Search results

Emergency LED DriverBODINE BSL310LP FIELD INSTALLED EMB

Category: LED Driver Emergency Power Supplies

Emergency LED Driver Listed for Field Installation, Universal Input Voltage 120-277 Volt AC, 20 Watts Output Power

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time

Category: LED Driver Emergency Power Supplies

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with Conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. Philips PTB015B2UK45C1PDI1. 12NC 913702489501 / PEL00033P. *AKA: Bodine p/n BTB015B2UK45C1PDI1, 12NC 913702489301 / UPC #663015112283.

Category: LED Driver Emergency Power Supplies

BOD BSL20 HV Emergency LED Driver, 0.16A-0.10A, 125V-200V

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 7.5W (30- 130VDC) for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 Field or factory installation (Indoor/Damp).

Category: LED Driver Emergency Power Supplies

LED Emergency Driver. Input Voltage: 120/277 Volts AC, 60Hz. Output Voltage: 120/277 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 400 VA. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

Emergency LED Driver, 20 Watt Constant Output Power, 1A-0.40A 20V-50V (Class 2)

Category: LED Driver Emergency Power Supplies

LED Emergency Driver (Flat Battery Option) - Input Voltage: 120-277V AC. Operates an LED Load of Up to 23.1 W at Nominal Battery Voltage for a Minimum of 90 Minutes. UL Recognized Factory Installation (Indoor and Damp) Output Class 2 Compliant. ### FOR REPLACEMENT USE ONLY ###

Category: LED Driver Emergency Power Supplies

EMERGENCY LED DRIVER

Category: Screw Base Miniature Incandescent Lamps

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with no conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H, 12NC 913702489401 / PEL00032P. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. *Philips 12NC 913702489401- PTB015B2UK45L1PDI1.

Category: LED Driver Emergency Power Supplies

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277 Volt, 1000-3500 Lumens Initial Light Output, 32-215 Watt

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 600-1325 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-40W, 2-4 ft T5, T8, T10, T12, 4-Pin (2G11) or (1) Philips InstantFit LED T8 4' lamp ***Discontinued, See Sub***

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 600-1325 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 14-54W T5/HO 2-4 ft, (1) 14-28W T5 2-4 ft, (1) 44W T8/HO 4 ft, (1) 44-55W T8/HO 4-5 ft, (1) 17-40W T8 2-5 ft, (1) 36-55W Long Compact 4-Pin or (1) Philips InstantFit LED 4' T8 Lamp.

Category: Emergency Fluorescent Ballasts

The REDiTEST B30ST emergency ballast works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one red case. The B30ST can be used with most 17 - 215 W (2’ - 8’) T5, T8, T9, T10 or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline and energy-saving, and (4-pin) twin, quad and triple twin-tube compacts. One- or two-lamp operation may be selected (see Table 1). It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts.

Category: Emergency Fluorescent Ballasts

(2) Wire Bundle Covers. For use with Emergency Ballast. ***May be required by State Law***

Category: Emergency Fluorescent Ballast Mounting Covers

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. The B94CU can be used with one 13 - 42 W (4-pin) twin, quad or triple twin-tube compact. It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. Lumens: 300-750

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger; 17-250W, Input Voltage: 120/277V;90 Minute Illumination Time;24 Hr Recharge. Lumens: 300-750;Hazardous Location

Category: Emergency Fluorescent Ballasts