Search results

0.63 to 1 amps MS 325 manual motor protector that has been replaced by the MS132-1.0 manual motor protector

Category: Manual Rotary Motor Controllers

3-Phase Supply Voltage, 200 - 240V AC, IP66, NEMA 4X Drive. 3-Phase Output, 0.5 Hp. Includes: Advanced Control Panel. Frame Size: R1. H: 12.01" W: 7.68" D: 11.06". ***NEMA 4X Rated for Indoor use Only***

Category: 240 Volt AC Operated NEMA 4X General Machinery Variable Frequency Drives

Connection: Power Cage Clamp, Side Entry Wiring, DIN-35 Rail Mount

Category: 35mm Feed Through & Ground Terminal Blocks

Digital Output Module, 16 Channel, 24 Volt DC, 0.5 Amp

Category: Intelligent Relay Expansion Modules

MS Series Toggle Operated Manual Motor Starter in a NEMA 1 Enclosure. Includes: Optional Pilot Light. Provides Manual Control and Overload Protection to 1-Phase Motors. Ideal for HVAC Applications, 1-Phase, 1-Pole, 1 HP @ 120/240V AC, 1/4 Hp @ 120/240V DC, 1/4 Hp @ 32V DC. ***Must Add MS Series Overload Protection***

Category: Enclosed Manual Starters / Switches

Industrial Relays W/ Conformal Coat

Category: Power Monitoring Relays

Heat Sink. Pre-Drilled and Tapped. Matches Heat Dissipation Requirements for Relays up to 50 Amps. Specifically Designed for use with D93 Series Solid State Relays. ***D93 Series Relays must be firmly mounted to the heat sink using a suitable thermally conductive grease or thermal transfer pad (item: D93TP1)***

Category: Solid State Relay Heat Sinks

3-Phase 380-500V AC Supply Voltage, Normal Duty: 7.5 HP 11A, Heavy Duty: 5 HP 7.6A, NEMA 1 / IP21, Wall Mount Drive, Frame Size: R1. With Communications Protocol Ethernet/IP, H1: 16.11" H2: 14.57" W: 6.1" D: 8.89" Weight: 13.2Lbs, Cabinet Spacing Requirement (7.87 in. Above / 11.81 in. Below), Deratings Required Elevation > 3300ft - Temperature > 104F, Cooling Requirement (26 CFM/ 172W), ** NOT TO BE USED AS A 3-PHASE POWER SUPPLY ** , **Recommend High Speed Fuses Class T Size 20A **, ** Extended Warranty Available w/ Authorized Startup **

Category: 480 Volt AC Operated High Performance Variable Frequency Drives

(1) Replacement Overload Relay Heater Element for ST Series. ***Amp Range Depends on the Starter Type/Series. Use attached Catalog Page to see the many Range Options***

Category: Heater Elements - Citation Series

80 - 110 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic, Trip Class 10. Selectable Manual or Automatic Reset. For use with A-Line Series, A/AF145 - A/AF185 Frame Contactors.

Category: Overload Relays - Thermal Type

Modular Led Block - 230 V Ac, Integrated Led - Blue - Illuminated

Category: 22mm Front Mount Lamp Blocks

400 Amp, 3-Pole, 600V Rated. IEC Full Voltage Non-reversing Contactor, XT Series, Frame B, with 2 N.O. 2 N.C. Auxiliary Contacts. 240/480 ACDC

Category: IEC Contactors - 66-Over Amp

Manual Pushbutton, Mini-Change Swinger Switch. 3-Pin Connection. SPST. 24/48/120/250V, 0.25/0.6/6/10 Amp. Momentary Contact N/O, On-Off Sequence.

Category: Swinger Switches

200' Thrubeam Detector,ac/dc,ss Relay,cable

Category: Harsh Duty Thru-Beam Photoelectric Detectors

Micro-Change (M12) Dual Keyway with PG9 Cable Fitting, Straight Male 3 Poles, Cable Diameter 3.30-6.60mm

Category: Field Attachable Cordset Connectors

Electronic Timer. On-Delay Range: 0.1 - 100 Seconds. Control Circuit Voltage: 24-240V. Top Mount.

Category: Starter & Contactor Electronic Timing Modules

3-Phase 380-500V AC Supply Voltage, Normal Duty: 25 HP 34A, Heavy Duty: 20 HP 27A, NEMA 1 / IP21, Communications Protocol Ethernet/IPWall Mount Drive, Frame Size: R3. H1: 18.71" H2: 16.54" W: 6.77" D: 10.28" Weight: 22Lbs, Cabinet Spacing Requirement (7.87 in. Above / 11.81 in. Below), Deratings Required Elevation > 3300ft - Temperature > 104F, Cooling Requirement (79 CFM/ 562W), ** NOT TO BE USED AS A 3-PHASE POWER SUPPLY ** , **Recommend High Speed Fuses Class T Size 50A ** , ** Extended Warranty Available w/ Authorized Startup **

Category: 480 Volt AC Operated High Performance Variable Frequency Drives

DriveWindow Light is a reduced version of ABB's full DriveWindow package without hardware Communicates via an RS232 to RS485 adapter

Category: VFD Configuration Software & Cables

Terminal Lug Kit. Kit contains 3 Lugs. Wire Size: #2 - 600 MCM. Wire Type Cu/AL. For use with R9 Series Non-Fused Disconnects.

Category: Disconnect Switch Lug Kits

Assembled, 30.5 mm, Heavy-Duty, Push-Pull Unit, Red Standard Operator, 2 Position, Operating Mode: Maintained Push, Maintained Pull, 40 mm, Illuminated, 120 VAC Bulb, 600V Rated, 1 NC Contact. Includes: "Emergency Stop" Legend. NEMA Rating: 3, 3R, 4, 4X, 12, 13.

Category: 30mm Push-Pull Pushbutton Operators

Freedom Accessory, Auxiliary Contact, For Citation Starter, Sizes 3-5

Category: Definite Purpose Contactor Auxilliary Contacts

Fuse Holder Terminal Block. Color: Gray. Size: 4mm Block.

Category: 4mm Feed Through & Ground Terminal Blocks

Quadruple-Deck Terminal Block For Electric Motor Wiring; Nominal Voltage: 400 Volts; Rated Current: 20 Amps; L1 - L2; DIN-Rail Mounted; Gray

Category: 4mm Feed Through & Ground Terminal Blocks

MMP ACCESSORY FRONT AUX CONTACT SEQ A EARLY-MAKE 2NO

Category: Manual Motor Protector Auxiliary Contact Blocks