"509"

3" x 2" Switch Box, Old Work, Plaster Ears, 2-1/2" Deep, End Knockouts: (2) 1/2", Bottom Knockouts: (2) 1/2", Steel

Category: Metallic Switch / Outlet Boxes

Through-The-Wall Fan, CFM: 200, Sones: 7.5, Duct Size: 8", Color: White, Includes: Built-In Damper

Category: Through-The-Wall Fans

Chase Nipple, 3 1/2 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

Beam Clamp, 10-24 Threaded Opening, Fits 15/16 Inch Flange, Malleable Iron

Category: Beam Clamps - Adjustable

Sensing-safti-gard Motor Controls, Voltage Rating: 120v, Amperage Rating: 15a, Motor Power: 3/4hp, Reset Type: On/off, Phase: 1, Operating Cycles: 50/60hz

Category: In-Line Field Attachable GFCI Devices

WER 50-9

CRT 509 ARMORED CABLE DISPENS

Heavy Duty Staple Gun Tacker, Uses 504, 505, 506, 508, 509, 50CT

Category: Staple Guns

Through-The-Wall Fan, CFM: 200, Sones: 7.5, Duct Size: 8", Color: White, Includes: Built-In Damper, Rotary Switch

Category: Through-The-Wall Fans

Old Work Bracket, 3" x 2", 1-Gang, Gangable, Square Corner Switch Box with Plaster Ears, Drawn, Metallic. Depth: 2-1/2". Side Knockouts: (6) 1/2" . Bottom Knockouts: (1) 1/2". Cubic Inches: 12.5". Set Back: 3/4".

Category: Metallic Switch / Outlet Boxes

Locknut Wrench Set Features Opposing Offset Bends Allowing For Access To Difficult To Reach Locknuts, Three Wrenches Included For Most Commonly Used Conduit Sizes, 1/2-Inch, 3/4-Inch And 1-Inch, Two Internal Magnets On Each Wrench Hold The Set Together For Easy Storage, The Slim Alloyed Steel Design Allows For Access When Space Is Limited, Each Wrench Is A Different Color And Marked To Easily Identify Size, Hooked Tip Latches On Locknut For Ultimate Turn Leverage, Steel Design Is Corrosive Resistant And Durable

Category: Combination Wrench Sets

3-Gang, Vertical Mount, Weatherproof Cover, Die Cast, Type: (3) Single Receptacle. Diameter: 1.406". Color: Gray.

Category: 3-Gang Metallic Weatherproof Box Covers

Chase Nipple, 3-1/2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Chase Nipples

T50 Flat Crown Staple, Length: 9/16", Width: 3/8", Standard Package: 1,250

Category: Staple Gun Staples

27 Amp, NEMA Size 1, Non-Combination, Non-Reversing Starter, Freedom, 3-Pole, 3-Phase Magnetic, Thermal Overload Relay, NEMA Type 1, Indoor, 240 VAC/ 60 Hz - 220 VAC/ 50 Hz Coil. Cover Control: Reset Button. Must Add Class 20 Heater Pack

Category: NEMA Size 1

Beam Clamp, Malleable, 1", 1-5/8" High, 1/4-20 Threads

Category: Beam Clamps - Adjustable

Eaton Freedom NEMA Motor Control Starter, 110V/50 Hz-120V/60 Hz, NEMA 3R, Non-Combination Non-Reversing Starter, NEMA Size 0

Category: NEMA Size 0

B30 Magnetic Non-Adhesive Printer Label, 25 FT L x 4-1/4 IN W, B-509 Polyester, White

Category: Labeling Tape

NEMA Freedom Starter, Non-combination, 3-phase Magnetic, Size 2, NEMA Type 1, Indoor, Includes Start/stop Pushbuttons

Category: NEMA Size 2

B30 Magnetic Non-Adhesive Printer Label, 25 FT L x 2-1/2 IN W, B-509 Polyester, White

Category: Labeling Tape

4 Pair / 24 AWG, CAT5e, Underground, Water Resistant, POWDER FILLED. Unshielded, Twisted-Pair, Outdoor, Sunlight Resistant, 100MHZ tested to 350MHZ, 300V, Jacket Diameter: 0.205", Color: Black, Reel Length: 1000 ft. ***Rated for use in Underground Conduit***

Category: Outdoor Rated Category Cable

Data / Voice Cable - 4 Pair / 23 AWG, CMR, CAT6, Riser, Non-Plenum, Unshielded, Twisted-Pair, Indoor, 250MHZ tested to 500MHZ,300V - Green - Reel in a Box Length: 1000 ft.

Category: Category 6 Non-Plenum Cable

BRA B30C-4250-509-YL

Category: Labeling Tape

BRA B30C-2500-509-YL

Category: Labeling Tape