"ab-18126rb the austin co."

The Thermostat Probe is installed under the flooring surface and connects to nVent NUHEAT thermostats. It is included with all nVent NUHEAT thermostats and provides a temperature reading of the floor. Our floor heating sensor probes 10 kilo-ohm resistance sensors and the two wires of the sensor are 22AWG. The standard length of the sensor wire is 15 feet. They are included in the boxes of all of our models of thermostats.

Category: Heater Temperature Sensors

The MILWAUKEE® M18 FUEL™ 16 Gauge Straight Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging the nitrogen air spring mechanism, the 16 Gauge Straight Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with the POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access to tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18™ REDLITHIUM™ CP2.0 battery pack, this battery-powered nailer fires up to 700 nails per charge and is fully compatible with all M18™ REDLITHIUM™ batteries. The MILWAUKEE® M18 FUEL™ 16 Gauge Straight Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cordless.

Category: Cordless Nail Guns

Snap-In Connector, QuickPort, GigaMax 5e, CAT 5e, 8P8C, Channel-Rated, Color: White.

Category: Snap-In Cat 5e Jack Inserts

The Winterized Insert will help decrease cold air leakage from the attic into the home when the QuietCool fan is not in use. The Winterized Insert is made up of a Vacuum Insulated Panel which contains an R value of 40. Combined with the QuietCool Pro Series fans, there will be an R45 barrier between the attic and living space in the off-season.

Category: Fan Winter Inserts

15 Amp, 125 Volt Receptacle, 20 Amp, 125 Volt Feed-Through, Self Testing, Tamper Resistant, SmartLock Pro Slim GFCI, Monochromatic, Back & Side Wired, Nylon Wallplate & Self Grounding Clip Included - Ivory

Category: Tamper Resistant GFCI Receptacles

1-Gang, (1) 1.600 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: 302 Stainless Steel, Device Mount, Locking - Color/Finish: Stainless Steel.

Category: 1-Gang Single Receptacle Wallplates

15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Duplex Receptacle/Outlet, Straight Blade, Grounding, Quickwire Push-In & Side, Standards and Certifications: UL/CSA, Warranty: 2 Year Limited, NEC compliant – Ivory

Category: Tamper Resistant Residential Grade Receptacles

The Winterized Insert will help decrease cold air leakage from the attic into the home when the QuietCool fan is not in use. The Winterized Insert is made up of a Vacuum Insulated Panel which contains an R value of 40. Combined with the QuietCool Pro Series fans, there will be an R45 barrier between the attic and living space in the off-season. 14 x 36 in.

Category: Fan Winter Inserts

15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Decora, Duplex Receptacle/Outlet, Straight Blade, Grounding, Quickwire Push-In & Side, Standards and Certifications: UL/CSA, Warranty: 2 Year Limited, NEC compliant - Black

Category: Tamper Resistant Residential Grade Receptacles

Wallplate Insert, Decora, QuickPort, 2-Port, Empty, Box Mount, Color: White.

Category: Snap-In Wallplate Inserts

LED Retrofit w/FlexColor for Shoebox/Wallpack: 80 Watt, 10600/10700/10800 Lumens, Color Selectable Temperature: 3000K/4000K/5000K, EX39 Base. Light panel can rotate once the base is tightened to direct light out of the fixture. Enclosed fixture safe and approved for damp locations. Lamps dim to 50% by selecting “LO” on the switch located on the top of the lamp. *DLC Code: PE1R64EU.

