Search results

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories: miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper. Mini Cover size.

Category: Non-Insulated Connector Block Covers

Surge Protective Device, SPD - Type 1, 240/120V, 25kA, LED Indication Neutral Wire

PDB 1P AL INTERMEDIATE UL1953

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Cover, 1-Pole, for Intermediate Series, Snap On

Category: Non-Insulated Connector Block Covers

Power Distribution Block, Large, 1-Pole, Snap-On, Safety Cover, Hinged

Category: Non-Insulated Connector Block Covers

Fuse, Amp-Trap 2000-«, 600 Volt AC/DC, 80 Amp, Time-Delay, Class J, AJT Series, Smart-Spot

Category: Class J Power Fuses

Fuse, Amp-Trap 2000-«, 600 Volt AC/DC, 40 Amp, Time-Delay, Class J, AJT Series, Smart-Spot

Category: Class J Power Fuses

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 70 Amp, Fast-Acting, Class T, A6T Series  

Category: Class T Power Fuses

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 200 Amp, Fast-Acting, Class T, A6T Series  

Category: Class T Power Fuses

SAFETY COVER 600V 30A

Category: Fuse Covers

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Power Distribution Block, Intermediate Aluminum, 350 Amp CU, 310 Amp AL, 1 x 4 AWG - 500 MCM, 4 x 14 - 2/0 AWG, Box Lug

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Fuse, R-Rated, 170 Amp, 4.8 kV, 12.5 Clip Center, 15.88 Length, Size 6R

Category: R-Rated Motor Circuit Protection Fuses

High Speed Fuse Amp-Trap® A60Q 600VAC 600VDC 15A Ferrule

Category: Semiconductor Fuses

Time Delay Fuse, Class J, 125 Amp, 600 Volt AC, 300kA Interrupting Rating

Category: Class J Power Fuses

Back-Up R-Rated Medium Voltage Fuse 5080VAC 9R Mounting: Bolted Style: DAR0 Visual Indicator Amp-Trap®

Category: R-Rated Motor Circuit Protection Fuses

A60Q Amp-trap Form 101 Semiconductor Protection fuses feature the only 600 volt AC/DC rating in the industry of similar size (1-1/2" x13/32") fuses protecting semiconductors. A60Q also has the lowest I²t of all similar fuses and excellent cycling ability. Applications include inverters and small equipment requiring extremely fast response to faults, without the need to carry sustained heavy overloads.

Category: Semiconductor Fuses

FERRAZ A480R12R-1 4800V R-RAT

Category: R-Rated Motor Circuit Protection Fuses

FRZ MPDB69143

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Fuse, Potential Transformer, 0.5 Amp, 15.5 kV, EJ-1, 11.5 Inch, Clip Center, 120 kAIC

Category: Potential Transformer Fuses

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 40 Amp, Fast-Acting, Class T, A6T Series  

Category: Class T Power Fuses

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses come with a 3 (size D) or 4 (size E) inch diameter barrels with ferrules and are mounted in spring reinforced clips. 1500 Volts 5 Amps A480R series.

Category: R-Rated Motor Circuit Protection Fuses

Fuse Holder, 60 Amp, 600 Volt AC/DC, Class J, 3-Pole, Ultrasafe, Blown Fuse Indicators

Category: Class J Finger Safe / Dead Front Fuse Holders

Fuse, 40 Amp, 1000 Volt AC, Amp-Trap, Style P, Bolt In, Blades

Category: Semiconductor Fuses