"b610-05-044-06 jmc steel group"

Threaded Conduit Nipple, 1-1/4 Inch x Close, Stainless Steel

Category: Stainless Steel Conduit Nipples

Conduit Locknut, 4 Inch, Threaded, Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

2-gang No Device Blank Wallplate, Standard Size, 302 Stainless Steel, Strap Mount, - Stainless Steel

Category: 2-Gang Blank Wallplates

Square Box Cover, 4 Inch Square x 1 Inch Raised, Pre-Galvanized Steel, Center Blanked with Tapped Ears on 2-23/32 Inches Centers

Category: 4" Square Metallic Box Fixture Covers

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: Stainless Steel Wall Mount Enclosures

Conduit Locknut, 1/2 Inch Diameter, Hardened Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Wall Mount Enclosure, NEMA 4X, Hinge Cover With Additional Quarter Turn Latches, 36 x 36 x 12 Inch, Stainless Steel 304

Category: Stainless Steel Wall Mount Enclosures

Square Box Surface Cover, 7.5 Cubic Inches, 4-11/16 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with Two Toggle Switches

Category: 4-11/16" Square Metallic Box Covers

CERNO GROUP 06-210-24-DWCL27K

4 Inch Square, Exposed Work Cover, Type: (2) Single Receptacles, 1/2 Inch Raised, Drawn, Metallic, Cubic Inches: 5.0, Opening Diameter: 1-13/32 Inch

Category: 4" Square Metallic Box Covers

Flex Tray Wire Basket Tray, Electroplated Zinc Galvanized Steel, 71.5" actual area inside tray, 4" H x 18" W x 10' Longs

Category: Straight Wire Basket

Washer, Square, Size 1-1/2 Inches x 1-1/2 Inches, Bolt Size 3/8 Inch, Thickness 3/16 Inch, Electro-Galvanized Steel

Category: Strut Channel Washers

Conduit Locknut, 1 Inch Diameter, Threaded, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Conduit Locknut, 3 Inch, Threaded, Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

3/4 EMT RAINTIGHT COMPR CONN INSUL

Category: Steel Raintight EMT Compression Connectors

STEEL EMT SS CONN INSUL 1-1/4IN

Category: Steel EMT Set Screw Connectors

3/4" Clear Coated Stainless Steel Flexible Conduit, 25 Foot Coil.

Category: Flexible Coated Stainless Steel Conduit

A-I-06-S-BB5001-S-BAC-ZBTM-20 A-I-06-S-BB5001-S-BAC-Z-BTM-2 0C/8K

Junction Box, NEMA 4X, Clamp Cover, Wall Mount, 30 x 30 x 8 Inch, Stainless Steel Type 304

Category: Stainless Steel Clamp Cover Junction Boxes

Panel For Concept Enclosure, 24 Inch x 20 Inch, Material: Steel, Finish: Conductive

Category: Enclosure Back Panels

Steel, Prewired Plugmold, Length: 6 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (6) 20A, 125V: Single Circuit, Single Outlets

Category: Single Circuit Steel Plugmold

30.5 mm, Heavy-Duty, Pilot Device Enclosure, Gray, Steel, Surface Mount, 4 Element, 2 Contact Block Depth, NEMA 12, 13.

Category: Steel Pilot Device Enclosures

3 Inch EMT Conduit, Steel, 10 Foot Length

Category: Straight Steel EMT Conduit

CRO S1003 THREE GNG SHT STEEL

Category: Steel FS & FD Device Box Covers