type, SPST, Maintained Contact, Circuit Functions: On Off, 8 Amp @ 125V AC, 4 Amp @ 250V AC. Metallic Toggle, 6" Wire Lead Terminals. Mounting: Bushing, 15/32".

Category: 1-Pole Toggle Switches

Smoke & CO Alarm, Hardwired, with 10-Year Battery Backup & Voice Alert

Category: Combination Smoke & Carbon Monoxide Detectors

Slim-Tip Insulated Screwdriver, 3/16-Inch Cabinet, 6-Inch Round Shank, 6-Inch Round Shank, 3/16-Inch Cabinet Tip, Insulated Screwdriver With A Slim Tip That Allows For Greater Access Into Tight Spaces, Layer Of Orange Impact & Flame-Resistant Insulation Protects From Energized Sources, Insulated Blade Is Flush With The Tip To Help Reduce Nicking The Insulation, Tip-Ident® Quickly Identifies The Tip Type & Orientation

Category: Slotted Cabinet Tip Screwdrivers

LED UL Type-B (Ballast Bypass) Lamp, 35W, 120-277V (Also works on 208 & 240V), Bulb: LED for HID Retrofit for Post Top / Area, Base: Medium Screw (E26), Lumens: 5360, CRI: 80+, Color Temperature: 5000K, Rated Average Life: Up to L70/50,000 Hrs. Up to 175W HID Equivalent. 8033D models dim to 50% by selecting “LO” on the switch located on the side of the lamp. *** NOTE: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. ***

Category: Post Top / Site / Wall Pack LED Lamps

2.5 Amp, Power Supply. SDN Series. 1-Phase. Rated Input Voltage: 85 - 132 / 176 - 264V AC & 90 - 375V DC. Rated Output Voltage: 24V DC. Rated Output Current: 2.5 Amps. H x W x D: 4.88" x 1.97" x 4.55". NEC Class 2 / DeviceNet.

Category: 1-Phase DC Power Supplies

Sub-Feed Breaker Mounting Panel Kit. Designed to be used at the bottom or thru-feed end. Takes the place of the two solid covers on bottom end. For use with 1 or 3-Phase Type PRL1A or PRL2A interiors

Category: Panelboard Main Breaker Kits

Rubber Boot with Nut for Toggle Switches, 15/32" Thread.

Category: Toggle Switch Covers

Spade Bit, Self Feeding, Diameter: 5/8", Hex Shank 1/4"

Category: Spade Bits

6 KVA, 3-Phase, 480 Delta Primary Volts - 240 Delta/120 Secondary Volts, NEMA 3R, Wall Mount, Shielded Automation Transformer, Encapsulated, 60 Hz. HxWxD: 13.00" x 15.50" x 8.60".

Category: 6 KVA Dry Type Transformers

Incandescent Lampholder, Medium Base, One-piece, Outlet Box Mount Lampholder, Pullchain, Single Circuit, Top Wired, White

Category: Pull Chain Incandescent & HID Lampholders

Accepts commercially available 1-gang flush plates (not furnished). NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Finish - Gray

Category: 1-Gang Raceway Box Covers & Faceplates

The Cr-U2S Socket Is From The Cr-U (Universal) Relay Range. The Socket Is Suitable For Cr-U Relays With 2 C/O (Spdt) Output Contacts

Category: 8-Pin Mounting Sockets