"iml-110-1"

Permaground Bronze Ground Rod Clamp, Conductor Range 1/0-8, Ground Rod Size 3/4in, Direct Bury

Category: Ground Rod Ground Clamps

Wallplate Insert, Decorator, Cable Entrance Hood, Reversible, White.

Category: Cable Access Wallplate Inserts

TMC2 Connectors for MC Cable, NPT Size: 1/2", Cable Armor Diameter: 0.42" - 0.63", Cable Jacket Diameter: 0.50" - 0.75", Material: Nickel Plated Brass. Watertight, Class I, Division 2, 4X and IP66.

Category: Single Barrel MC / AC Connectors

1-1/4" Diameter, Rain Proof Bolt-On Hub. Used with Flush Mount Applications.

Category: Load Center Hub Covers & Adapters

Weatherproof Cover, 1-Gang, Vertical Mount, Non-Metallic, Decorator/GFCI Receptacle, Gray

Category: 1-Gang Non-Metallic Weatherproof Box Covers

1/0 AWG Bare Stranded Copper Wire, 1000 Ft. Length

Category: Bare Stranded Copper Wire

1 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range .78 to 1.12.

Category: Single Barrel MC / AC Connectors

Eaton B-Line series box support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.049lbs, Length A: 2.5", Box support, Long leg box support, Pre-galvanized

Category: Metallic Box Supports

Non-Metallic, 1-Gang, Sure Snap Device Box, NM2000 Series. Size: 4-3/4" Length, 3" Width, 1-3/4" Depth. PVC, White.

Category: Plugmold Device Boxes

Terminal Adapter, 3-1/2 Inch Diameter, PVC

Category: PVC Male Terminal Adapters

Eaton B-Line series springless channel nut, 0.25"Hx1.3750"Lx0.85"W, Steel, Electro-plated, 3/8”-16 bolt size, 250 lbs load, 300 lbs load

Category: Strut Channel Nuts

Hammer-Drill Bit, Carbide, 4-Cutter, Length: 23", Diameter: 1-1/4", Shank: SDS.-Max.

Category: SDS Max Masonry Bits

Front Auxiliary Contact with 1 N.O. & 1 N.C. Contacts. Used with Sequence A, Frame D-G IEC Contactors.

Category: Starter & Contactor Auxiliary Contacts

FDCS Device Box, 1-Gang, Stainless Steel Ridge Top, Cast Box, (2) 3/4 Inch Hubs, Top and Bottom, Box Depth: 2-1/2 Inch, Cubic Inches: 25, Includes: Internal Ground Screw. For Use with Threaded Rigid Metal Conduit.

Category: 1-Gang Stainless Steel FS & FD Device Boxes

Digital Level with Programmable Angles, Digital Level Measures 0 To 90-Degree, 0 To 180-Degree, Or Dual Axis Bullseye Ranges, Pre-Programmed Commonly Used Target Pitches For Efficiency & Ease-Of Use: 1/8-Inch, 1/4-Inch, 3/8-Inch & 1/2-Inch Per Foot, Easily Achieve Target Angle By Setting An Audible Alarm; LCD Will Change Color As A Visual Indicator Of Reaching The Set Target Angle, Includes: Soft Carrying Case, Instruction Manual & Batteries

Category: Levels

Type QCR 1/2-inch Quicklag Industrial Thermal-Magnetic Circuit Breaker, Single-Pole, Tray Pack - 150, 15A, 10 kAIC, Rear mounting

Category: Residential 1-Pole Circuit Breakers

Conduit Body, Iron, 1-1/2 Inch Hub, 9.4 Inch Length, 6 Inch Width

Category: Type X Iron Conduit Bodies

Eaton Crouse-Hinds series Condulet Form 7 cover, Sheet aluminum, 1-1/4"

Category: Aluminum Conduit Body Covers

Liquidtight Sealing Gasket, 1/2 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Heat Shrink Tubing, 4' Long Stick, 2:1 Shrink Ratio, 1/4", 6.4/3.2 Dia, PO, Red

Category: Heavy Wall Heat Shrink

EMT Compression Connector, 3 1/2 inch, Material: Steel

Category: Steel Concrete Tight EMT Compression Connectors

150 Amp Standard Meter Center, Ring Style, 4 Jaws, 1-Phase, 120/240V, 10 kAIC, 4/8 Distribution, Main Breaker Included BWH2150, BR Type Branch Breakers, OH/UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount. Includes: Feed-Through Lugs and Provison for Secondary Main Breaker (BR, BRH, BRHH, 70 Amp Max)

Category: Meter Mains - with Distribution

1-5/16 Inch Japanese Tooth Hardwood Oscillating Blade

Category: Oscillating Saw Blades

Hole Saw, Bi-Metal, Diameter: 4-1/4" Arbor not included

Category: Bi-Metal Hole Saws