"fp301-3/16-100-black-spoo"

3/8 inch, 90° Flex Connector, 1/2 inch, KO, With Insulated Throat, Material: Zinc Die Cast.

Category: 90 Degree Two Screw Squeeze Flex Connectors

8-Piece Combination Wrench Set. Includes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16".

Category: Combination Wrench Sets

General Purpose Electrical Tape, Vinyl, 3/4 Inch x 66 Feet, Brown

Category: Color Coding Tape

Junction Box, NEMA 4, Hinged Cover, 6 x 4 x 3 Inch, Steel/Gray

Category: NEMA 4 Wall Mount Enclosures

Aluminum Cord Connector, Straight, NPT Hub Size: 3/4 Inch, Cord Range: 0.375 Inch - 0.500 Inch, Color: Blue.

Category: Straight Aluminum Cord Grips

10 Amp, Power Supply. SDN Series. 3-Phase. Rated Input Voltage: 340 - 576V AC & 450 - 820V DC. Rated Output Voltage: 24V DC (22.5 - 28.5V DC). Rated Output Current: 10 Amps (240 Watts). H x W x D: 4.88" x 3.50" x 4.55".

Category: 1-Phase DC Power Supplies

3-Phase Supply Voltage, 440 - 480V AC, NEMA 1, Wall Mount Drive. 3-Phase Output, Normal Duty: 10 Hp, Heavy Duty: 7.5 Hp, Normal Duty: 14 Amp, Heavy Duty: 11 Amp, Frame Size: R2: H: 19.8" W: 5.1" D: 9.4"

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

Push-In Wire Connector, 3-Ports, 600V, Conductor Range: 14 to 10 AWG, Color: Blue. Package of 50.

Category: 3-Port Push-In Wire Connectors

3/4 Inch Steel; Liquidtight Strain Relief Cord and Cable Connector: Straight; Color Coded Label: Purple; Cable Range 0.375" - 0.500"

Category: Straight Steel Cord Grips

Split Grounding Bushing, 3/4 Inch Diameter, 14 - 4 AWG, Zinc Die Cast, For Use With Threaded or Unthreaded Rigid/IMC/EMT Conduit

Category: Threadless Ground Bushings

440/480V AC, Replacement Coil, Freedom Series. For use with NEMA Size 3 & IEC Frame Sizes L - N

Category: Starter & Contactor Replacement Coils

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Clear, Shrink Ratio: 2:1, Size: 3/64", Expanded Insulation Diameter: 0.046", Recovered Insulation Diameter: 0.023", Tube Length: 48". Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

440/480V AC, Replacement Coil, Citation & Freedom Series. For use with Citation Series NEMA Sizes 3 (Series A1), 4 & 5. Also for with Freedom Series NEMA Sizes 4 (Series A1 & B1) & 5 (Series A1 & B1) & Freedom Series IEC Frame Sizes P, R, S.

Category: Starter & Contactor Replacement Coils

3/4", Knockout Seal, Snap-In, Non-Metallic, Package Quantity: 50.

Category: Non-Metallic Knockout Seals

50 Amp, 3-Pole Series C NEMA F-Frame Molded Case Circuit Breaker, Type HFD, Cable In/Cable Out, 65 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only.

Category: 600V Rated Molded Case Circuit Breakers

30 Amp, 3-Pole, Miniature Industrial Circuit Breaker, Type QBHW, Quicklag, Bolt-On, 22 kAIC, 120/240 VAC

Category: 3-Pole 120/240V Bolt-On Circuit Breakers

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

POWER-STRUT FITTING, 3-25/32"x 1-15/16"x 3-9/16", EG

Category: Post Base Strut Channel Connectors

3-Phase Supply Voltage, 208-240V AC, Wall Mount Drive, 3-Phase Output, NEMA 1, Normal Duty: 2 Hp, Heavy Duty: 1.5 Hp, Normal Duty: 7.54 Amp, Heavy Duty: 6.6 Amp, Frame Size: R1: H: 14.69" W: 4.92" D: 8.78"

Category: 240 Volt AC Operated General Purpose Variable Frequency Drives

Sealing Fitting, Vertical/Horizontal, 3/4 Inch, Female, 25% Fill, Aluminum, For Use With Rigid/IMC Conduit in Close Turing Radius.

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Tmax Breaker Frame Size XT1N 125 Thermal Magnetic Fixed 70-700, 3-Pole Fixed+ Front Flat Terminals

Category: 480V Rated Molded Case Circuit Breakers

Mounting Body, EDS Type, (2) 3/4 Inch Hubs, 1-Gang, Feed-Thru, Explosion-Proof, Dust-Ignitionproof, Furnished with Internal Ground Screw, Aluminum

Category: Explosion-Proof EDS Mounting Bodies

Non-Metallic Liquidtight Connector, Straight, 3/8 inch, UV Rated Plastic, Sealing Ring, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA

Category: Straight Non-Metallic Liquidtight Flex Connectors