"f4p ilc500-6 f4p"

Assembled Jumper Bar with IP20 Protection. 2 Pole. 41 Amp. Type: BJMI8. Used with M 6/8 blocks.

Category: Terminal Block Jumper Bars

Base Spacer, 6 Inch x 3 Inch, Non-Metallic

Category: PVC Conduit Spacers

ORT OR-KT2-J6IV IVORY

Category: Snap-In Cat 6 Jack Inserts

4 Port Stacked Lug 800 - 300 MCM Stacked Lugs are large size set screw connectors with wire holes stacked on top of each other to minimize the width of the connector. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts (2000V max. per UL486B). UL486A/B Listed. Temperature rating 90 degrees C. Mounting hole spacing is NEMA standard of 1.75".

Category: 4-Conductor Aluminum Mechanical Lugs

Slope Trim, Gimbal, 6 in, White

Category: Recessed Lighting Slope Trims

Appliance Switch, Feed Thru Switch, Rotary Type, SPST, On-Off, 6 Amp @ 125V AC or 3 Amp @ 250V AC. Color: Brown Switch/Ivory Wheel.

Category: Feed Through Cord Switches

N1 Hinge Cover w/KO's - 12 x 12 x 6 - Steel/Gray

Category: Hinge Cover NEMA 1 Junction Boxes

BUS BK/GLR-1-6/10 BUS SMALL D

Category: GLR In-Line Fuses

5-6/10 Amp Pin Indicating Type Fuse, Dual-Element, Time-Delay, 125V

Category: Time Delay Midget Fuses

BUS BK/MDL-V-6/10-R BUS SMALL

Category: Electronic Time Delay Fuses

BUS BK/MDA-6-1/4-R BUS SMALL

Category: Electronic Time Delay Fuses

5-6/10 Amp Time-Delay Midget Fuse, 13/32" x 1-1/2", 500V, TRON, 10,000A Interrupting Rating, Fibre Tube, Nickel Plated Brass Endcaps, For motor control transformers and other circuits with in-rush currents

Category: Time Delay Midget Fuses

1-6/10A 300V Inline Fuse For HLR Holder Non-Rejecting, Time Delay Fuse

Category: GMF In-Line Fuses

6.3 Amp, Fuse, North American Style, 500 Volt AC, High Speed, Ferrule, 6 x 32mm, 50kAIC

Category: Semiconductor Fuses

RC610, Horizontal Mount, (100) Marking Cards, Legend: 41 - 60, Even/Odd. For use with 6 mm Terminal Blocks.

Category: Terminal Block Horizontal Marking Cards

The right angle base in black accepts a flat cable width of 3.0" (76.2 mm) and is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and comes in packages of 100.

Category: Cable Tie Bases

Butt Splice, Copper, Standard Barrel, 600 kcmil Cable

Category: Standard Barrel Copper Compression Sleeves

Impact XPS® 35 Pc. Impact Bit Set, Designed Exclusively For High-Torque Impact Drivers, Includes: (2) 1-3/4" Magnetic Nutsetters, (1) 2-3/8" Insert Bit Holder, (25) 1" Insert Bits, (6) 2" Power Bits, (1) 1/4" Socket Adapter

Category: Drill Bit Sets

ISO Metric Thread Type, Hub Size: M63, Cable Diameter: 1.560 - 1.69 Inch, Material: Aluminum, NEMA 6

Category: Aluminum Cable Glands

Eaton QB GFCI circuit breaker,Ground fault circuit breaker,40A,10 kAIC,Single-pole,120/240V,Non-Interchangeable,5 mA Trip sensitivity,#8 Cu, #8–6 Al,QBGF

Category: Ground Fault Bolt-On Circuit Breakers

Fuse Holder, 1-Pole, DIN Rail Mount, 32 Amp, 690 Volt AC, Finger Safe, 6 per carton

Category: Midget Finger Safe / Dead Front Fuse Holders

OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 1 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-1/2 IN Base Diameter X 2-15/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC

Category: Iron Rigid Conduit Elbows

Wide Range Distribution Grip Pulls No. 6 Copper to No. 477 ACSR 0.162 to 0.883-Inch (4.11 to 22.42 mm) Cable, 20-Percent Lighter Than the Cat. No. KT4500 Grip, One-Handed Design Makes for Easier Actuation, Spring Closes Grip on Cable to Hold the Initial Position, Made in the USA, Large Opening in the Handle Acommodates a Wide Variety of Hooks on Hoists, Winches and Tackle Blocks, Max Safe Load of 5000-Pound (2268 kg)

Category: Wire Pulling Guides

Heat Shrink Tubing, Thin Wall, 1/4 Inch, Expanded Inner Diameter 0.250 Inch, Recovered Inner Diameter 0.125 Inch, 2:1 Shrink Ratio, 48 Inch Lengths, Flexible Polyolefin, Black

Category: Thin Wall Heat Shrink