"nm2048-2 co"

Available in 5' [1.5m] length with 9" spacing. 15A tamper-resistant receptacles. 3-wire, #12 USB Plugmold THHN (1 hot, 1 neutral and insulated ground conductor). .040" [1.0 mm] aluminum housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. USB is 2.4 Amps (shared between two ports) 5VDC. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Tamper Proof Plugmold

W-mold G20gba609 Gry 4w2ckt P lugmld

Category: Single Circuit Steel Plugmold

Unit includes one (1) 20A black tamper-resistant duplex receptacle with two (2) USB ports that provide 3.1A. Unit comes with a 6' [1.83m] cord. Comes with a brushed stainless steel finish.

Category: Assembled Recessed Countertop Boxes

Unit complete with link straps, adapter plate and features concentric screw plugs that allow for 1 1/4" or 2" trade size conduit fitting connection. Gray

Category: Round Recessed Box Covers

Six outlets. Rugged white aluminum housing. 15' (4.6m) 14/3 SJT white cord with NEMA5-15 plug. Length 13 1/4" (337mm). Receptacle center-to-center 1 1/2" (38mm). Snap-on, slide-off mounting. Not for use in critical care enviornments. NOTE: Not for use where Article 517 of NEC requires Hospital Grade Outlets.

Category: Medical Grade Power Strips

Plug-In Outlet Center Unit, Length: 13 Inch, Width: 3-1/2 Inch, 6' Cord, 8 Individually Switched Outlets, Lighted On/Off Switch.

Category: Commercial Grade Power Strips

Ratchet-Pro 881 Series Multiple Service Floor Box Cover Kit, For 881 PVC Floor Box, Kit Complete With Prewired 20 Amp Duplex Receptacle (Receptacle Can Be Wired As Standard Receptacle or Isolated Ground), Flange And Slide Holder, 881ADP Adapter, and 881DIV Divider, Provided with Wiremold CM Series Open System Unloaded Adapters, Ortronics Series II and TracJack Adapters, Modular Jacks Sold Separately, CAUTION: Not For Use On Concrete Pours Less Than 4 1/2'' (114mm) Deep, Not For Use When Concrete Is The Finished Floor, Use Only For Tile, Carpet, Or Wood Covered Floors

Category: Round Recessed Box Covers

Floor Box Assembly, 1-Gang, Nickel. Includes 106 Adapter with Four Openings and (2) Screw Plugs

Category: Assembled Recessed Gang Boxes

WMD ULBH4-15 15A NON PATIENT

Category: General Duty Power Strips

Non-Metallic, Tee Fitting, 2900 Series. Size: 1-15/16" Length, 5-1/2" Width. PVC, Fog White. Maintains 1 1/4" [32mm] Bend Radius When Installing UTP and Fiber Optic Cable.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Six rear 20A outlets, on/off switch, 6' [1.8m] cord. Receptacle center-to-center 1 1/2" [38mm].

Category: General Duty Power Strips

Two front, four rear outlets, lighted switch, 15A, 15' [4.6m] cord. Receptacle center-to-center 1 1/2".

Category: General Duty Power Strips

Unit is 18 3/32" [461.2 mm] and has one 15A gray duplex and two communication openings with adapter for Ortronics TracJack & Series II or Wiremold open system.

Category: Work Surface Power Centers

Available in 5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] aluminum housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.

Category: Dual Circuit Steel Plugmold

Legs allow floor box to be adjusted up or down to match the dsired pour height of the concrete. Includes two (2) leveling legs. Threaded rod not supplied.

Category: Recessed Floor Box Service Dividers

50' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Black

Category: Non-Metallic Overfloor Raceway

Connects end of 3000 Series Raceway to 1 1/2" trade size conduit or armored cable.

Category: Metallic Raceway Connectors & Adapters

Cover assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color black

Category: Poke-Through Cover Assemblies

Drop-in rubber grommet for pass-through cabling. Set of two grommets (one grommet shown) in black.

Category: Assembled Poke-Through Units

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

W-mold G20gba612 Gry 4w2ckt plugmld

Category: Single Circuit Steel Plugmold

Accepts standard 15A and 20A duplex receptacles. NOTE: Standard size for device plates for Plate Location 3 is 5 7/32" (132mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates

WMD FPB-2RT DBL GANG PLATE W/

Category: Poke-Through Mounting Plates