"connector waterproof"

4 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: Single Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Pre-Insulated Service Entry Sleeves 2/0 - 2 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Category: Standard Barrel Aluminum Compression Sleeves

POLARIS INS MULTI-TAP 250 3 PORT DSE

Category: Dual Sided Entry Wire Connector Blocks

Dual Rated Aluminum Splice 2 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.

Category: Standard Barrel Aluminum Compression Sleeves

NSI ISPB-600-3 SUB 3PORT CONN POLARIS SUBMERSIBLE PEDESTAL CONNECTOR 3 PORT 600 MCM - 12 AWG

Category: Connector Blocks - Submersible - One Sided Wire Entry

Fork Terminal, 8 AWG, 1/4 Inch Stud, 600 Volt, Copper With Tin Plating

Category: Non-Insulated Block Fork Terminals

Easy-Twist Winged Twist-On Wire Connectors - Winged Red Large Jar 18-8 AWG APPLICATIONS: Easy-Twist Winged Twist-On Wire Connectors have deep surface ridges to provide better grip. Ergonomic, swept-back wing design provides handling comfort and increased torque ability. Flame retardant UL 94V-2 thermoplastic shell provides excellent electrical insulation. Fixed, precise square wire spring provides secure gripping of conductors. Deep skirt entry provides protection from flashover and shorts. Compact design ensures proper installation, especially in tight spaces. Threaded funnel entry guides the wires into the connector easily. Pre-twisting of wires is not necessary. Zinc-plated springs for low contact resistance. UL 486C Listed Wire Connector. For Copper Wire Only.

Category: Color Coded Twist On Wire Connectors

Offset Pin Terminal 3/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

NSI IT-750C 750-250 MCM POLAR

Category: Dual Sided Entry Wire Connector Blocks

Offset Pin Terminal 350 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

Offset Pin Terminal, Aluminum, Tin Plated, Yellow Color Coded, 750 MCM,1 Conductor, Plastisol Cover, 600V

Category: Aluminum Pigtail Adapters

Easy-Twist Standard Twist-On Wire Connectors - Standard Grey Small Jar 22-14 AWG APPLICATIONS: Easy-Twist Standard Twist-On Wire Connectors have a flame retardant UL 94V-2 thermoplastic shell that provides excellent electrical insulation. Their fixed, precise square wire spring provides secure gripping of conductors. Their deep skirt entry provides protection from flashover and shorts. Sure-grip ribs improve gripping comfort. Compact design ensures proper installation, especially in tight spaces. Threaded funnel entry guides the wires into the connector easily. Pre-twisting of wires is not necessary. Zinc-plated springs for low contact resistance. 1000V max in fixtures and signs. UL 486C Listed Wire Connector. For Copper Wire Only.

Category: Color Coded Wire Connectors

Solid Pin Terminal for Copper and Aluminum Conductors 1 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

Winged Easy-Twist Wire Connectors, Red, 1 Pack = 100 Pcs

Category: Color Coded Twist On Wire Connectors

Winged Wire Connector, Grounding, Easy Twist Connector, Green, Jar of 350

Category: Color Coded Twist On Wire Connectors

250 MCM - 6 AWG Bagged Polaris InsulatedIn-Line SpliceConnector Polaris Insulated In-Line Splice Connectors are suitable for connecting two wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: ln-Line Splicers/Reducers - Insulated

Easy-Twist Standard Twist-On Wire Connectors - Standard Red Fiber Drum 22-10 AWG- 25000 Count APPLICATIONS: Easy-Twist Standard Twist-On Wire Connectors have a flame retardant UL 94V-2 thermoplastic shell that provides excellent electrical insulation. They have a temperature rating of 221 degrees F (105 degrees C). Their fixed, precise square wire spring provides secure gripping of conductors. Their deep skirt entry provides protection from flashover and shorts. Sure-grip ribs improve gripping comfort. Compact design ensures proper installation - especially in tight spaces. Threaded funnel entry guides the wires into the connector easily. Pre-twisting of wires is not necessary. 1,000 volt maximum in fixtures and signs. UL 486C Listed Wire Connector. For Copper Wire Only.

Category: Color Coded Wire Connectors

insulation Piercing Connector 500-4/0 Main, 350-1/0 Tap

Category: Splices - Insulation Piercing

Winged Wire Connector, Grounding, Easy Twist Connector, Standard Jar of 100

Category: Color Coded Twist On Wire Connectors

Power Distribution Blocks, Connector Blocks Series, Line Side (2) 2/0 - 14 AWG, Load Side (6) 2 - 14 AWG, 350 Amps Per Pole

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Cable Connector Block Replacement Sleeves for ITOG-3/0

Category: Copper Crimp Connectors

Winged Wire Connector, Green, Grounding, Easy Twist Connector, Fibre Drum Of 25,000

Category: Color Coded Twist On Wire Connectors