Search results

For adapting PN03 or PN05 Series Raceway to a PN10 trunking through the PN10F15 Tee Fitting.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

6' Steel Plugmold Multioutlet Strip with 3 duplex receptacles spaced at 24", GB Finish - Ivory

Category: Single Circuit Steel Plugmold

Non-Metallic, Flexible Corduct. 1200 Series. Size: 50' Length, 2-1/2" Width, 14/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway

Non-Metallic, 2A, Dual Flushmount NORDX/CDT Unloaded Module. Gray.

Category: Keystone Modules For Metallic Raceway

WMD PDB1CMFW NM DATA BOX FOR

Category: 1-Gang Raceway Device Boxes

W-mold Amdtp-a 20a125v Pwrdis t Pole

Category: Power Pole Covers

For feeding corner drop raceway from larger conduits. Has concentric 3/4", 1", and 1 1/2" trade size KOs. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

2400D Series Right angle turns on same surface. Finish - Ivory

Category: Small 2-Piece Metallic Raceway Elbows

For use with 2400D-2N. Allows both power and low voltage at a single point-of-use. Accepts 5507 Series Faceplates, Ortronics TracJack and Series II Modules (requires S2-EPL Plate), Pass and Seymour Activate Series Inserts (requires CM-EPLA Plate), and Wiremold Open System Communication Modules (requires CM-EPLA Plate). Fog White

Category: Communication Module End Plates For Metallic Raceway

Includes two Pass and Seymour 20A Duplex Receptacles with 12" wire leads installed on bracket. Two combination twistouts accept either modular furniture adapters or Keystone RJ45s. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 4-Gang Raceway Box Covers

For mounting two CM2 Series modules or Pass and Seymour Activate Series devices modules. White

Category: 1-Gang Raceway Device Brackets & Plates

Non-Metallic, Duplex Receptacle Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, Light Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

5' Steel Plugmold Multioutlet Strip with 5 duplex receptacles spaced at 12" GB Finish - Ivory

Category: Single Circuit Steel Plugmold

90 degree external corners. Connect to raceway with G4001 Couplings (not included).

Category: Large 2-Piece Metallic Raceway Elbows

50' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Black

Category: Non-Metallic Overfloor Raceway

Makes 90 degree internal corners. Two AL2401 Couplings included.

Category: Small 2-Piece Metallic Raceway Elbows

Wmd Pn03f19v Fiber Radius Out ide Elbow Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

Connects end of 3000 Series Raceway to 1 1/2" trade size conduit or armored cable.

Category: Metallic Raceway Connectors & Adapters

WMD PN10L10-W

Category: 1-Piece Non-Metallic Raceway

For branch raceway at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Ivory

Category: Small 2-Piece Metallic Raceway Tee Fittings

Steel, Power/Data Pole. Color: Gray. Length: 15'5". (2) Spec Duplex Outlets, 20A, 125V. Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

W-mold G20gba612 Gry 4w2ckt plugmld

Category: Single Circuit Steel Plugmold

The Wiremold Corduct 1200, 1400, and 1600 Series Overfloor Cable Protection Systems conceal wires and cords creating a smooth, trip-free surface instantly. Corduct can be applied to any flooring system with pressure-sensitive tape. Yellow

Category: Non-Metallic Overfloor Raceway