Search results

Ground Rod Connector, 3/8" Pipe Size, 10-4 Wire Size, Silicon Bronze, 0.375" Length

Category: Ground Rod Ground Clamps

Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

1 Port Panelboard Lug 600 MCM - 2 AWG Large size set screw connectors with multiple mounting holes for a secure, turn-prevent connection. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. For use with copper or aluminum conductors. 600V (2000V max, per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.75".

Category: Aluminum Panelboard Lugs

NSI HWHS6-40-12 6-4/0 AWG HEA

Category: Heavy Wall Heat Shrink

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 6 AWG - 3/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap Connector, Insulated, 3 Port, Dual Sided, 6 AWG - 600 MCM, Aluminum With Clear Plastisol Insulation

Category: Dual Sided Entry Wire Connector Blocks

Closed End Connector, Nylon, 22-18 AWG, Box Of 100

Category: Crimp Cap Insulators

Easy-Twist Ceramic Twist-On Connectors, Medium, 22-10 AWG, 15 Pack

Category: High Temperature Wire Connectors

Easy-Twist Ceramic Twist-On Connectors, Small, 22-14 AWG, 15 Pack APPLICATIONS:

Category: High Temperature Wire Connectors

Power Distribution Block, Black, 600V, (2) 2/0-14 AWG (Line) - (2) 2/0-14 AWG (Load), Aluminum Body - Glass-Filled Polyester Base

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Easy-Splice Gel Tap Splice Kit with Connector for #14 - #2 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 14 AWG - 1/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Polaris Vision Tap™ Insulated Tap Connector, Off-Set (Dual Sided Entry), 4-14 AWG, 2 Conductors, 600V, Clear, Plastisol

Category: Single Sided Entry Wire Connector Blocks

Polaris Vision Tap Insulated Tap Connector, Off-Set (Dual Sided Entry), 3/0 - 6 AWG, 2 Conductors, 600V, Clear, Plastisol

Category: Single Sided Entry Wire Connector Blocks

Polaris™ Insulated Multi-Tap Connector, 5 Port (Dual Sided Entry), 500 MCM - 4 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Polaris™ Insulated Multi-Tap Connector, 8 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Cable Connector Block Replacement Sleeves for ITOG-1

Category: Copper Crimp Connectors

Cable Connector Block Replacement Sleeves for ITOG-6

Category: Copper Crimp Connectors

Polaris™ Insulated Multi-Tap Connector, 5 Port (Dual Sided Entry), 3/0 - 6 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

6-Port Clear Multi-Tap Pre-Insulated Connector, 250MCM – 6 AWG

Category: Dual Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 750 - 250 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Ground Clamp HD with Adapter, Silicon Bronze, 1/2"-1" Water Pipe, 10 SOL-2/0 STR, Length: 2.2"

Category: Ground Clamps With Hub