"705-sr a"

The cable tie mount in black is applied with a #8 (M4) screw and is 0.43" (10.9 mm) wide. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages

Category: Cable Tie Bases

The pan-post standoff is natural color and requires a #10 (M5) screw. It measures 1.06" long x .072" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 10.

Category: Cable Tie Bases

Latching flat cable mount, 1.20" (30.5mm) cable width, gray, standard package.

Category: Cable Tie Bases

The Metal Clip-On Cable Tie Mount, Clips Onto The Edge of Any Extended Surface, 0.46" High x 0.56" Wide (11.5 x 14.2 mm), Made of Zinc-Plated Steel, It Supports a Maximum Panel Thickness of 0.24" (6.1 mm), Used With Miniature, Intermediate and Standard Cable Ties, Indoor, Package of 100

Category: Cable Tie Bases

Cable Tie Mount, 4-Way, Adhesive Backing, Nylon, 1" Long x 1" Wide (25.4 x 25.4 mm), Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 500

Category: Cable Tie Bases

Snap-In Cable Tie Mount, Adhesive-Backed, 0.31” x 2.06” (7.9 x 52.3mm), ABS Material, Ivory, Package of 500

Category: Cable Tie Bases

Low Profile Cable Tie Mount, Attach With a #5 (M3) Screw, Made of Nylon 6.6, For Use With Miniature Cable Ties, Indoor, Color: Black, Package of 1000

Category: Cable Tie Bases

The 4-way mount in black is applied with user-supplied adhesive or a #6 (M3) screw and measures 1" x 1" (25.4 mm x 25.4 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is des

Category: Cable Tie Bases

The cable tie mount in black is applied with a #4 (M2.5) screw and is 0.32" (8.1 mm) wide. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in package

Category: Cable Tie Bases

Stud Cable Tie Mount, Installed Onto a 0.38" (9.7mm) Stud, Weather Resistant Nylon 6.6, Black, Package of 500

Category: Cable Tie Bases

The push button cable tie mount requires a 0.25" (6.4 mm) hole and is natural color. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

Cable Tie Mounting Base, Natural Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 19.05mm (0.75 Inches), Width of 19.05mm (0.75 Inches), Height of 5.21mm (0.205 Inches), Acrylic Adhesive Mounting Method, 100 Pack

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1.5" long x 1.5" wide (38.1 x 38.1 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

Category: Cable Tie Bases

The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

The stainless steel type 304 tie mount uses 1 hole foldover mounting with a #8 (M4) screw. It comes in packages of 100.

Category: Cable Tie Bases

Aluminum Cable Tie Mount, 0.5" Width, 1" Height, Installed With a #10 (M5) Screw, Package of 1000

Category: Cable Tie Bases

Masonry Push Barb Cable Tie Mount, Nylon 6.6, Requires a Hole Diameter of 0.38" (9.7 mm), Indoor, Used With Miniature, Intermediate, Standard, Light-Heavy, Heavy, and Hook and Loop Mount Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

Winged Push Barb Cable Tie Mount, Requires a 0.25” (6.5mm) Hole, Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

The pan-post standoff is natural color and requires a #12 (M5.5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 10.

Category: Cable Tie Bases

Latching flat cable mount, 2" (50.8mm) cable width, gray, standard package.

Category: Cable Tie Bases

Cable Tie Mount, 4-Way, Adhesive Backing, Nylon, 1" Long x 1" Wide (25.4 x 25.4 mm), Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The right angle base in black accepts a flat cable width of 2.0" (50.8 mm) and is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and comes in packages of 1000.

Category: Cable Tie Bases

The cable tie mount is black and is applied with a #8 (M4) screw. It is 0.66" (16.7 mm) long and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with cable ties Super-Grip® mini

Category: Cable Tie Bases