"cat 3 splice"

OZ-Gedney Type GH Swivel Ground Hub, Conductor Size: 4 - 2/0 AWG, Length: 1-1/4 IN, Size: 3/4 IN, Malleable Iron, Screws: Steel, Finish: Hot Dip Galvanized, Screws: Zinc Electroplated, 1-11/16 IN Height, Dimension B: 1-7/8 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

3/4" X 10' Ground Rod ( Copper Bonded )

Category: Copper Ground Rods

OZ-Gedney Type BJ Bonding Jumper, Size: 2-1/2 - 3 IN, Clamps: Malleable Or Ductile Iron, U-Bolts: Steel, Braids: Tinned Copper, Finish: Clamp And U-Bolt: Hot Dip Galvanized, 24 IN Fully Extended Braid, Third Party Certification: UL File Number E-24264, CSA 15978, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, For Bonding Two Rigid, EMT Or IMC Steel Conduits

Category: Bonding Jumpers

ARL GC75 3/4"" ZINC GROUND CL

Category: Bare Wire Ground Clamps

Conduit Ground Clamp With Hub, 3/4 Inch Diameter, 8 - 2 AWG, Malleable Iron

Category: Ground Clamps With Hub

Ground Bonding Pigtail, 3 wires, 8" length, Wire #1: #12 AWG Stranded Wire, Ring Terminal terminated to one end of wire and opposite end terminated to flanged spade terminal, Wire #2: #12 AWG Stranded Wire, Ring Terminal terminated to one end of wire and opposite end terminated to flanged spade terminal, Wire #3: #12 AWG Stranded Wire, 8" length, one end of wire strip to 5/8" length, GSH, #10-32 Bonding Screw Included

Category: Solid Wire Ground Pigtails

Ground Rod Clamp, U-Bolt, Three Conductors, 5/8"–3/4" dia, 2/0 Solid-250 kcmil Stranded, 70 mm² Stranded-120 mm² Stranded

Category: U-Bolt Ground Clamps

Bare Ground Clamp, Clamp Material: Bronze, Screw Material: Steel, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Pipe Size: 2-1/2" - 4". *Dottie Part # 10028.* ***Not UL Approved***. For Use in Grounding Bare Copper Wire to Water Pipe, Rebar, Ground Rod or Copper Water Tubing.

Category: Bare Wire Ground Clamps

Ground Rod Clamp, Bronze, 3/4 Inch Rod, 8 to 1/0 AWG

Category: Ground Rod Ground Clamps

Permaground Copper U-Bolt Ground Clamp, Conductor Range 500-300, Pipe Size 3/8in, Ground Rod Sizes 5/8 to 3/4in, Rebar Size #6, UL, CSA

Category: U-Bolt Ground Clamps

Heavy Duty 1 Cable Parallel Ground Connector for 1/2-3/4in 2/0-4 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

Category: U-Bolt Ground Clamps

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 3 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Ground Bonding Pigtail, 3 wires, 8" length, Wire #1: #12 AWG Stranded Wire, Ring Terminal terminated to one end of wire and opposite end terminated to flanged spade terminal, Wire #2: #12 AWG Stranded Wire, Ring Terminal terminated to one end of wire and opposite end terminated to flanged spade terminal, Wire #3: #12 AWG Solid Wire, 8" length, one end of wire strip to 1" length, GSH, #10-32 Bonding Screw Included

Category: Solid Wire Ground Pigtails

OZ-Gedney Type ABG Specification Grade Ground Connector, Conductor Size: 4 - 2/0 AWG, Length: 2 IN, Size: Ground Rod Size: 5/8 IN Or 3/4 IN, Ground Pipe Size: 3/8 IN, Copper Alloy, 1-1/2 IN Height, 2-3/8 IN Width, Third Party Certification: UL File Number E-24264, CSA 015978, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, NEMA : FB-1, For Cable Connection Parallel Or At Right Angles To Pipe Or Rod

Category: U-Bolt Ground Clamps

ERICO FC079 3"

Category: U-Bolt Ground Clamps

Grounding Clamp, U-Bolt, Bronze, .365-.575" wire dia. range, 5/8" or 3/4" rod, 3/8" IPS.

Category: U-Bolt Ground Clamps

Bare Wire Ground Clamp, Closed Lug, 3/8 to 1 Inch, 8 to 4/0 AWG, Bronze

Category: Rebar Ground Clamps

Fence Post Grounding Connector, U-Bolt Type, 3/8 Inch Pipe Size, 2/0 AWG to 250 MCM Wire Size, For Use as Parallel or 90 Degree Connection, Copper Conductors Only, Rated for Direct Burial

Category: U-Bolt Ground Clamps

3" Grounding Wedge, Bronze with Tin Plating. For use with Rigid/IMC Conduit.

Category: Ground Wedges

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 3/8 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 3 Inch, 2/0 AWG to 250 MCM, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

HARGER APC2.5/3 ALUMINUM PIPE CLAMP 2.5"-3"

Category: U-Bolt Ground Clamps

nVent ERICO copper bonded rods combine the strength of steel for ease of installation and molecularly bonded copper, with roll threading process for long lasting corrosion resistance. 3/4" x 10' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Threadless compression coupler for use with pointed copper-bonded ground rods. Silicon Bronze, 3/4" dia.

Category: Ground Rod Couplings