"sa10lw maverick power"

Power-Stud® Wedge Expansion Anchor, 3/8 x 3 Inch, Zinc Plated Carbon Steel

Category: Hammer-In Wedge Anchors

Power Bit, #8-10 Square, Point Size: #2, Length: 4", Includes: (2) Bits.

Category: Square Head Insert / Power Bits

Incoming Power Kit, 3', for LEDBarkit

Category: Fixture Power Cords

30 Amp 120V, 1-Phase, Unmetered Surface Mount, Top Feed, NEMA 3R, Receptacles: (1) NEMA TT-30R, Breakers: None

Category: Unmetered Temporary Power Outlets

Type CH Surge Protective Device, 2 Pole, 10 kAIC, PON

Category: Surge Breakers

Crankcase Heater. For use with all air-cooled products. *** Recommended for generators installed in regions where the temperature regularly falls below 32°F ***

Category: Generator Cold Weather Kits

100 Amp Class RK5 Dual-Element, Time-Delay Fuse, 600V, Fusetron, Current-Limiting, 10 Second (minimum) at 500% rated current; 200,000A Interrupting Rating

Category: Class RK5 Power Fuses

Power Relay, 20 Amp SPDT, 24 Vac/dc/120 Vac Coil, NEMA 1 Housing

Category: Enclosed Power Control Relays

Power Defense Door Handle, Emergency Lockable Handle & Mechanism, PD2 Global, Power Defense, Frame J-K, 600 V, Power Defense, Frame 2

Category: Molded Case Circuit Breaker Operating Mechanisms & Handle Shafts

LED Light Bar Linking Cable, 18 Inch, Dimming, The Dim Version Of The Linking Cables And Seamless Connector Link All Connections (Ac Power; 12V Aux Power; 0-10V Dim Signal) From Light Bar To Light Bar. Use These Items To Control All Light Bars From One Sensor Or Incoming Cable Connection. The NODIM Version Of These Items Only Links The Ac Power. Use These Items To Ac Power All Light Bars With A Single Power Feed; But Separate Control Signals Into Individual Groups *Sold Individually*

Category: Extensions/Linking/Connectors

Incoming power kit: 10FT Power/starter cord for LEDBARKIT w/internal driver.

Category: Fixture Power Cords

Power Bit, #6 Square, Point Size: #1, Length: 6", Includes: (2) Bits.

Category: Square Head Insert / Power Bits

M18™ TOP-OFF™ 175W Power Supply, Delivers Faster Simultaneous Power To Personal Devices & Small Electronics, Fits All M18™ Batteries, DC Output 1: USB-A port: 5V/2.4A (12W) or 9V/1.67A (15W), DC Output 2: USB-C PD port: 5/9/12/15V 3A (45W), AC Output: 120V Receptacle (175W Continuous)

Category: 18 Volt Cordless Tool Batteries & Chargers

Transformer, Buck/Boost, 500 VA, 3-Phase, 120/240 x 16/32 Volt AC, NEMA 3R

Category: Up To 500 VA Buck-Boost Transformers

WMD EAL164 HANGER CLAMP ASSBL ATTACH POLE TO ANCHOR POINT ABOVE CEILING

Category: Tele-Power Pole Mounting Kits

Power Bit, #6 Square, Point Size: #1, Length: 2", Includes: (2) Bits.

Category: Square Head Insert / Power Bits

Power Bit Contractor Pack, #2 Phillips, Shockwave, Length: 1", Includes: (25) Bits.

Category: Phillips Head Insert / Power Bits

LEDBarKit-Internal Driver (PRO Series) Light Bar: Length: 43.3", Flex Watt/Flex Color: Product offers 9 SKUs in 1 unit which can easily be configured to 3 different wattage packages and 3 different CCTs. Wattage: 10/15/25, Lumens 1260-3400, Color Temperature: 2700/3000/3500. 0-10V Dimming. Various mounting clip options with integrated rare-earth magnets for easy placement in all style fixtures. Connect up to 40 light bars on one incoming power cable. *Need to order power cord for start of run. Options: RP-LBI-G1-IP-3F-DIM (3' Power cord only) or RP-LBI-G1-IP-10F-DIM (10' Power cord only), or RP-LBI-G1-IP-2F-120V-SW (2ft Power cord w/switch), or RP-LBI-G1-IP-7F-120V-SW (7ft Power cord with switch).

Category: LED - Strip Fixtures

LED Light Bar Linking Cable, 6 Inch, Dimming, The Dim Version Of The Linking Cables And Seamless Connector Link All Connections (Ac Power; 12V Aux Power; 0-10V Dim Signal) From Light Bar To Light Bar. Use These Items To Control All Light Bars From One Sensor Or Incoming Cable Connection. The NODIM Version Of These Items Only Links The Ac Power. Use These Items To Ac Power All Light Bars With A Single Power Feed; But Separate Control Signals Into Individual Groups *Sold Individually*

Category: Extensions/Linking/Connectors

Flush Mount Kit. For use with CHSPT2ULTRA, CHSPT2MAX, CHSPT2MICRO, CHSPTELE, CHSPCABLE.

Category: Surge Protection Device Enclosures & Flush Mount Kits

Phase Adaptive Dimming Power Pack: External Fault Protection; Provides phase dimming control for 2-wire dimming fluorescent, electronic low voltage, incandescent, and magnetic low voltage loads. See .pdf Catalog Page for Specifications. Model #: nPP PCD EFP

Category: Dimmer Power Packs

Power Bit, Hex Shank Size: #2 Square, Length: 4", Color: Red.

Category: Square Head Insert / Power Bits

Power Bit, # 3 Square, Length: 4", Color: Black.

Category: Square Head Insert / Power Bits

Vacuum, Cordless, Power Requirements: M18 Battery, Tank Size: 2 Gallon, Hose Diameter: 1-1/4", Voltage: 18, Weight: 9.4 lbs, Includes: Filter (49-90-1900), Crevice Tool (31-01-2100), Wide Utility Nozzle (31-01-2110), Wireless Vinyl Hose (14-37-0160), & Vacuum. No Battery Included.

Category: Heavy Duty Cordless or Corded Wet/Dry Vacs