"200 series"

Non-Metallic, 1-Gang, Extra Deep Device Box, NM2000 Series. Size: 4-3/4" Length, 3" Width, 2-3/4" Depth. PVC, Fog White.

Category: Plugmold Device Boxes

Non-Metallic, Flush Dual RJ11/RJ45 Connector Faceplate, 5500 Series. Size: 4-1/4" Length, 1-7/8" Length. PVC, Light Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

PN 3 Series External Elbow. For right angle turns around external corners. Finish - Fog White

Category: 1-Piece Non-Metallic Raceway Elbows

Takeoff Connector. For 90 degree tee connection at any point along a run of 6000 Series Raceway. Finish - Ivory

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, Right End Cap, 5000 Series. Size: 5-29/32" Length, 1-3/16" Width, 5/16" Depth. PVC, Black.

Category: 2-Piece Non-Metallic Raceway End Fittings

W-mold 421 Mudcap For Pro Ser ies

Category: Recessed Compartment Boxes

Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE:

Category: Poke-Through Cover Assemblies

Steel, Plugmold Multioutlet Strip, 2400PM Series, Single-Channel, 4 Duplex Receptacle, Size: 6' Length, GBA Finish Color: Ivory.

Category: Dual Circuit Steel Plugmold

For installation requiring a GFCI or surge suppression receptacle and accepts three (3) Wiremold CM2 Series communication connectivity devices. Cover includes 6A mini adapter (6A-opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

For use in concrete floors. For use with round Evolution Series cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately.

Category: Square Recessed Floor Boxes

FiberReady divided fitting to feed 40N2 Series Raceway. Includes 3/4", 1", 1 1/4", and 1 1/2" trade size Kos on back and top. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Steel, Power/Data Pole, Color: Gray, 10' 5", (2) Duplex Outlets, 20A, 125V, (1) Dedicated/Isolated & (1) Standard Outlet, Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

Non-Metallic, Pancake Overfloor Raceway. 1400 Series. Size: 10' Length, 3" Width, 20/32" Height. Color: Gray.

Category: Non-Metallic Overfloor Raceway

Non-Metallic, Vertical Wall Box Adapter, NM2000 Series. Size: 4-1/2" Length, 2-3/4" Width. Ivory.

Category: Plugmold Clips, Couplings, & Adapters

Non-Metallic, Horizontal Wall Box Adaptor, NM2000 Series. Size: 4-1/2" Length, 2-3/4" Width. Ivory.

Category: Plugmold Clips, Couplings, & Adapters

Brass Conversion Kit Which Includes One 825a-3/4 3/4" (19.1mm) Diameter Plug,one 825c-3/4, One 825l, And One 825n. For Carpet Or Tile Installations.

Category: Round Recessed Box Covers

When using any of the 862 Series Floor Boxes in a concrete floor, this kit will provide a mud cap for the concrete pour, two 3/4" trade size conduit hubs, and a scrub water gasket. Not needed for wood floor installations.

Category: Recessed Floor Box Tools

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Compartment Boxes

For transitioning from MXN2A08 Corner Drop to a horizontal run of 5400TB Series Raceway to the left. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

For dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

2" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

For AC8850 Box. Includes one (1) Wiremold CM Series Open System adapter. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway