LED Driver Emergency Power Supplies

Emergency LED Driver, Class 2, Listed for field or factory installation, Extreme Cold Environments, 14.0 Watts initial output power, Listed for field or factory installation - UL 924 Emergency Lighting Compliant. Compatible with AC drivers and LED loads rated for Class 2.

Category: LED Driver Emergency Power Supplies

Emergency LED Driver, Cold-Pak for Extreme Temps: Temperature Rating (Ambiant) -20°C to +60°C (-4°F to 140°F); Input Voltage: 120-277 VAC, 50/60Hz., Output Voltage: 28.0 to 33.0 VDC. Operates an LED Load of Up to 23.1W, 700mA at Nominal Battery Voltage for a Minimum of 90 Minutes. UL Recognized Factory Installation (Indoor and Damp locations including Sealed and Gasketed fixtures)

Category: LED Driver Emergency Power Supplies

Low-Profile LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED load of up to 10W at nominal battery voltage for a minimum of 90 minutes. Automatic adjustment for LED load configurations within the voltage range of 15 - 52V. UL Listed for factory or field installation. Class 2 Output. (galvanized metal case)

Category: LED Driver Emergency Power Supplies

21W Emergency LED Inverter: Input; 100-277V AC, 50/60Hz, 120mA Max, 8W Max, Output; 21W Max, 150-200Vdc. Green Creative Product # 37935, Model # 21EMINVERTER.

Category: LED Driver Emergency Power Supplies

LIT ETS20 HITEMP M20

Category: LED Driver Emergency Power Supplies

Power Sentry Emergency Constant Power Battery Pack Field Installation Kit (T20 Cec Compliant)

Category: LED Driver Emergency Power Supplies

LED Emergency Driver: Class 2, 120-277VAC; 50-60Hz, 10W Constant power output over 90 minutes. Class 2 emergency drivers are compatible with any LED array that operates at a voltage of 10VDC to 55VDC. This includes most Strips, Linear, Commercial Lay-ins, and Downlighting luminaires from any luminaire manufacturer. CA Title 20 compliant.

Category: LED Driver Emergency Power Supplies

Emergency LED Driver: Hi-temp rechargeable Lithium–Ion; 120-277VAC Input, 5W Output Power. Suitable for use with select GREEN CREATIVE single ended bypass (BYP) or double end bypass (DEB) lamps only. See complete list on .pdf Catalog Page 2 in “COMPATIBLE LAMP MODELS” table.

Category: LED Driver Emergency Power Supplies

IOTA Constant Power Emergency LED Driver: 120-277VAC, 50/60Hz, Output: 10-55VDC Class 2 Compliant, 0.7A (@10VDC) - 0.13A (@55VDC), 7 Watts (constant), 1.4A. Operating Temp: 0° to 55° C, Self-Diagnostic / Self-Testing, Stainless Steel Switch. Acuity/IOTA CI Code: *286LFN

Category: LED Driver Emergency Power Supplies

8W Emergency LED Inverter, 100-277V, 90-Minute Emergency Runtime

Category: LED Driver Emergency Power Supplies

APP APMS050C135UD13 MLLED4 50

Category: LED Driver Emergency Power Supplies

APP APMS150C105UD68 LED DRIVE

Category: LED Driver Emergency Power Supplies

Blink - Battery Backup Module For Flush Mount LED Fixture - 9" Square - White Finish

Category: LED Driver Emergency Power Supplies

FULHAM FHSCPUNV17WL EMERGENCYDRIVER FOR LED 17W OUTPUT POWER 2700 OUTPUT LUMENS 340-850 OUTPUT CURRENT MA 19.2L X 2.6W X 1.5H

Category: LED Driver Emergency Power Supplies

25W Micro-Inverter / Emergency Power Supply: Works with any fixture =150W for 25W of Constant Emergency Power for 90 minutes. UL listed and CEC Title 20 compliant. Dims luminaires of up to 150W down to 25W(45VA) in emergency with 0-10V dimming; 25W(45VA) max without 0-10V dimming. Fulham FHUPS1-UNV-25L-SD.

Category: LED Driver Emergency Power Supplies

LED Emergency Battery B/U with LED source: Watts: 6, Lumens: 1200, 90 minute run time. Small-H Module. 3.54” x 3.93”.

Category: LED Driver Emergency Power Supplies

1350 LUMEN LINEAR HOTSPOT1

Category: LED Driver Emergency Power Supplies

Emergency LED DriverBODINE BSL310LP FIELD INSTALLED EMB

Category: LED Driver Emergency Power Supplies

Emergency LED Driver Listed for Field Installation, Universal Input Voltage 120-277 Volt AC, 20 Watts Output Power

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time

Category: LED Driver Emergency Power Supplies

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with Conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. Philips PTB015B2UK45C1PDI1. 12NC 913702489501 / PEL00033P. *AKA: Bodine p/n BTB015B2UK45C1PDI1, 12NC 913702489301 / UPC #663015112283.

Category: LED Driver Emergency Power Supplies

BOD BSL20 HV Emergency LED Driver, 0.16A-0.10A, 125V-200V

Category: LED Driver Emergency Power Supplies

Electronic Ballast, Compact Fluorescent, Instant Start, 1-Lamp, Lamp Wattage: 28, 277 Volt

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 7.5W (30- 130VDC) for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 Field or factory installation (Indoor/Damp).

Category: LED Driver Emergency Power Supplies