Search results

In-line Resin Splicing Kit, Non-Shielded, Conductor Range: 6 to 1/0 AWG, Maximum Conductor O.D.:0.80 Inch, Minum Conductor O.D.: 0.25 Inch, For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Scotch® Termination Kit 5701 includes sufficient materials to make 3 terminations. This kit is designed to terminate solid dielectric shielded power cables with tape shield, wire shield, UniShield® and concentric neutral construction in weather protected areas.

Category: Medium Voltage Cold Shrink Splice Kits

4-POINT JUNCTION W/O BRKT

Category: Loadbreak / Deadbreak Junctions

Modular Splice Kit, Cold Shrink, 15 kV, Shielded cable, Insulation Range: .785 - .970", Wire Range: 1/0 - 2/0 AWG. ***Used with 5815 Series Modular Equipment Tee.***

Category: Medium Voltage Cold Shrink Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

KUBE Sealant for use with T&B Motor Disconnect Boots, Width 1 Inch, Length 10 Feet, Thickness 1/8 Inch, Polybutene Compound

Category: Low Voltage Motor Lead Splice Kits

TB 201-31879-1 COMPOUND

Category: Insulating & Sealing Compound

Modular Splice Kit, Cold Shrink, 15 kV, Shielded cable, Insulation Range: .980 - 1.140", Wire Range: 250 MCM. ***Used with 5815 Series Modular Equipment Tee.***

Category: Medium Voltage Cold Shrink Splice Kits

Modular Splice Kit, Cold Shrink, 15 kV, Shielded cable, Insulation Range: .785 - .970", Wire Range: 2/0 - 3/0 AWG. ***Used with 5815 Series Modular Equipment Tee.***

Category: Medium Voltage Cold Shrink Splice Kits

3M 5810-A-4/0 15KV-200A INDU

Category: Loadbreak Elbows