"ala4800b-10 co"

Closes off open end of S4000 Base. Use where one end feed is required in an undivided installation. Includes one 1/2" - 3/4" trade size KO and two No. 10-32 ground terminals.

Category: Large 2-Piece Metallic Raceway End Fittings

WMD PN10L10FW PN10 10FT LATCH

Category: 1-Piece Non-Metallic Raceway

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

Has one 2" trade size knockout.

Category: Recessed Floor Box Service Fittings

For transitioning from MXN2A08 Corner Drop to a horizontal run of 5400TB Series Raceway to the left. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Ten 20A outlets with t-slots, 15' (4.6m) cord. Length 48" (1.2m). Receptacle center-to-center 4" (101mm). 20 Amp unit with a 20A resettable circuit breaker.

Category: General Duty Power Strips

Ten 20A outlets with t-slots, 15' (4.6m) cord. Length 48" (1.2m). Receptacle center-to-center 4" (101mm). 20 Amp unit with a 20A resettable circuit breaker. Available in straight blade or Locking Plug.

Category: General Duty Power Strips

Wall Duct Fitting, T-Unit, Surface Cover

Category: 2-Piece Non-Metallic Raceway Tee Fittings

WMD EFB810-TUN EVOL FLR BX 8

Category: Recessed Floor Box Service Fittings

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

WMD EFB10-MOS EFB10 MOSAIC DE

Category: 1-Gang Single Receptacle Wallplates

Ten outlets. 15' (4.6m) cord. Length 48" (1.2m). 15A resettable circuit breaker. Computer grade surge protection, 15 Amps.

Category: General Duty Power Strips

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Branch connection of two runs of AL5200 Series Raceway. Includes three pairs of AL5201 Couplings.

Category: Large 2-Piece Metallic Raceway Tee Fittings

Floor Box Surface Cover With Carpet Insert, 6 to 10 Gang, Size: 16-3/8 Inch Length, 12-1/2 Inch Width, For Use With: Evolution Series 6, 8, and 10-Gang Floor Boxes, Aluminum, Color: Black

Category: Square / Rectangle Recessed Box Covers

PN 10 Series Radiused External Elbow. For right angle turns around external corners. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

WMD PN05L10-W NM LATCHING RAC

Category: 1-Piece Non-Metallic Raceway

WMD PN10L10V PN10 10FT LATCHI

Category: 1-Piece Non-Metallic Raceway

Floor Box Surface Cover With Carpet Insert, 6 to 10 Gang, Size: 16-3/8 Inch Length, 12-1/2 Inch Width, For Use With: Evolution Series 6, 8, and 10-Gang Floor Boxes, Aluminum, Color: Brass

Category: Square / Rectangle Recessed Box Covers

Floor Box Flsuh Cover With Solid Lid, 6 to 10 Gang, Size: 16-3/8 Inch Length, 12-1/2 Inch Width, For Use With: Evolution Series 6, 8, and 10-Gang Floor Boxes, Aluminum, Color: Nickel

Category: Square / Rectangle Recessed Box Covers

20A configuration. Four outlets, white finish. 6' (1.8m) cord. Length 10 3/4" (237mm). Receptacle center-to-center 1 1/2" (38mm). cTUVus Listed as Medical Electrical Equipment. Suitable for use where Article 517 of the NEC requires Hospital Grade Outlets.

Category: Medical Grade Power Strips

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Plug-In Outlet Center Unit, Length: 13 Inch, Width: 3-1/2 Inch, 15' Cord, 10 Outlets, Lighted Switch.

Category: General Duty Power Strips