"74474 current lighting solutions"

3 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

10 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

300 Amp Class J Dual-Element, Time-Delay Fuse, 600 Volt, LOW-PEAK, 10 Seconds (minimum) Time-Delay at 500% rated current; 300,000A Interrupting Rating

Category: Class J Power Fuses

400 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

Fuse, 250 Amp, Class J, Dual-Element, Time-Delay, 600 Volt, LOW-PEAK, 10 Seconds (Minimum) Time-Delay at 500% Rated Current; 300,000A Interrupting Rating

Category: Class J Power Fuses

350 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

12 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

45 Amp Class J Quick-Acting Fuse, Current-Limiting, 600 Volt, Single-Element, Provides superior short-circuit protection; Protects low interrupting capacity circuit breakers; Well suited for lighting and heating circuits and other non-inductive loads

Category: Class J Power Fuses

250 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

225 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

Eaton Bussmann series DFJ high speed fuse, 600 Vac or less, 450 Vdc or less, 17.50A, 200 kAIC at 600 Vac, 100 kAIC 450 Vdc, Non Indicating, High speed fuse, Ferrule end X ferrule end, Class J, Melamine tube

Category: Class J Power Fuses

450 Amp Class J High Speed Drive Fuse, 600Vac/450Vdc

Category: Class J Power Fuses

JLS UL CLASS J FAST-ACTING FUSE 450A. JLS series fuses provide space-saving, fast-acting overload and short-circuit protection for non-inductive loads. When used for motors or other inductive loads, the ampere rating of JLS series fuses must be increased to prevent nuisance opening on inrush currents. In such applications, JLS fuses may provide only short circuit protection. Consider using Littelfuse POWR-PROÖ JTD series time-delay fuses in such circuits. Applications: General purpose circuits with little or no motor load. Resistive loads, such as resistance electric heat. Loads requiring fast-acting overload protection, such as equipment containing solid-state devices. Space Saving: JLS fuse characteristics are similar to KLNR/KLSR fast-acting Class RK1, but they are much smaller. Safety: 200,000 A.I.R. ù Reliable interruption of all overcurrents up to 200,000 amperes. Extremely current limiting ù Stops damaging short-circuit current faster than any mechanical protective device. Fast-Acting ù Provides fast-acting protection to equipment such as variable speed drives, rectifiers and other equipment containing surge-sensitive components. Longer Equipment Life: Current-limiting design reduces damage to equipment caused by heating and magnetic effects of short-circuit currents. Economical: Extremely current-limiting design often permits use of readily available, less costly equipment. Manufacturers of equipment containing dual voltage devices can simply manufacturing and reduce inventory by standardizing on 600 volt JLS fuses and Class J fuse blocks for all AC voltage ratings. Easy to Use: 200,000 A.I.R. rating minimizes need for short-circuit calculations.

Category: Class J Power Fuses

12 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

110 Amp Class J Quick-Acting Fuse, 600 Volt AC, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

450 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

Low-Peak Current Limiting Time Delay Fuse, 175 A, 600 VAC 300 VDC, 300 kAIC, Class J, Cartridge Body

Category: Class J Power Fuses

90 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

Fuse, 7 Amp, Class J, Dual-Element, Time-Delay, 600 Volt, LOW-PEAK, 10 Seconds (Minimum) Time-Delay at 500% Rated Current; 300,000A Interrupting Rating

Category: Class J Power Fuses

Fuses, Time Delay, Brand Or Series: Class J, Indicator, Current Rating: 3 2/10amp, Interrupting Rating: 200000 Amp Ac Rms Symmetrical, Terminal Type: Cartridge, Dimensions: 13/16 Diameter X 2 1/4 Length Inch, Voltage Rating: 600 Vac, Material: Stone Sand

Category: Class J Power Fuses

600 Amp Class J Dual-Element, Time-Delay Fuse, 600 Volt AC, LOW-PEAK, 10 Seconds (minimum) Time-Delay at 500% rated current; 300,000 Amp Interrupting Rating

Category: Class J Power Fuses

8 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

5 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses

600 Amp Class J Quick-Acting Fuse, 600V, Limitron, Single-Element, Current-Limiting

Category: Class J Power Fuses