"ab-66jp the austin co."

National Electrical Manufacturers Association (NEMA) Recommends Use Of Mr. Ouchlabels On Transformers Located In Public Areas. Our Transformer Markers Meet The NEMA Standard As Well As Underwriters Laboratory Performance Standard #969. Markers Are Made

Category: Shock Hazard Labels

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Power Distribution Box, NEMA 3R Enclosure, Sled Base. Includes: (1) California Style Twist-Lock 50A 125/250V Power Inlet, (1) California Style Twist-Lock 50A 125/250V Power Outlet, (1) 30A 250V L6-30R Power Outlet and (6) 20A 125V L5-20R Power Outlets.

Category: Temporary Power Distribution Boxes

Sealing Gasket, Trade Size: 3-1/2 Inch, Material: Steel Backed Neoprene, Standard: Csa C22.2 No. 18.3, Csa 065178, Nema Fb-1, For Liquidtight Flexible Metal Conduit

Category: Liquidtight Connectors - Accessories

B100 Series, NEMA 1 Enclosed, Pushbutton Operator, Manual Motor Starter. Provides Manual Control and Overload Protection, Includes a 3-Pole BiMetallic Overload Relay, Field Mounted Auxiliary Contacts, Lockout Device Standard, 3-Pole, Frame Size M-1. 2 Hp @ 120V AC 1-Phase, 3 Hp @ 240V AC 1-Phase. 7.5 Hp @ 230V AC 3-Phase, 10 Hp @ 575V AC 3-Phase. Heater Unit Not Included; uses the FH Series.

Category: Enclosed Manual Starters / Switches

Battery Module, SDU Series, Chassis Mount, NEMA 1, HxWxD: 11.5: x 5.57" x 4.57". Includes: 6 ft Battery Cable. Up to (4) of these Battery Modules can be used with the SDU Series DC Voltage UPS.

Category: Uninterruptable Power Supply Batteries

Industrical Control Transformer, 3PH 225KVA 480-240 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated.

Category: 225 - 300 KVA Dry Type Transformers

A rigid steel pedestal with die-cast legs and mounting holes for bolting to the floor or casters. This Pedestal with Legs, AP36L44LG item measures 36.00x4.00x4.00 inches with a material of Steel colored Lt Gray.

Category: Industrial Consolet Pedestals

In-Line Fuseholder, 2-Pole, For 13/32" x 1-1/2" Fuses, 30A, 600V, Copper Crimp Terminals for (1) #12 to #8 or (2) #12 wires, (2) #10, (1) #6 to #4

Category: In-Line Fuse Holders

LEV 7B101-S02 1PH2W 120V LCD, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Submeters

CUT MBT48P200BTS TRAILER PANEL METER BREAKER, BR, 4/8 DIST, with Feed Through Lugs, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Eaton meter socket, Multi position resi service, 200A, Over/under, 5x5 inch hub open, #6-350 kcmil, 4-jaw, 1-ph, #8-250 kcmil, Horn bypass, Gnd conn (#14-#2 Cu), Triplex, 3-wire, Ringless, 600 Vac, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Face Plate and Trim Accessory for the 4DD or 6DD LED Driver + Dimmer, Almond

Category: 1-Gang Decorator Wallplates

C-H QC1035 35A SP CKT BRK

Category: 1-Pole Cable-In / Cable-Out Circuit Breakers

C-H UGHTRS111CCH METER SOCKET, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle, 33"L (83

Category: Non-Releasable Cable Ties

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in blue nylon and has a funnel entry with insulation support. It has a tab size of 0.205/0.187 x 0.032" (5.2/4.8 x 0.8 mm) and supports

Category: Female Nylon Insulated Wire Disconnects

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 37"L (940mm), 0.5" (13mm), Tensile Strength: 2979

Category: Non-Releasable Cable Ties

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Black, 2 meters.

Category: Category 6 Patch Cords

Braided Expandable Sleeving, 0.50" diameter (12.7mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, white, Flame Retardant, Polyethylene Terephthalate, 500 ft. per reel

Category: Braided Expandable Sleeving

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Yellow, 3 meters.

Category: Category 6 Patch Cords

Super-Grip® Cable Ties are designed with high strength and flexibility to tightly grip bundles and resist lateral movement despite the rough conditions of MRO and construction environments. Plus, with weather-resistant Nylon 6.6 material, it's ideal for i

Category: Non-Releasable Cable Ties

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Red, 10 meters.

Category: Category 6 Patch Cords