"fv-wcsw21-a"

LED T8 Type A/B Lamp: 3' T8, 12W, 1500Lm, 120-277v, 82CRI, Hybrid Direct (A) & Bypass (B) - Single/Double Ended Connection. Color (CCT) Selectable: 3500-4000-5000K. 0-10V Dimming (Dimming is dependent on the ballast in Type A applications). Halco p/n 87101: 36T8-12-8CS-HYB-D-LED.

Category: T8 Tubular LED Lamps

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 percent and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Category: DIN Mount Uninterruptable Power Supplies

Softstarter PSTX105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard, lugs built in, good for up to 2/0

Category: Advanced Control Softstarters

MERV 13 Replacement Filter, For Intelli-Balance® Elite and Elite Plus EVRs (1=1 Filter)

Category: Replacement Fan Filters

6IN VTX SERIES INLINE BLOWER FAN - CENTRIFUGAL 257 CFM @ .2IN SP

Category: In-Line Fans

Transfer Register Box, CFM: 60, Sones: <0.3, 4" X 10" Opening, Fan Sold Separately

Category: Fan / Light Units

Diva Smart Dimmer Switch Kit For The Caséta System, With Smart Hub And Pico Remote, Works With 150 W LED Bulbs Or 600W Incandescent Bulbs, Does Not Require Neutral Wire, Tap Buttons For Full On/Off; Adjust Slider To Dim Or Brighten Light Level, Preset Allows You To Turn Your Lights On To Your Preferred Predetermined Level, Soft-Glow Light Bar Provides Easy And Precise Dimming Control, Add A 2nd Switch Anywhere By Pairing With Included Mountable Pico Remote, Use With A Mechanical Switch To Create A 3-Way Application, Smart Hub Allows Caséta To Connect With Alexa, Apple Home, The Google Assistant, Ring, Serena Shades, SONOS, And More, Control At The Wall, With A Pico Smart Remote, Or With A Phone

Category: Wired Smart Devices

Pic-A-Watt Series Wall Heater, 240V, 500, 750, 1000, 1250, 1500, 1750, 2250 Watts, 2.4 - 10.8 Amps, Color: White, ***Interior and Grill Only (No Wall Can)***

Category: Heater Interiors

LED T8, UL Type A/B: Works as either a Plug-And-Play (UL Type A) or Ballast Bypass (UL Type B); 4ft., 15W, Up to 2200lm, 120-277V, Selectable Color Temperature: 3000K/3500K/4000K/5000K/6500K, Satco S21763: Product; 15T8/LED/48-5CCT/DM/BP-DR.

Category: T8 Tubular LED Lamps

Liquidtight Sealing Gasket, 2 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Cushion-Grip™ Pass Through Screwdriver Handle Receives Knect™ (M) Sockets Or Adapters, 1/4-Inch Socket Doubles As A Standard 1/4-Inch Bit Holder, Pass Through 90-Tooth Socket Wrench For Driving Hex Nuts On Threaded Rod And Requires Only 4 Degrees Of Swing For Ease Of Use In Tight Space With A 20-Percent Improvement Over 72-Tooth Ratchets, Socket Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch And 8 Mm, 10 Mm, 11 Mm, 12 Mm, 13 Mm, 14 Mm, 15 Mm, 17 Mm, 18 Mm; Bits: Ph #1, #2 , T20, T25 Torx® , 5/16-Inch Slotted, Klein Knect™ (M) Specialized 1/4-Inch Flip Socket Adapter Compatible With Klein Tools Pass Through Socket Wrench And Any 3/8-Inch Square Drive Ratchet, 1/4-Inch Magnetic Socket Doubles As A Standard 1/4-Inch Bit Holder, Compact, Modular Storage System With A Clear Lid Is Compatible With Modbox™ And Stackable With Other Cases Of Similar Design, Backwards Compatible With Standard 1/4, 3/8 And 1/2-Inch Drive Sockets With The Included Knect™ Adapters

