"ab-242412sb the austin co."

C-H XTCR080F11T XT IEC FVR CO

C-H XTCC020C11N XT IEC CAPACI

LED Lamp: UL Type B (bypass the ballast); 14.5 Watt, 120-277 Volt, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 2100, Beam Angle: 180, CRI: 82, Color Temperature: 5000K, Rated Life: Up to 50,000 Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (must shunt). OC# 575548, 12NC 929002325734, Product Name: 14.5T8/MAS/48-850/MF21/P 10/1.

Category: T8 Tubular LED Lamps

H412 3/4-AS/FS-GW Small Hydronic Heater uses the energy from a building’s hot water source. In-wall, Fan-Driven, Zone-Controlled Heat

Category: All Area Fan Forced Heaters

Spud Wrench Holder With Two Separate Loops For Carrying Multiple Spud Wrenches At A Time, Tucked Tunnel Loop Design Keeps Tools Tight To Belt And Accommodates Up To 3-Inch (7.6 Cm) Wide Belts, Durable, Full-Grain Russet Leather, Compatible With Klein Tools Tension Straps (Cat No. 5890) To Secure Spud Wrench Holder In Place On Tool Belt, Made In The Usa With Global Components, Brass Rivets With Washer Backing For Extreme Durability, Heavy-Duty Leather For Long Life

Category: Tool Holders

1024X1-12 SPANNER TAMPER PROO F MACHINE SCREW

Category: Spanner Tamper Proof Machine Screws

Battery-Operated Crimper, O+ Die Head, 4 Ah, Crimps Up To 600 MCM Copper, 350 MCM Aluminum And 477 ACSR Cable, 7 Ton Hydraulic Force Crimps A Larger Capacity Faster Than Similar Models On The Market, Green Light Indicator Confirms A Good Crimp Has Been Made, Two Work Lights Illuminate Darker Spaces, Replacement Blades Available, Powered By DeWALT 20V Lithium-Ion Batteries (4 Ah), Compatible With Industry Standard W-Style Dies, Includes Tool, O Fixed Die/D3 Groove Crimping Jaw, Two 4 Ah Batteries, Charger & Bag

Category: Cordless Crimpers

Replacement Face Shield Lens Has Superior Impact Protection And Is Tested To The Latest Ansi Z87.1+ (2020), Csa Z94.3-20 Standards, Designed With Lightweight Materials And Proper Balance To Reduce Neck Fatigue, Optical Class-1 Lens Tested For Minimal Distortion, Ensuring Uncompromised Vision With High Clarity, Wide Lens, Full Face, Wrap-Around Design To Match And Maintain Low Profile For Proper Coverage, Premium Anti-Fog, Uv And Durable Scratch Resistant Coatings For Use In Variety Of Demanding Environments, Replacement Lens For 60528 And 60529 (Note: Cat. No. 60475 Replacement Frame Sold Separately)

Category: Hard Hat Liners

Brady Has Super-tough Smear-proof Ribbons Assure Your Printed Text Lasts For Years Outdoors And In An Industrial Environment. Ribbons Ship Self-contained In Cartridges That Drop Straight In To The Globalmarkprinter With A Click. Patent D481,7555

Category: Label Printer Ribbons

Installation tool for use with the following stainless steel cross section ties:Type MLT: Standard, light-heavy, heavy and extra-heavyType MLTFC: Standard, heavy and extra-heavyType MLTC and MLT-LPAL: HeavyType MLTD: Heavy and extra-heavyUsed with custom

Category: Cable Tie Tools

Switch Box, 1-Device, 3-1/2 Inch Deep, Cubic Inches: 22.0, Mounts Directly to Steel or Wood Stud, Non-Metallic

Category: Non-Metallic Through The Wall Switch / Outlet Boxes

Replacement Glo Stix, Length: 5', Compatible With: Greenlee Glo Stix Kit 540-15, 540-6, or 540-18, Material: 3/16" Diameter Luminescent Fiberglass Rods

Category: Glow-In-The-Dark Fish Poles / Rods

Y’ Conduit Adapter for FBBOX-GY Concrete Floor Box, Used To Split Power Conduit 2 Ways ***This Product Is Sold Separately From The FBBOX-GY System***

Category: Recessed Box Adapters

Polyester Labels For The Bmp?21 Mobile Printer & Lab Pal™ Label Printer.black Ribbon On White Tape.

Category: Permanent Tapes

Soft Starter, 360 A, U-frame, Three-pole, 24 V power, 200 - 600 Volt operating voltage, 47-63 Hz, 1-2 conductors, # 4 AWG to 500 kcmil wire, 120 Volt DC, 240 Volt AC, Modbus RTU, NEMA 0, LCD display, -30°C to -50°C

Category: Advanced Control Softstarters

4" Housing Pack, For Use With NuTone 763F Fan Finish Packs To Complete The Installation, Housing Dimensions L x W x D: 8-1/4" x 8" x 5-3/4"

Category: Fan Housing / Finish Packs

Braided Expandable Sleeving, 1.25" diameter (31.8mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 50 ft. per reel.

Category: Braided Expandable Sleeving

Bradybondz™ Labels For The Tls 2200& Tls-pc Link™ Thermal Transfer Portable Printers. Please Note: This Material Is Ul & Csa Approved With Its Respective Ribbon. See The Recommended Ribbon Series For The Appropriate Ribbon To Use.

Category: Permanent Labels

Labels For The Tls 2200& Tls-pc Link™ Thermal Transfer Portable Printers.please Note: This Material Is Ul, Csa & Aga Approved With Its Respective Ribbon.see The Recommended Ribbon Series For The Appropriate Ribbon To Use.

Category: Permanent Labels

Bradybondz™ Labels For The Tls 2200& Tls-pc Link™ Thermal Transfer Portable Printers. Please Note: This Material Is Ul, Csa & Aga Approved With Itsrespective Ribbon. See The Recommended Ribbon Series For The Appropriate Ribbonto Use.

Category: Self-Laminating Labels

LED MR8 12/18V AC 12/24V DC 2.5W 3000K 80°

Category: R-Type Reflective LED Lamps

LEDBarKit-Internal Driver (PRO Series) Light Bar: Length: 43.3", Specialty LED fixture with LED diodes which make the bar shine Violet (VLT).

Category: LED - Strip Fixtures

3" ProPEX® Expansion Head, Compatible with the M18™ FORCE LOGIC™ 2"-3" ProPEX® Expansion Tool, Black Oxide Coated for Weather and Corrosion Resistance, Color Coded Rings and Large Size ID Markings for Easy Selection ***Tool Sold Separately***

Category: Cordless Expansion Tools

2-1/2" ProPEX® Expansion Head, Compatible with the M18™ FORCE LOGIC™ 2"-3" ProPEX® Expansion Tool, Black Oxide Coated for Weather and Corrosion Resistance, Color Coded Rings and Large Size ID Markings for Easy Selection

Category: Cordless Expansion Tools