"t8-4ft-dim-18w-50k-c"

Series C NEMA J-frame Molded Case Circuit Breaker, Type Hjd, Cable In/cable Out,3-pole, 150 Amp, 600 Vac, 250 Vdc, Adjustable Thermal-magnetic Trip

Category: 600V Rated Molded Case Circuit Breakers

Plug to Receptacle Adapter from 15A/125V, NEMA 5-15P Plug to 15A/125V, NEMA L5-15 Receptacle

Category: Wiring Device Adapters

GM-1X IceStop Self-Regulating Heating Cable. Provides roof and gutter de-icing, suitable for all standard materials of gutters and drainpipes. Power output is 36 W/m at 0 °C in ice water, 18 W/m at 0 °C in air.

Category: Wet Area Heat Cable

Conduit Bushings, Type: Threaded, Size: 3/4 Inch, Maximum Temperature Rating: 150° Celsius, Material: Thermoplastic

Category: Rigid & IMC Bushings

SILFLEX® Control Cable (C), AWG 18/03C, Gray

Category: Continuous Flex Control Cable

SUPERFLEX® TRONIC (C) PUR TP, AWG 24/04TP, Gray

Category: Oil Resistant Control Cable

DRIVEFLEX® XLPE (C) 1 TSP, AWG 12/04C RHW-2, Black

Category: VFD Tray Cable

Contactor Accessory Front Aux Seq A Frame B-c 2nc

Category: Starter & Contactor Auxiliary Contacts

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

C-h E48kl09 Actuating Key horizontal / 7.8" (200mm)

Category: Assembled Miniature DIN Safety Interlock Limit Switches

Molded case circuit breaker accessories, Field mounted undervoltage release mechanism, For J-frame HMCP breakers, Pigtail leads, Left-hand mounting, 110-127V, J-frame, Series C

Category: Molded Case Circuit Breaker Undervoltage Releases

Series C NEMA K-frame Molded Case Circuit Breaker, Type Hkd, Cable In/cable Out,3-pole, 225 Amp, 600 Vac, 250 Vdc, Fixed Thermal-magnetic Trip

Category: 600V Rated Molded Case Circuit Breakers

5 Kva Rating, 1-phase, General Purpose Transformer, Sand And Resin Encapsulated,480v, 120/240v, 115 Degree C, Aluminum Windings

Category: 5 KVA Dry Type Transformers

30 Kva Rating, 3-phase, General Purpose Transformer, Sand And Resin Encapsulated, 480v, 208y/120v, 115 Degree C, Copper Windings

Category: 30 KVA Dry Type Transformers

C-h E48kl08 Actuating Key vertical / 7.8" (200mm)

Category: Assembled Miniature DIN Safety Interlock Limit Switches

The E150 product line consists of Thermal Magnetic Circuit Breakers, Magnetic Circuit Breakers, and Molded-Case Switches rated up to 150 Amps and 600 Volts AC. Catalog numbers include the complete breaker or switch. The WL catalog number suffix indicates that the devices come with Cu/Al line and load lugs. All TEB, TED, THED breakers suitable for reverse feed. 60/75 C rating through 100 amperes, 75 C rating above 100 amperes. 3 POLE 600VAC 90A BREAKER

Category: 600V Rated Molded Case Circuit Breakers

ABB's General purpose encapsulated open core, and coil transformer (also known as Type IP Control Power transformers) are ideally suited for industrial and light-duty loads, HVAC applications, signal and alarm systems, industrial control panels, lighting, and circuit isolation. The optional fuse block adapter kits enable input and output flexibility. Type IP Control Power transformers are an economical alternative to high in-rush/machine tool transformers.

Category: Up To 50 VA Industrial Control Transformers

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Conduit Outlet Box, Type GEMC, (2) 3/4 Inch Hubs, Cover Opening: 2-1/16 Inch, Cubic Inches: 8, Explosion-Proof, Dust-Ignitionproof, Aluminum

Category: Explosion-Proof C Conduit Outlet Boxes

Repair Coupling, 3-1/2 Inch Diameter, 12 Inch Length, Sleeve Type, No Internal Stop, PVC

Category: PVC Repair Couplings

Selector Handle, Red, Size 00, NEMA4/4x, (a,b&c Frame)

Category: Disconnect Switch Handles

Category 6 Performance, 28 AWG UTP patch cord with TX6Ö Modular Plugs on each end. Off White, 4 ft.

Category: Category 6 Patch Cords

Category 6 Performance, 28 AWG UTP patch cord with TX6Ö Modular Plugs on each end. Black, 4 ft.

Category: Category 6 Patch Cords

Circ-a-w R1048hc NEMA3r 400a busway

Category: Group Metering Main Terminal Boxes