"322-013 emerson professional tools llc"

Auger, Shorty, Nail Eater II, Length: 7-5/8", Diameter: 1", Hex Shank: 7/16"

Category: Short Ship Auger Bits

1" EMT, 3/4" Rigid Conduit Bender with Handle, SITE-RITE Hand Bender, Weight: 11 lbs

Category: Hand Benders

2" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 25 feet Coil.

Category: Flexible Steel Conduit

2-Gang, Weatherproof Box, Non-Metallic, Type 2FSE, (1) 3/4" Outlet (1 in one end). Cubic Inches: 32". Color: Gray. Includes Mounting Feet

Category: 2-Gang Non-Metallic Weatherproof Boxes

3/4" EMT, 1/2" Rigid Conduit Bender with Handle, SITE-RITE Hand Bender, Weight 64 lbs

Category: Hand Benders

1-1/2" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 25 feet Coil.

Category: Flexible Steel Conduit

Combo Drill/Tap Bit, Size: 12-24NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Punch Kit, Slug Buster Knockout, Diameter: 089", 170", 136", 115" & 112, Conduit Size: 1/2", 3/4", 1" & 1-1/4"

Category: Knockout Kits - Manual

68 Piece Electrician's Drill/Driver Kit, Includes High Speed Titanium Coated Drill Bit Set, Masonry Drill Bit Set, Magnetic Nut Driver Set, Quick Change Chuck, Magnetic Bit Extension, Security Driver Bit Set, Total Pieces 68

Category: Drill / Power / Insert Bit Kits

Replacement Draw Stud, Length: 1-5/8", Diameter: 3/8"

Category: Knockout Punches

3/8 Inch Liquidtight Steel Flex, UL Listed, Type UA, Steel Core, PVC Jacket, Gray, 100 Foot Coil, Integral Bonding Strip

Category: Liquidtight Flexible Metallic Conduit

Cable Protector, Features: Fits Into Conduit to Shield Cable Being Fed Through & Nylon Construction Resists Abrasion, Conduit Capacity: 2" to 2 1/2"

Category: Cable Pulling Protector

Offset Bender, Capacity: 3/4" EMT, Weight: 8.5 lbs

Category: Offset Conduit Benders

12/3 Copper Conductors with Ground, 600V, Interlocked Aluminum Armor, Stranded, 1000 ft. Reel. Wire Colors (120 Volt): Red, Black, White, Green. O.D.: .486"

Category: Aluminum Armor - Stranded Copper Conductors

D'Versibit, Quick Change, Starter Kit

Category: Flexible Steel Drill Bits

Precision Screwdrivers Feature Rotating Caps For Optimum And Precise Control, Color Coded Rings For Easy Spotting Of Each Tip Type, Over-Sized Cap Markings For Quick Identification Of Tip Size, Cushion-Grip™ Handles For Maximum Comfort When Working On Small Equipment, Heat Treated And Precision-Machined Tip For Greater Strength, Set Contains Tamperproof Torx® Bits T6H, T8H, T10H And T15H (Cat. Nos. 6303, 6313, 6323, 6333), Compatible With Security Systems, Small Electronics And More, Torx® Is A Registered Trademark Of Acument Intellectual Properties, LLC

Category: Screwdriver Sets

Bit Extension, Length: 12", Hex Shank Size: 7/16" (111mm), Fits Arbors: 18-1-1/8 - 18-1-1/4, 45-7/8 - 45-1-1/2, 61/62PTS-1-1/8, 61/62PTS-1-1/2, 62PTS-5/8 - 62PTS-1, 66PT-3/4 - 66PT-1-1/2, 149G-1 - 149G-3, 37155 & 37156

Category: Drill Bit Extensions

GFI Circuit Tester, Compatible Circuits: 120V AC, Features: Tests GFCIs for Proper Operation & Verifies Wiring Configuration

Category: Receptacle Testers

True RMS Clamp Meter, Tightsight Series, 400 Amp, 600 Volt AC Provides True RMS AC Voltage, Measures AC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature And Senses AC Voltage, Built-In Probe Tip Holder, Backlit Display, Includes: Soft Case, Test Leads, Batteries And K-Type Thermocouple

Category: AC Clamp Meters

Reel Spindle for Greenlee 687 Reel Stand, Length: 62", Diameter: 2-3/8", Weight Capacity: 5,000 lbs

Category: Wire Reel Spindles

SIMpull 12/3 THHN/THWN-2 Stranded Copper, 600 Volts, Thermoplastic Insulation/Nylon Sheath, Heat, Moisture, Gasoline and Oil Resistant II, Rated Both THHN/THWN-2 and THWN-2, Also Rated MTW And AWM, SIMpull® Technology For Easier Pulling, Black/White/Green, 600 Ft. CoilPak

Category: 12 AWG Stranded Copper THHN

KT 8 Professional Round Cable Cutter, Capacity: 6 AWG

Category: Coax Cable Cutters

Hole Saw Kit, Diameters: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 3", 3-5/8", 4-1/8", 4-1/2", Conduit Sizes: 1/2" - 4"

Category: Hole Saw Kits

SIMpull 12 THHN/THWN-2 Stranded Copper, 600 Volts, Thermoplastic Insulation/Nylon Sheath, Heat, Moisture, Gasoline and Oil Resistant II, Rated Both THHN/THWN-2 and THWN-2, Also Rated MTW And AWM, SIMpull® Technology For Easier Pulling, Blue, 1000 Ft. CoilPak

Category: 12 AWG Stranded Copper THHN