"ab-1010uc the austin co."

Gooseneck Camera, 6 mm X 1 m, IP67 Waterproof & Dustproof, Compatible With The ET500 & ET510 Borescopes, Includes Camera Attachments: Mirror, Magnet & Camera Guide ***Discontinued***

Category: Cordless Inspection Camera Accessories

These bits work with all Klein Tools 2-in-1 (67100), 10-in-1 (32477), 11-in-1 (32500) and 10-Fold (32535-32539) Screwdrivers. Precision-machined tips for exact fit into the fastener. Includes two bits with T6 and T7 TORX® tips.

Category: Multi-Bit Screwdrivers

Delivers up to 2X longer life vs. traditional straight LENOX reciprocating saw blades. Optimizes the bladeÆs angle of attack for faster cutting in a variety of materials. T2Ö Technology and precision applied titanium coating help dissipate heat making blades last longer. Titanium coating makes teeth more wear-resistant so they stay sharp for quicker cuts.

Category: Titanium Edge Wood Cutting Reciprocating Saw Blades

MTR/PO 240V UG W/200A 7 PT, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

Bussed Gutter and Termination Cabinets, 400 A, 3R, 10 kAIC, #4 - 600 MCM, 5/16" mounting holes for load lugs, Galvanized steel, 3Ø/4W, (2) 1/0-250 MCM cables, NEMA type 3R, 3Ø/4W, 24" surface mount, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

Main Service Module, Main Fusible Switch, 800 Amp, 3-phase, 100kaic With Class Tfused, Fuse Not Included, Main And Neutral Lugs Included, 120/208 Vac, Bottom Feed, Aluminum Bus Material, NEMA 3 - Rainproof Enclosure, With Pull Box, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

Cable Runway Ceiling Support Kit has a variety of components to support ladder rack from the ceiling. This Ceiling Support Kit Rack-to-Runway Bracket Kit, LRWSBK item finish Plated with a material of Steel.

Category: Cable Tray - Runway Support Kits

Circ-a-w 217mtbpms15 100a Mtr skt&po, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray, CT46CPSS item measures 4.00x6.00in with a material of SS304 finish Brushed.

Category: Wireway Closure Plates

A rigid steel pedestal with die-cast aluminum base and mounting holes for bolting to the floor. This Bolt-Down Pedestal, AP33B88 item measures 33.00x8.00x8.00 inches with a material of Steel color Gray.

Category: Industrial Consolet Pedestals

OZ-Gedney Type SUEC Edge Conduit Clamp, 1/2 IN Cable, Cable Type: Rigid Conduit, Malleable Iron, Steel Nuts And Bolts, Finish: Clamp: Hot Dip Galvanized, Hardware: Mechanically Galvanized, For Securing Rigid Conduit Across The Beam, Channel And Ang

Category: Malleable Iron EMT Edge Type K-Clamps

Contact Block Portion for the C400 Series.

Category: Starter & Contactors - Enclosure - Controls

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.91" (23.1

Category: Male Nylon Insulated Wire Disconnects

The cable tie tool in red installs standard, heavy-standard, light-heavy, and heavy cross-section cable ties. It is an inexpensive, maintenance-free, all-purpose tool with an ergonomic handle design and short handle span. It also features a top-loading fe

Category: Cable Tie Tools

Braided Expandable Sleeving, 0.13" diameter (3.2mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 1000 ft. per reel.

Category: Braided Expandable Sleeving

The 4-way adhesive backed cable tie mount in white is mounted with acrylic adhesive tape. It is 0.50" long x 0.50" wide (12.7 x 12.7 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with m

Category: Cable Tie Bases

The masonry push barb cable tie mount in black, made of impact modified, weather-resistant nylon 6.6 uses a fir tree hole mounting method. It requires a hole diameter of 0.31" (7.9 mm) and is designed for use in indoor and outdoor environments. It is used

Category: Cable Tie Bases

The 57 Series strobes are heavy-duty, double flash strobe lights designed for use in general signaling applications. 2.3 Million peak candela.

Category: Non-LED Beacon - Strobe

Eaton main fusible switch, 600A, Aluminum, NEMA 3R, Overhead, Class T, 100 kAIC, Four-wire, Three-phase, Barrier kits: 400A-800A fusible switches: Bottom feed-3MFSBBK, Top feed-3MFSTB, 120/208V, (2) #4 AWG-600 kcmil, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

The extra heavy cable tie mount in green is applied with a #10 (M5) screw. It is made of polypropylene for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

CUT UTRS213BE MTR SKT, 200A, RINGLESS, OH/UG,GRND CONN. UL, HUB OPENING, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

ProTek Rack Angles support 19in rack equipment in the single and double-hinged ProTek product. This ProTek Rack Angles Square, PTRA36S item measures 33.25 19U with a material of Steel finish Plated.

Category: NEMA 4 Wall Mount Enclosures

C-H MB48B200BTSG 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution