"wb22-8-120"

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 14° Lens & (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

8 Ft. LED Vaportight Fixture, 100 Watt, 120-277V, 85 CRI, 13240 Lumens, Color Temperature: 4000K, 0-10V Dimming

Category: LED - Vaportight

8" 1550LM Round Downlight, 14 Watt, 120 Volt, Color Temperature: 4000K, Replacement Wattage: 85, Lumens: 1550, CRI: 80, Diameter: 8.7", Dimmable

Category: 8" Recessed LED Downlights

8" 1550LM Round Downlight, 14 Watt, 120 Volt, Color Temperature: 3000K, Replacement Wattage: 85, Lumens: 1550, CRI: 80, Diameter: 8.7", Dimmable

Category: 8" Recessed LED Downlights

8 Watts Per FT, 120 Vac, cut-to-order

Category: Wet Area Heat Cable

Deep Strut w/ Slotted Holes, 1-5/8" x 1-5/8" x 10', Steel (12 Gauge), Hot Dip Galvanized, 9/16" x 7/8" Slotted Holes

Category: Steel Strut with Elongated Holes

200 AMP, 120/240V AC, 1-Phase, Plug On Neutral, Main Circuit Breaker Loadcenter, 60-Space, 120-Pole, Aluminum Bus, Cover: Surface, NEMA 3R - Rainproof. Dims: H: 39", W: 14.31", D: 5.19"

Category: 1-Phase Main Breaker Aluminum Bus Load Centers

Wireway Fitting, Type 1, Hinged Cover, Size/Dims: 8" x 8" x 96", Material/Finish: Steel/Gray.

Category: Hinged Cover Wireway

Photoelectric Sensor, E51 Limit Switch Style, Diffuse Reflective, 8 Inch (200 Mm) Sensing Range, Infrared Beam, 120 Vac, Terminal Wiring, N.o. And N.c. Complementary Output

Category: Photoelectric Limit Switch Sensor Heads

D26 Series Type M 600 Vac Multipole Relay With Convertible Contacts, Ac Relay, 8-pole, 5no - 3nc Contacts, 120 Vac/ 60 Hz - 110 Vac/ 50 Hz Coil

Category: Open Power Relays

CMC TYPE E FVNR B-MMP C-CONT 8 - 32 A STD 110/50 120/60

Category: Combination Manual Motor Controllers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); Optional 300 to 1000°C (572 to 1832°F), Includes: Infrared Camera, (1) 76° Lens, (1) 14° Lens, (1) 24° & (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin for Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 14° Lens & (1) 24° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); Optional 300 to 1000°C (572 to 1832°F), Includes: Infrared Camera, (1) 76° Lens & (1) 14° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin for Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Burndy; Crimping Tool; Patriot; Battery Actuated, Hydraulic Self Contained; Weight: 10.9 Lb; Battery Type: Ni-mh; Battery Rated Capacity: 2.6 Amp-hr; Accessories: Pt208620 Lanyard, Wdietree W Die Holder, Bat18v Hi-capacity Replacement Battery, Patchgr18v (120 Vac) Charger; Recharge Time: Less Than 45 Mint; Covered Head: No; Battery Voltage: 18 V; Dieless: No; Number Of Conductors Accomidated (max): 8 Awg - 600 Kcmil Copper Stranded (ya, Ya-l,ys, Ys-l); 8 Awg - 350 Kcmil Flex;8 - 350 Kcmil Aluminum (ya-a And Ys-a); Die Accommodation: W Dies; Operating Pressure: 7800 Psi; Width: 3-1/2 In; Length: 14.5 In; Height: 13.75 In; Force Developed: 6 Ton; Operating Voltage: 18 Vdc

Category: Wire Crimping Tools

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 24° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); Optional 300 to 1000°C (572 to 1832°F), Includes: Infrared Camera, (1) 76° Lens, (1) 14° Lens & (1) 24° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin for Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); Optional 300 to 1000°C (572 to 1832°F), Includes: Infrared Camera, (1) 76° Lens, (1) 24° Lens & (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin for Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Thermal Imager, Temperature Range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); 300 to 1500°C (572 to 2732°F), Includes: Infrared Camera, (1) 86° Lens, (1) 14°, (1) 24° Lens & (1) 42° Lens, Small Viewfinder Eyecup, 2 Batteries, Battery Charger, Hard Transport Case, Lanyards, Front Lens Cap, Power Supplies, Printed Documentation, SD Card (8 GB), Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C), License Card: FLIR Thermal Studio Pro (3 Month Subscription) + FLIR Route Creator Plugin For Thermal Studio Pro (3 Month Subscription)

Category: Thermal Imagers

Eaton CH thermal magnetic circuit breaker,Type CH 3/4-Inch neutral switching circuit breaker,20 A,10 kAIC,Three-pole,120/240V,CH,Common breaker trip,#14-8 AWG Cu/Al,CH,Type CH Loadcenters,Switching neutral

Category: Residential 3-Pole Circuit Breakers

Eaton locking plug, Flat cable, #16-8 AWG, 30A, Industrial, 120/208V, Back wiring, Black, white, Ultra grip, L21-30, Four-pole, Five-wire, Nylon

Category: 30 Amp NEMA Twist Lock Single Receptacles

Eaton Arrow Hart ultra grip locking connector, Flat cable, #16-8 AWG, 20A, Industrial, 120/208V, Back wiring, Black, white, Ultra grip, L21-20, Four-pole, Five-wire, Nylon

Category: 20 Amp NEMA Twist Lock Single Receptacles

HCF-90 Healthcare Facilities Cable, With Ground And Neutral, 2 Conductors, 12 AWG Conductor And Ground, Solid Copper, Outside Diameter: 0.489 IN, 600 V, 90 DEG C (Dry), THHN Insulation, Moisture Resistant Fire Retardant Paper Wrap Shield, Galvanized Interlocking Steel Strip (Green Striped) Armor, Color: 120/208 V: Red, White, Green, 250 FT Coil, Weight: 220 LB/1000 FT, UL 4, 83, 1479, 1581, 2556 File Number E7330, NEC 250.118(8), 300.22(C), 392, 320, 517.13, 518, 645, Federal Specification A-A-59544 (Formerly J-C-30B), Meets OSHA And HUD Requirements, ISO 9001 Certified

Category: Solid Conductor Armored Health Care Facilities Cable

Core and coil transformers for machine tool applications are used to provide voltage to control devices in applications where regulation and minimum space are important. Fully encapsulated coil is impervious to moisture-Pressure plate terminals ensure secure connections-Terminal board is anchored in the epoxy for greater reliability-Wide variety of fusing options-Rugged, high-impact plastic terminal board-Full head 8 brass screws assure quick, easy terminations with maximum connection integrity-Copper windings -Flexible design allows inp ut or ou tput volta ge to ma tch a ny app lication-CUL, CE, UL approvals-Available fuse-clips offer simple, low-cost fusing with terminal block models and minimum space are important. 58K1803

Category: 60 - 100 VA Industrial Control Transformers