Category: Sockets & Socket Sets

Intelli-Balance® Elite Plus+ ERV – Any Climate, 30-150 CFM

Category: Ceiling / Wall Fans

14155W-UL - This enclosure is made of 16-gauge zinc-coated fabricated steel with a hinged door and a 18-gauge zinc-coated fabricated steel body. Both are powder coated with a tan finish. This surface mounted service box is fully enclosed. It also includes a 3/4? plywood backboard for easy mounting of low-voltage utility equipment. The BN14155W-UL is UL listed (UL1863) and designed to NEMA 3R Specifications. The reinforced hinged door fastens with a standard 7/16? box or socket wrench. This box has “Communication” embossed on the lid. This enclosure is nailed or screwed to an existing surface. This enclosure includes 2 knockout 2? to 2-1/2? (for 1-3/4? to 2-1/4? conduit) and 3 knockouts 1-3/8? ( for 1-1/4? conduit). This exterior surface mounted enclosure is specifically designed to house utility/security/home audio-video wiring demarcation devices.

Category: Outdoor Surface Mount Data, Audio, & Video Enclosures

LED Bollard Retrofit: 18W, 120-277V, Flex Color: Default setting is 4000K (2560lm) but can be changed to 3000K (2450lm) or 5000K (2610lm) with a flip of a switch. Up to 100W HID Equivalent. EX39 (Mogul Screw Exclusionary Base). Multi-directional mounting capability & 360° design. Use base down, base up or base sideways without affecting performance. 8039D models dim to 50% by selecting “LO” on the switch located on the side of the lamp only. Operating Temp: -40°F to 122F°. Light Efficient Design p/n: LED-8039M345D-A

Category: Post Top / Site / Wall Pack LED Lamps

LED Bollard Retrofit: Ballast Bypass - UL Type B with FlexColor; 18W, 120-277V. Default setting is 4000K (2560lm), but can be changed to 3000K (2450lm) or 5000K (2610lm) with a flip of a switch. Dim to 50% by selecting “LO” on the switch located on the side of the lamp only. Up to 100W HID Equivalent. Multi-directional mounting capability & 360° design. Use base down, base up or base sideways without affecting performance.

Category: Post Top / Site / Wall Pack LED Lamps

Liquidtight Sealing Gasket, 1 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

The 120 V 50/60 Hz. 1800 Watt "T" Stem Mounting The K4100 & K4400 Series Photo Controls feature stem mounting, thermal-type, controls with single and multi-voltage models. Thermal-type photo controls provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights, and lighting. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bimetal and composite resistor for reliable long life operation over ambient temperature extremes. These models are California Title 24 compliant.

Category: Stem Mounted Photo Controls

Klein Tools Tape Measures deliver performance and durability expected by professional tradespeople. Safeguarded by a thick and durable protective nylon-coating, the Tough Blade stands out to 13-Foot. Able to endure the toughest of jobsite conditions, this tool also features a strong magnetic double hook, easy-to-read bold lines, and a retraction brake.

Category: Tape Measures & Rulers

LED Type A+B PL Lamp with FLEXCOLOR: Operates on existing magnetic ballasts or 120-277 VAC, 9 Watt, Color Temperature: 2700K/3000K/3500K/4000K, 1104-1243 Lumens (depending on color selected), Base: G24d

Category: LED Retrofit For Compact Fluorescent Lamps

Liquidtight Sealing Gasket, 3/4 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Air Conditioning Disconnect, Pullout, Fused, 30 AMP, 2-Pole, 120/240 VAC, Metallic, Galvanized Steel Enclosure, NEMA 3R. Uses: FLNR Series Fuses. Enclosure Dims: H: 8.70", W: 5.40", D: 3.15".

Category: Metallic Pullout Type Air Conditioner Disconnect Switches

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

Nightglow LED Night Light Module, Specialized Photocell automatically turns on the 1W LED Night Light with Automatic 20 min Delay-Off Timer.

Category: Fan Modules

Liquidtight Connector, 1 Inch, Straight, Zinc Electroplated Steel

Category: Straight Steel Liquidtight Flex Connectors