Search results

Insulated Multi-Cable Connector Block for Fine Stranded Flexible Copper Conductors, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 14 AWG - 6 AWG, Abrasion and Chemical Resistant. Rated for use with Copper Conductors.

Category: Single Sided Entry Wire Connector Blocks

NSI WAGS-750-10 EASY-SPLICE W

Category: Low Voltage Heat Shrink Splice Kits

16-14 AWG Vinyl Insulated Spade #8 Stud, 100 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

Copper C Tap Grounding Connector for 6 to 8 AWG Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

(1) 350 Mcm - 6 Awg Primary (6) 4-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Vinyl Insulated Ring Terminal, 16-14 AWG, 300 Volt, Blue, #8 Stud - 1000 Per Pack

Category: Vinyl Insulated Ring Tongues

22-18 AWG Vinyl Insulated Ring #10 Stud, 100 Per Pack

Category: Vinyl Insulated Ring Tongues

Easy-Twist Standard Twist-On Wire Connectors - Standard Grey Small Jar 22-14 AWG APPLICATIONS: Easy-Twist Standard Twist-On Wire Connectors have a flame retardant UL 94V-2 thermoplastic shell that provides excellent electrical insulation. Their fixed, precise square wire spring provides secure gripping of conductors. Their deep skirt entry provides protection from flashover and shorts. Sure-grip ribs improve gripping comfort. Compact design ensures proper installation, especially in tight spaces. Threaded funnel entry guides the wires into the connector easily. Pre-twisting of wires is not necessary. Zinc-plated springs for low contact resistance. 1000V max in fixtures and signs. UL 486C Listed Wire Connector. For Copper Wire Only.

Category: Color Coded Wire Connectors

Vinyl Insulated Locking Spade, 12-10 AWG, #8 Terminal Size, 300 Volt, Yellow, 50 per Pack

Category: Vinyl Insulated Standard Fork Terminals

CU CMP LUG LONG 250 MCM 3/8 BOLT-BELL

Category: 2-Hole Long Barrel Copper Compression Lugs

Standard Wire Connector, Red, Easy Twist, 22-10 AWG, Small Jar of 100

Category: Color Coded Wire Connectors

NSI GP-250 250MCM PARALLEL TA

Category: Aluminum Tap Lugs

Standard Wire Connector, Yellow, Easy Twist, 22-10 AWG, Bag Of 500

Category: Color Coded Wire Connectors

8 Wire Polaris Insulated 750 - 250 MCM Heavy Duty Connector Block, Either Side Wire Entry Polaris Insul-Tap Heavy Duty Connectors are double the size of the standard IPLD Series connector with two pressure screws provided for each cable to ensure the best connection possible. Designed, built and tested to handle even the most demanding applications from 250 MCM to 750 MCM. Insulated with high-dielectric strength plastisol molded for a precise fit. Supplied with removable access plugs to allow for cable entry from either side of the connector. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV Resistant. Will not support combustion. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

NSI APS350 2/0 STR - 350 MCM

Category: Aluminum Split Bolts

Vinyl Insulated Ring Terminal, 22-18 AWG, #6 Stud, 300 Volt, Red, 1000 per Pack

Category: Nylon Insulated Ring Tongues

Vinyl Insulated Ring Terminal, 12-10 AWG, 1/2" Stud, 300 Volt, Yellow, 40/Pack

Category: Vinyl Insulated Ring Tongues

Tap Connector For Copper To Copper, 800 - 600 MCM Main, 800 MCM - 2 SOL Tap, 600 Volt, Bronze

Category: 2-Bolt Bronze Tap Connectors

NSI L2N-14P #2 AWG MAX WIRE S

Category: 2-Hole Long Barrel Copper Compression Lugs

insulated Terminal Block, 35 Amp, 12 Circuit

Category: Single Sided Entry Wire Connector Blocks

#8 BARE SPADE #10 STUD

Category: Non-Insulated Standard Fork Terminals

.125/ .062 Easy-Splice Thin Wall Tubing 6" - Pack of 15 Flexible flame-retardant, thin wall, general purpose heat shrinkable polyolefin tubing has a 2:1 shrink ratio. Used for electrical insulation, wire harness bundling, wire jacket marking and color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6" lengths in blister boxes or in economical 25' spools. UL recognized to Standard 224. Black, white and colored thin wall tubing meet MIL-DTL-23053/5, Class 1. Clear meets MIL-DTL-23053/5, Class 2 and is not flame retardant. Rated 600 Volts, 125 C.

Category: Thin Wall Heat Shrink

NSI IPLMD750-8 750-250 MCM NO

Category: Dual Sided Entry Wire Connector Blocks

All Purpose Split Bolt Connector 3 AWG All Purpose Split Bolt Connectors are used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.

Category: Copper Alloy Split Bolts