Category: Post Top / Site / Wall Pack LED Lamps

2-Gang, No Device Blank Wallplate, Standard Size, 430 Stainless Steel, Box Mount - Stainless Steel

Category: 2-Gang Blank Wallplates

2-Gang, 1-Toggle 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Toggle Switch / Decorator-GFCI Combination Wallplates

1.0 HP @ 120V AC Switch Rating, 20 Amp 120V Feed-Through, Self Testing, Slim SmartLock PRO GFCI, Monochromatic, Blank Face, Back & Side, Self Grounding Clip Included, Buttons Match Face Color - White

Category: In-Wall - Blank GFCI

Interconnect, Wireless, Battery-Operated Smoke & Carbon Monoxide Alarm with Voice Alerts, Voice Warning With Location, Voice Tells What The Danger Is And Its Location, Replaceable AA Batteries Included, White, Cat # SMC0500V

Category: Combination Smoke & Carbon Monoxide Detectors

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Connector, Straight Blade, Industrial Grade, Grounding - Black/White

Category: 15 Amp Straight Blade Connectors

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, With Ears Duplex Receptacle, Straight Blade, Residential Grade, Grounding, All Screws Backed Out Contractor Pack, Quickwire Push-In & Side Wired, Steel Strap - White

Category: 15 Amp Residential Grade Duplex Receptacles

The TF65-28 thermal overload relay is an economic electromechanical protection device for the main circuit. it offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. further features are the temperature compensation, trip contact (nc), signal contact (no), automatic- or manUAl reset selectable, trip-free mechanism, stop function and a trip indication. The overload relays are connected directly to the block contactors. single mounting kits are available as accessory.

Category: Overload Relays - Thermal Type

Modbox™ Components Easily Interconnect For A Customized Mobile Workstation, Easily Attach And Move The Cup Holder Onto Any System Side Rail With One-Handed Release For Added Convenience, Keep Your Favorite Drink Within Reach With The Klein Tools Modbox™ Cup Holder Rail Attachment, Cup Holder Swivels To Keep Your Drink Upright When The Modbox™ System Is Tilted And In Motion, Flexible Fingers Adjust To Secure Different Sizes Of Drink Containers, Store Beverage Holder Inside The Rolling Toolbox And Medium Toolbox (Cat. Nos. 54802Mb, 54803Mb) With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately, Perfect Fit For The Tradesman Tumbler (Cat. No. 55580), Sold Separately

Category: Components Kits

Quad-12 Deep Well Heavy-Duty Impact Flip Sockets Contain 12 Hex Sizes Combined Into 3 Color-Coded Sockets, Spring-Loaded Action Allows For Hands-Free Access To Either Hex Size By Simply Applying Pressure To The Smaller Socket To Compress It Out Of The Way, Heavy-Duty Impact Sockets And Adapters Are Made Of Heat Treated Cold Forged Steel For Long-Lasting, High Torque Applications, Industry-Standard Color-Coded Painted Rings To Quickly Identify Hex Sizes, Deep Well Sockets Are Ideal For Managing Extended Threads, Recessed Bolts, And Confined Spaces, Offering Exceptional Reach And A Reliable Grip, Store The Small (1/4 To 7/16-Inch) And Medium (1/2 To 11/16-Inch) Quad-Sockets On The Long 1/4-Inch Shaft To Efficiently Swap Between Any Combination Of 8 Hex Sizes For Speed On The Job, Specialized Klein Knect™ (M) Square Drive Adapter For The Large Socket Is Compatible With Klein Tools Pass Through Socket Wrench, 3/8-Inch Square Drive Ratchets And Impact Drivers

Category: Sockets & Socket Sets

The RayClic-LE Lighted End Seal Kit is for use with Raychem IceStop, XL-Trace and HWAT heating cables. The connection is designed to be installed above the pipe insulation or mounted on the wall at the end of the heating cable circuit ***Temporary Raw Material Shortage Will Not Be back in Stock Until Nov 2024***

Category: Heat Cable Splice Kits

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 percent and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Category: DIN Mount Uninterruptable Power Supplies

6 Piece Drill/Tap Kit, Sizes: 6-32 - 1/4-20, Hex Shank Size: 1/4", Material Thickness: 10 GA

Category: Combination Drill / Tap Bit Kits

4-Gang, Decora/GFCI Device Decora Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: 4-Gang Decorator Wallplates