Search results

Flex Connector, Straight, 1 Inch Diameter, 316 Stainless Steel, For Use in Damp and Corrosive Environments, Compatible With Flexible Conduit and PVC Coated Flexible Conduit

Category: Screw-In Flex Connectors

Wall-Mount, Type 4X, Enclosure, Hinged Cover, Size/Dims: 24.00x24.00x12.00, Material/Finish: SS Type 304.

Category: Stainless Steel Wall Mount Enclosures

Wedge Anchor Full Thread. Anchor Hole DIA: 3/8"-16. Overall Length: 2-1/4". Thread Length: 1-1/8". Stainless Steel. Box Quantity: 50 *Dottie Part # 70320.*

Category: Hammer-In Wedge Anchors

30.5 mm, Heavy-Duty, Watertight-Oiltight, Pilot Device Enclosure, Stainless Steel Type 304, Surface Mount, 2 Element, 1 Contact Block Depth, NEMA 4, 4X, 12.

Category: Stainless Steel Pilot Device Enclosures

Floor Stand Kit (Quantity 2), Bulletin A4SY, Size: 12" x 12", Material: Stainless Steel 304

Category: Enclosure Floor Stands

Sheet Metal Screw, Pan Head, Square Drive, Stainless, #8 x 1-1/2 Inch

Category: Square Drive Pan Head Stainless Steel Sheet Metal Screws

Conduit Hub, Size: 2 Inch, Threaded, Material: Stainless Steel, Calbrite Stainless Steel Hubs Are Fabricated to UL514B and ASTM A351 Standards.

Category: Stainless Steel Conduit Hubs

1/2 Inch Stainless Steel - Corrosion Resistant Cord Grip. Straight; Cable Range .438-.500

Category: Straight Stainless Steel Cord Grips

Reflex™ Super T®-Stripper Wire Stripper, 6/32 And 8/32 Self-Chasing Screw-Cutting Holes, Ergonomic Design, Textured Sleeves With Extra Cushioning For Added Comfort, Stainless Steel

Category: Wire Strippers

Flush Pin Shackle, Stainless Steel

Category: Utility Pole Anchor Shackles

Wide Range Cord Grip, Dust Tight Strain Relief, Straight Male, Insulated, Galvanized Steel Grip, Thread Size: 1-1/4 Inch NPT, Cable Diameter: 0.940 Inch - 1.250 Inch.

Category: Single Weave Strain-Relief Grips

Post base, 4-Hole Bottom Plate, Bolt Hole Diameter 9/16 in, Material: Stainless Steel, Use with PS 200, 210.

Category: Post Base Strut Channel Connectors

GripCap Plus for FlashVue, Stainless Steel, Black

Category: Solar Rail Covers

Machine Screw, Pan Head Phillips, Stainless Steel, #6-32 x 2 Inch

Category: Slotted Round Head Machine Screws

Enclosure, NEMA 4X, Hinge Cover, 16 Inch x 16 Inch x 8 Inch, Stainless Steel

Category: Stainless Steel Wall Mount Enclosures

Hex Head Cap Screw. Size: 1/2" x 2". Hex Size: 3/4". 18-8 Stainless Steel. Partial Thread. Package Quantity: 50. *Dottie Part # 69852.*

Category: Hex Head Bolts

Threaded Conduit Nipple, 1 Inch x Close, Stainless Steel

Category: Stainless Steel Conduit Nipples

Conduit Body, Type: LB, FM8, Size: 1", Material: Stainless Steel. Includes: Cover & Gasket.

Category: Type LB Stainless Steel Conduit Bodies

Sheet Metal Screw, Pan Head, Square Drive, Stainless, #8 x 2 Inch

Category: Square Drive Pan Head Stainless Steel Sheet Metal Screws

Square Washer, Size: 1/4 in, Material: Stainless Steel.

Category: Strut Channel Washers

Blanking Top Plate. Diameter: 3-1/2". Stainless Steel. For use with: 2" IPS.

Category: Round Recessed Box Covers

Hole Seal, for 1.25" Conduit. Size/Dims: 2.19", Material/Finish: SS Type 304.

Category: Stainless Steel Enclosure Hole Seals

Machine Screw Hex Nut. Size: #10-32. Stainless Steel. Package Quantity: 100. *Dottie Part # 69872.*

Category: Stainless Steel Hex Nuts

Vent Drain, 2 x 1.38 Inch, Material/Finish Polyester/Stainless Steel, For Use With Thermoelectric Dehumidifier.

Category: Enclosure Corrosion Inhibitors