"200 series"

Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE:

Category: Poke-Through Cover Assemblies

Steel, Plugmold Multioutlet Strip, 2400PM Series, Single-Channel, 4 Duplex Receptacle, Size: 6' Length, GBA Finish Color: Ivory.

Category: Dual Circuit Steel Plugmold

For installation requiring a GFCI or surge suppression receptacle and accepts three (3) Wiremold CM2 Series communication connectivity devices. Cover includes 6A mini adapter (6A-opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

FiberReady divided fitting to feed 40N2 Series Raceway. Includes 3/4", 1", 1 1/4", and 1 1/2" trade size Kos on back and top. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Steel, Power/Data Pole, Color: Gray, 10' 5", (2) Duplex Outlets, 20A, 125V, (1) Dedicated/Isolated & (1) Standard Outlet, Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

Non-Metallic, Pancake Overfloor Raceway. 1400 Series. Size: 10' Length, 3" Width, 20/32" Height. Color: Gray.

Category: Non-Metallic Overfloor Raceway

Floor Box Cover Kit, Rachet-Pro 881 Series, Single Service. Includes: 15A Quad Receptacle, Flange, 881ADP Adaptor, 881DIV Divider. Use with Tile, Carpet, Wood Floors. Color: Aluminum.

Category: Round Recessed Box Covers

Non-Metallic, External Elbow, PN05 Series. Size: 3-1/8" Length. PVC, Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Connects a vertical run of AL5200 Series Raceway with a horizontal overhead run with its cover facing up.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

For mounting two AMP NETCONNECT SL Series devices. Ivory

Category: Keystone Modules For Metallic Raceway

Hold up to five (5) devices for power, communications or audio/video. Bracket accepts EFB10 Series device plates (2 1/32" x 4 5/8") (58mm x 117mm) device plates sold separately.

Category: Recessed Floor Box Service Fittings

Non-Metallic, Pancake Overfloor Raceway. 1400 Series. Size: 5' Length, 3" Width, 20/32" Height. Color: Gray.

Category: Non-Metallic Overfloor Raceway

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Flush, Material/Finish: Die-Cast Aluminum/Bronze Powder-Coat.

Category: Poke-Through Cover Assemblies

Used as a vertical corner feed drop to horizontal run of 5400 Series Raceways. Two compartments. Packaged with base and cover. MXN2A08 available in 8' (2.44m) lengths. Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Non-Metallic, Left End Cap, 5000 Series. Size: 5-29/32" Length, 1-3/16" Width, 5/16" Depth. PVC, Black.

Category: 2-Piece Non-Metallic Raceway End Fittings

Non-Metallic, Prewired Plugmold, Length: 6 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (6) 15A, 125V: 2-Circuit, Duplex Outlets.

Category: Single Circuit Non-Metallic Plugmold

6" Round, Furniture Feed Cover Assembly, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4", (1) 2 to 1-1/4". Material/Finish: Aluminum/Brass Powder-Coat, For Tile, Carpet and Wood Flooring. Includes: (1) 3/4" Conduit Connector, (1) 1-1/4" Conduit Connector and (1) Service Divider. Caution: Not for Use on Concrete Pours Less Than 4 1/2"; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

Non-Metallic, Flexible Corduct. 1400 Series. Size: 5' Length, 3" Width, 20/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway

For 30TP-2V / 30TC-2V and 30TP-4V / 30TC-4V Series. 12" (305mm) long. Communication covers for additional voice/data connectors. Each cover includes Kos for four RJ11/RJ45 connectors (.760" x .576" (19.3mm x 14.6mm)), mouse hole for exiting communication cables (grommet furnished).

Category: Power Pole Plates

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

FiberReady divided fitting to feed 40N2 Series Raceway. Includes 3/4", 1", 1 1/4", and 1 1/2" trade size Kos on back and top. White

Category: 2-Piece Non-Metallic Raceway End Fittings

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Gray

Category: Poke-Through Cover Assemblies